I have a problem with a DJI RC Plus on an agras T40, it turns on the red light and the blue light together, as if there were problems with calibration and low battery, but the battery is at 100% and the control does not complete the calibration, has anyone had this kind of problem?

Hi there, could you please provide us with a video for further confirmation? You can upload the video to Dropbox or Google Drive and then send us the link here.

Here's the link to the video.

I noticed that the red and blue LEDs are flashing, but calibration has already been done, the entire battery pack has been changed and, as shown in the video, it is at 100%

https://drive.google.com/file/d/1y6JOwHOFXVK1sF0FYP2bz4y97zu1nr-c/view?usp=sharing

MatheusVerniz Posted at 5-20 10:35
Here's the link to the video.

I noticed that the red and blue LEDs are flashing, but calibration has already been done, the entire battery pack has been changed and, as shown in the video, it is at 100%

I am sorry that the video only shows the error message and did not record the calibration process. Do you have any other video? About the red and blue LEDs, do you mean the indicator lights on the aircraft or on the RC Plus?

Here is a link to another control with this error, only the control has this problem.

The two lights are flashing together (red and blue), resulting in the purple color on the controller.

https://drive.google.com/file/d/1ytULODVH8crJD3syfcr8ozWy4ypkaFjh/view?usp=drivesdk