I have some nice tablets and wondering it is working with RC-N1...

The OG mavic 3 came bundle with the rcn1. So only makes since it will work with the mavic 3 pro since they share the same body. Only difference is the camera. I got mine mavic 3 pro to bind with the rcn1. When trying to bind, the remote must be 1 feet from the drone. I tried binding when the remote was like 5 feet away and it would not detect the drone. Try many times and it never bind. Then I move the remote 1 feet from the drone and it bind right away.

djiuser_zKR5HFX3a2EC Posted at 5-23 10:45
The OG mavic 3 came bundle with the rcn1. So only makes since it will work with the mavic 3 pro since they share the same body. Only difference is the camera. I got mine mavic 3 pro to bind with the rcn1. When trying to bind, the remote must be 1 feet from the drone. I tried binding when the remote was like 5 feet away and it would not detect the drone. Try many times and it never bind. Then I move the remote 1 feet from the drone and it bind right away.

Are you sure? DJI is telling me that Mavic 3 Pro does not support RC N1.

Geo_Drone Posted at 5-23 10:52
Are you sure? DJI is telling me that Mavic 3 Pro does not support RC N1.

Whoever told you it doesnt work doesnt know what he is talking about. My rc controller is sent to dji for repair. So i am using the rcn1 flying my mavic 3 pro. You have to bind it first to use it.

Yeah RC-N1 works fine.

Geo_Drone Posted at 5-23 10:52
Are you sure? DJI is telling me that Mavic 3 Pro does not support RC N1.

It's not unusual for DJI support people to give out misinformation.

Labroides Posted at 5-23 16:47
It's not unusual for DJI support people to give out misinformation.

It's unusual for them to contribute anything useful towards the conversation.

• 15% - Incorrect information
• 15% - Obvious, goes without saying information.
• 70% - Copy/pasted word salad that means nothing.
  

Hi, Geo_Drone. Thank you for reaching out. The RC-N1 is compatible with DJI Mavic 3 Pro. Just make sure that the firmware of the RC is v04.18.0100 or higher. Hope this helps.

djiuser_zKR5HFX3a2EC Posted at 5-23 11:20
Whoever told you it doesnt work doesnt know what he is talking about. My rc controller is sent to dji for repair. So i am using the rcn1 flying my mavic 3 pro. You have to bind it first to use it.

Thanks man.
Good info. My tablets will be happy.

DJI Gamora Posted at 5-23 19:45
Hi, Geo_Drone. Thank you for reaching out. The RC-N1 is compatible with DJI Mavic 3 Pro. Just make sure that the firmware of the RC is v04.18.0100 or higher. Hope this helps.

Tks, please inform the chat team also

Geo_Drone Posted at 5-23 21:13
Tks, please inform the chat team also

Hi, Geo_Drone. We'll take note of this and forward it to the relevant team. Thank you for your kind understanding.

I used it with an iPad 11" as well as an iPad 12.9" and it works flawlessly! Great for planning waypoint flights...! Take care!

CanonMax Posted at 6-2 00:58
I used it with an iPad 11" as well as an iPad 12.9" and it works flawlessly! Great for planning waypoint flights...! Take care!

Thanks,
I also purchased one RC N1 now as I have a tablet Samsung S8 Ultra 14" and works great (I see everything very clear).
I just wait for my Mav 3Pro to arrive...and check the lenses, I have a feeling that will be exchanged 3-4 times because of poor optics )))))

If you compare the Mavic 3 and the Mavic 3 Pro in the DJI store they list the RC-N1 for both.