Please select Into the mobile phone version | Continue to access the computer ver.
Integra and Avata issues
227 1 5-18 10:54
Uploading and Loding Picture ...(0/1)
  • >>>
United States

With my V2 goggles the avata works perfect, Just got the Integra and updated everything, now it says " not connected to fly app" and has the "no m mode fly to far/high message" when u fly about 20 feet up  

5-18 10:54
Use props
DJI Paladin
Flight distance : 318 ft


Hi there. Thank you for reaching out and we're sorry for the trouble. To comply with the RID request of the FAA, after the new firmware, the US users need to connect the DJI Avata to DJI Fly app every time they power on the Avata to fly. It needs to be connected to the App once to verify the RID, please make sure that the GPS and internet are connected. Regarding the error message, for safety reasons, the aircraft cannot use the "M" Mode in the following situations:

1. Flying in a restricted area, the M mode cannot be triggered even after applying for unlocking GEO Zone;

2. When the altitude of the aircraft exceeds 120 meters, the M mode cannot be triggered;

Please avoid the above situations. If you are not sure whether the location you flying is a restricted zone or not, please send us the Latitude and longitude coordinates, We are more than happy to assist you with further checking. Thank you for your understanding and cooperation.
5-18 17:59
Use props
You need to log in before you can reply Login | Register now

Credit Rules