Please select Into the mobile phone version | Continue to access the computer ver.
Is my TXT file OK? New FW update on my P3 Professional
Uploading and Loding Picture ...(0/1)
o(^-^)o
Tizzy
lvl.3
Flight distance : 1307247 ft

United States
Offline

Here is my TXT file for the firmware update on my Phantom 3 Professional.  Does it indicate any problems?  Thanks, John.
Flight status says it is ready to fly and video looks good.  Motors, without props, spun up with no errors.


========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.02.0006.bin

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.02.0006.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.05.0030.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin, P3X_FW_V01.05.0030.bin
Result: Forbidden.
Multiple version firmware bin files are detected. Please delete the redundant bin file.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.05.0030.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.05.0030.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.05.0030.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Success.

========== 2016.04.26 14:01:24 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.26 14:45:36 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.26 15:56:56 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Upgrading ...
Result: Success.



2023-5-14
Use props
Tizzy
lvl.3
Flight distance : 1307247 ft

United States
Offline

I did a bench test and everything seemed ok.  Took a short test flight and still everything seems ok.

The text file looks ok to me, but what do I know about DJI log files?  It looks like some repetition, like it kept trying until it got everything right.  I look forward to other interpretations.

I think I got a good Phantom 3 Professional.  I like it.
2023-5-15
Use props
Tizzy
lvl.3
Flight distance : 1307247 ft

United States
Offline

This is a post from another thread, here: https://forum.dji.com/thread-43451-1-1.html

How to Tell if a Firmware Upgrade was Successful

Hi everyone! In this post, I will show you how to judge whether or not a firmware upgrade was successful or is being applied successfully. The instructions here apply to the P3 and Inspire series.
  
  
Method 1: Listen to the Sounds Coming from the Aircraft. (Reliability: ★★★)
  
D = One Beep
  
Upgrading: ‘DDDD-DDDD-DDDD…’
  
Upgrade succeeded: ‘D-DD, D-DD, D-DD…’
  
Upgrade failed: ‘DDD-DDD-DDD…’
  
  
Method 2: Watch the Gimbal Indicator. (Reliability: ★★★★)



  
  
If the indicator flashes quickly (0.2s off, 0.1s on), the aircraft is warming up.
  
If the indicator flashes green once every 0.9 seconds (0.5s off, 0.4s on), it’s taking a single picture.
  
If the indicator flashes green three times quickly (0.3s off, 0.1s on), it’s taking a 3 or 5 photo multi-shot.
  
If the indicator flashes red slowly, (1.6s on, 0.8s off), it’s recording video.
  
If the indicator flashes red quickly (0.5s off, 0.2s on), there’s an SD card error.
  
If the indicator double blinks red (0.1s on, o.1s off, 0.1s on, 0.1s off), the camera is overheated.
  
If indicator is solid red, there’s a system error.
  
If the indicator flashes red and green alternatively (0.8s green on, 0.8s red on…), the firmware is upgrading.
  
  
Method 3: Check the Text File on the SD Card. (Reliability: ★★★★★)
  
After upgrading the aircraft, a text file titled ‘result.txt’ file will be generated on the SD card. Open the text file and you can see five possible “results."


  
  
   1.      Successful   
  
   2.      Aborted      
  
   3.      Corrupted     
  
   4.      Failed     
  
   5.      Upgrading      
  
If it the result line says “Upgrading,” the process was interrupted. The aircraft needs at least 30 minutes to finish upgrading.
  
  
In cases 1 and 2, the upgrade was applied successfully. In case two, there should be another sentence notifying you that the firmware of your aircraft is already the latest version, and it is unnecessary to upgrade.
  
  
In Case 3, the upgrade file is damaged or there is a problem with your SD card. It is recommended to format the SD card or replace it with another one, re-download the upgrade file, and try to upgrade again.
  
  
In Case 4, there may have been some the extra files on the SD card other than the upgrade file. If the problem remains with only the one bin file on the SD card, please contact with the DJI customer service.
  
  
In Case 5, it is because the upgrading process was interrupted accidently. Please try to upgrade the firmware again.
  
If there is no result file on the SD card, you may have one of the following issues.
  
1.  The format or the name of the file was incorrect. The format has to be .bin, and do not change the name of the file or else the aircraft won’t be able to recognize it.
  
2. The file was stored in wrong location. Place the file in the root directory of the SD card.
  
3. Wrong upgrade file was on the card. For example, you may have downloaded firmware for the Phantom 3 Advanced when trying to upgrade your Professional.
  
4. You upgraded straight to the latest firmware without first upgrading to a previous one. For an example: the original firmware version is 1.18 and the newest version is 1.6. To upgrade from 1.18, you need to upgrade the firmware to first 1.3.20 before upgrading to 1.6.
  
5. The SD card is damaged and the aircraft is unable to recognize it. Please try to replace it with another card.
  
6. The gimbal has failed to read the card. If upgrading fails repeatedly, contact customer service to repair your gimbal.
  
  
Hope this helps you with upgrading!



2023-5-16
Use props
djiuser_2QuxG3ERCCfj
New

Mexico
Offline

Tizzy Posted at 5-16 06:51
This is a post from another thread, here: https://forum.dji.com/thread-43451-1-1.html
How to Tell if a Firmware Upgrade was Successful
Hi everyone! In this post, I will show you how to judge whether or not a firmware upgrade was successful or is being applied successfully. The instructions here apply to the P3 and Inspire series.  

hola tengo el mismos problema se inicia actualizacion termina con las luces todo bien pero al revisar el archivo txt me queda solo en upgrading.
terminando todo esto lo pongo a volar y vuela bien sin ningún anuncio de precaución solo que al grabar el video el resultado dela gravacion se be que bivra la imagen como un efecto gelatina ya probe los metodos de revisar el gimbal y ajustar la pequeña tuerca que tiene para el gimball aqui dejo los txt

Packet: P3XW_FW_V99.99.9999.bin
Upgrading ...

========== 2023.05.02 16:10:14 =====================
Packet: P3XW_FW_V99.99.9999.bin
Upgrading ...

========== 2023.05.04 22:09:52 =====================
Packet: P3XW_FW_V99.99.9999.bin
Upgrading ...

========== 2023.05.08 20:46:55 =====================
Packet: P3XW_FW_V99.99.9999.bin
Upgrading ...

========== 2023.05.08 21:13:56 =====================
Packet: P3XW_FW_V99.99.9999.bin
Upgrading ...

========== 2023.05.08 21:31:51 =====================
Packet: P3XW_FW_V99.99.9999.bin

========== 2023.05.09 21:43:21 =====================
Packet: P3XW_FW_V99.99.9999.bin
Upgrading ...

========== 2023.05.13 12:08:07 =====================
Packet: P3XW_FW_V99.99.9999.bin
Upgrading ...

========== 2023.05.14 16:57:25 =====================
Packet: P3XW_FW_V99.99.9999.bin
Upgrading ...

========== 2023.05.16 18:45:48 =====================
Packet: P3XW_FW_V99.99.9999.bin
Upgrading ...
2023-5-16
Use props
Tizzy
lvl.3
Flight distance : 1307247 ft

United States
Offline

Hi.  Thank you for posting.  I was feeling lonely in here.

I got a TXT file that looks like yours when I updated the FW in my Phantom 3 Standard.  I don't know how to interpret the name P3XW_FW_V99.99.9999.bin - it is not meaningful to me.  However, there is another log file created during an update that may have better information.

There is another LOG file in a hidden directory on the SD card called /MISC/LOG. This file contains further detailed information on each hardware module within the P3 that’s updated. Useful if something goes wrong.   To see this log file you have to set your computer to view hidden files.

Maybe you can find the other log file and find information to help you.  Good luck, John.
Here is a link to another thread that talks about the hidden log file:

https://forum.dji.com/thread-29857-1-1.html


2023-5-18
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules