Please select Into the mobile phone version | Continue to access the computer ver.
Integra binding problem
184 7 6-4 11:41
Uploading and Loding Picture ...(0/1)
o(^-^)o
Dimokl
lvl.1

Israel
Offline

Recently purchased Integra Goggles + controller 2 + 03 unit drone and cannot bind it together. Seems that Integra have a problem - when pushing a power button to start binding there is no beeps -when i push it for 3-5sec its just blinking, if i do it more time it's just turns off. And yes, I've activated the Integra and the controller. Any suggestions ? Thanks.
6-4 11:41
Use props
DJI Wanda
Administrator
Offline

Hello, there. Sorry for the inconvenience. May we double confirm that you are using DJI RC Motion 2 or DJI FPV Remote Controller 2?  For the pairing process of the DJI Goggles Integra, would you please record a video for us?
6-4 23:14
Use props
Dimokl
lvl.1

Israel
Offline

Hello, yes I'm trying to bind integra with fpv controller 2 and o3 unit . I've activated and upgraded all 3 components to the latest versions. And seems to be no difference between push the power button on integra for a second to see the battery status or pushing it for a while - no beeps , just flashing or power off.  Where can I upload video ? Thanks
6-4 23:41
Use props
DJI Wanda
Administrator
Offline

Dimokl Posted at 6-4 23:41
Hello, yes I'm trying to bind integra with fpv controller 2 and o3 unit . I've activated and upgraded all 3 components to the latest versions. And seems to be no difference between push the power button on integra for a second to see the battery status and pushing it for a while - no beeps , just flashing or power off.  Where i can upload video ? Thanks

You may upload it to a cloud drove, for example, Google  Drive or Dropbox, and then open the authority to all so that we can access the video.
6-5 00:50
Use props
Dimokl
lvl.1

Israel
Offline

DJI Wanda Posted at 6-5 00:50
You may upload it to a cloud drove, for example, Google  Drive or Dropbox, and then open the authority to all so that we can access the video.
Thanks for your assistance.
There is the link :
https://drive.google.com/file/d/1J91HLOgMkKP741Pd2jiTG9dsvBBzF2xg/view?usp=drivesdk
6-5 01:14
Use props
DJI Wanda
Administrator
Offline

Dimokl Posted at 6-5 01:14
Thanks for your assistance.
There is the link :
https://drive.google.com/file/d/1J91HLOgMkKP741Pd2jiTG9dsvBBzF2xg/view?usp=drivesdk

Thank you for that. We checked your video and the pairing mode of DJI Goggles Integra indeed was not triggered after long pressing the power button. May we confirm other devices, saying aircraft and DJI RC Motion 2 work normally?
If so, you are advised to send the DJI Goggles Integra only back to the service center for diagnosis.
6-5 04:50
Use props
Dimokl
lvl.1

Israel
Offline

DJI Wanda Posted at 6-5 04:50
Thank you for that. We checked your video and the pairing mode of DJI Goggles Integra indeed was not triggered after long pressing the power button. May we confirm other devices, saying aircraft and DJI RC Motion 2 work normally?
If so, you are advised to send the DJI Goggles Integra only back to the service center for diagnosis.

Hello, thanks again for your help. I am not quite sure about, cause it's my first drone (Flywoo Explorer LR 4 HD DJI O3). Pairing between fpv controller and the drone seems to be ok - the corresponded led is green and I can hear beeps when  switch to manual mode, press C1, but nothing else( i.e. no motors rotating). And the o3 unit gets pretty hot, is it normal ?
6-5 05:22
Use props
DJI Wanda
Administrator
Offline

Dimokl Posted at 6-5 05:22
Hello, thanks again for your help. I am not quite sure about, cause it's my first drone (Flywoo Explorer LR 4 HD DJI O3). Pairing between fpv controller and the drone seems to be ok - the corresponded led is green and I can hear beeps when  switch to manual mode, press C1, but nothing else( i.e. no motors rotating). And the o3 unit gets pretty hot, is it normal ?

If the drone is a DIY one, we are unable to offer suggestions for you. You may inspect the installation or consult other professionals.
As for the heating issue of the O3 Air unit, the air unit may become hot during or after the operation. Do not touch the air unit before it cools down.
Do not use the air unit for an extended period when the temperature is high or there is poor ventilation. When the air unit is powered on, it automatically enters the low-power state to avoid overheating. The air unit enters the low-power state to avoid overheating, which negatively affects performance.
6-5 23:02
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules