Please select Into the mobile phone version | Continue to access the computer ver.
Remote ID Statement (07/01/2023)
107937 373 2023-6-30
Uploading and Loding Picture ...(0/1)
o(^-^)o
Monkeyboy
lvl.1
Flight distance : 31545 ft
United States
Offline

Question is to the manufacturer DJI, "When will you submit a declaration of compliance to the FAA for their approval", for the Mavic Air 2?

Even with an up-to-date firmware load your drone is not compliant until it has an FAA-approved declaration of compliance on the website.
2023-10-17
Use props
DJI Gamora
Administrator

Offline

Monkeyboy Posted at 10-17 07:41
Question is to the manufacturer DJI, "When will you submit a declaration of compliance to the FAA for their approval", for the Mavic Air 2?

Even with an up-to-date firmware load your drone is not compliant until it has an FAA-approved declaration of compliance on the website.

Hi, Monkeyboy. Thank you for reaching out. We apologize for the inconvenience caused. Rest assured that the Mavic Air 2 supports FAA RID requirements from the firmware version V01.01.16.00, while it takes time to have this update on the FAA Official Website due to the changes in the format of the materials required by the FAA to apply for RID compliance. DJI is actively communicating with the FAA in a timely manner, and it is expected that  Mavic Air 2 will be announced on the FAA website soon. Thank you for your understanding and support.
2023-10-18
Use props
Monkeyboy
lvl.1
Flight distance : 31545 ft
United States
Offline

DJI Gamora Posted at 10-18 21:41
Hi, Monkeyboy. Thank you for reaching out. We apologize for the inconvenience caused. Rest assured that the Mavic Air 2 supports FAA RID requirements from the firmware version V01.01.16.00, while it takes time to have this update on the FAA Official Website due to the changes in the format of the materials required by the FAA to apply for RID compliance. DJI is actively communicating with the FAA in a timely manner, and it is expected that  Mavic Air 2 will be announced on the FAA website soon. Thank you for your understanding and support.

Hi, I appreciate you reaching out with an answer to my question.
Thanks,
2023-10-19
Use props
djiuser_4DAJht8kvPQC
lvl.1

United States
Offline

I'll believe DJI's software upgrade WHEN I see it!!
2023-10-20
Use props
DJI Gamora
Administrator

Offline

Monkeyboy Posted at 10-19 07:27
Hi, I appreciate you reaching out with an answer to my question.
Thanks,

You're most welcome, Monkeyboy. Please don't hesitate to reach us if you have any inquiries or concerns. Thank you for your valued support.
2023-10-21
Use props
Jacektfc
lvl.3
Flight distance : 4819055 ft
  • >>>
Poland
Offline

What about DJI o3 air unit ?
2023-10-22
Use props
DJI Gamora
Administrator

Offline

Jacektfc Posted at 10-22 02:41
What about DJI o3 air unit ?

Hi, Jacektfc. Thank you for reaching out. The DJI O3 Air Unit does not have a built-in GPS module, so it does not support this function.
2023-10-22
Use props
WFM
New

United States
Offline

Responding for points......
2023-10-23
Use props
BenVCarlson
lvl.2

Belgium
Offline

Hi, I couldn't decode the S/N of my Mini 3 Pro using this tool (14 chars allowed, my S/N is 20 chars long ???) but found a date printed on the box saying 2022/08
I guess this is then the manufacturing date of the device ...August 2022...
Would this explain why, despite up-to-date firmware, I can't see any RID broadcast from the device, as per this discussion only devices manufactured after sept. 16, 2022 have RID support ?
It is not entirely clear to me if MP3's manufactured after 09/16 have "built-in" RID support because they ship with up-to-date firmware implementing RID or because they have the necessary hardware to implement it; IOW is updating the firmware on pre-09/16 devices sufficient to implement RID ? Or is RID support hopeless on these older units because they lack some hw ?.... (I do need RID in my area despite being EU "Class C0") see also this discussion)

2023-10-24
Use props
djiuser_LRNt9UYEE9dB
New

United States
Offline

This sucks know I have to plug my headset up t to my phone  to the dji fly app ever time I want to fly. This sucks, Thanks alot Dji. This sucks
2023-10-24
Use props
Bischi999
lvl.1
Flight distance : 58661 ft

Switzerland
Offline

Hello everyone.
I'm from Switzerland and will be on vacation in Florida in mid-November.
I have a Mavic Air2 with a smart controller and have made the latest updates.
( App 1.12.2 / Aircraft 01.01.1600 / Controller 01.01.0072 )
Unfortunately there is no option to enter the remote ID in the Smartcontroller.
Has anyone already done it and can help me?
Or is that only possible when I'm in the USA?
Best regards Michael
2023-10-25
Use props
fansdd51741e
New
Flight distance : 33199 ft
United States
Offline

I have a mavic air is this not the same thing as remote Id it seems promising but I don’t think it’s doing anything it says remote Identification I tried to add photo
2023-10-25
Use props
BenVCarlson
lvl.2

Belgium
Offline

BenVCarlson Posted at 10-24 04:10
Hi, I couldn't decode the S/N of my Mini 3 Pro using this tool (14 chars allowed, my S/N is 20 chars long ???) but found a date printed on the box saying 2022/08
I guess this is then the manufacturing date of the device ...August 2022...
Would this explain why, despite up-to-date firmware, I can't see any RID broadcast from the device, as per this discussion only devices manufactured after sept. 16, 2022 have RID support ?

Dear DJI,

can you please confirm that for a Mini 3 Pro manufactured before 09/16 (2022), a firmware update is enough to implement Remote ID functionality ?
(and that if my up-to-date M3P doesn't broadcast anything, it's a device malfunction ?)

Thank you
2023-10-25
Use props
DJI Gamora
Administrator

Offline

BenVCarlson Posted at 10-25 23:16
Dear DJI,

can you please confirm that for a Mini 3 Pro manufactured before 09/16 (2022), a firmware update is enough to implement Remote ID functionality ?

Hi, BenVCarlson. Thank you for reaching out. Can you please confirm if this is for USA FAA Remote ID? If yes, the Mini 3 Pro supports FAA RID requirements with the factory firmware version. The FAA RID will only be broadcasted once you're in the USA. Hope this helps.
2023-10-26
Use props
BenVCarlson
lvl.2

Belgium
Offline

DJI Gamora Posted at 10-26 02:51
Hi, BenVCarlson. Thank you for reaching out. Can you please confirm if this is for USA FAA Remote ID? If yes, the Mini 3 Pro supports FAA RID requirements with the factory firmware version. The FAA RID will only be broadcasted once you're in the USA. Hope this helps.

No, it's for the EU
The EU regulation do not require Remote ID for Class C0 UAS, HOWEVER the CTR where I used to fly adds its own requirement that mandates Remote ID for any UAS flying in category Open A1 regardless of the Cx class, as from 01/01/24
See https://forum.dji.com/forum.php? ... 559&pid=3156906
2023-10-26
Use props
djiuser_PegXocQnhxep
lvl.1
United States
Offline

Any updates or time estimates for phantom 4 pro v2.0 compliance?? Where is DJI in this process? Is it DJI or FAA that is holding up the compliance declaration at this point?
2023-10-28
Use props
loflybyP4
lvl.1

United States
Offline

Thank you for this information. Is the DJI O3 Air Unit coming with built-in remote ID capabilities? If not, is it planned to have it via software updates?
2023-10-28
Use props
loflybyP4
lvl.1

United States
Offline

Pete Toemmes Posted at 7-5 16:22
How is DJI handling flying a remote ID compliant drone indoors when GPS and/or tethered smart device location services (GPS) is unavailable?

An unifiable brick is not an acceptable answer

You don't need RID indoors. Technically, you are not inside the NAS.
With that being said, it becomes a grey area when you are flying commercially inside a stadium for example, where the building is partially covered with a roof.
2023-10-28
Use props
DJI Gamora
Administrator

Offline

BenVCarlson Posted at 10-26 08:21
No, it's for the EU
The EU regulation do not require Remote ID for Class C0 UAS, HOWEVER the CTR where I used to fly adds its own requirement that mandates Remote ID for any UAS flying in category Open A1 regardless of the Cx class, as from 01/01/24
See https://forum.dji.com/forum.php?mod=redirect&goto=findpost&ptid=299559&pid=3156906

Hi, BenVCarlson. Thank you for the clarification. As of this writing, the Mini 3 Pro does not support Remote ID in the EU region.
2023-10-29
Use props
DJI Gamora
Administrator

Offline

djiuser_PegXocQnhxep Posted at 10-28 06:10
Any updates or time estimates for phantom 4 pro v2.0 compliance?? Where is DJI in this process? Is it DJI or FAA that is holding up the compliance declaration at this point?

Hi, djiuser_PegXocQnhxep. Thank you for reaching out. For Phantom 4 pro v2.0, firmware upgrade with RID compliant will be available by December 31, 2023 at the latest.
2023-10-29
Use props
DJI Gamora
Administrator

Offline

loflybyP4 Posted at 10-28 13:20
Thank you for this information. Is the DJI O3 Air Unit coming with built-in remote ID capabilities? If not, is it planned to have it via software updates?

Hi, loflybyP4. Thank you for reaching out. The DJI O3 Air Unit does not have a built-in GPS module, so it does not support this function.
2023-10-29
Use props
BenVCarlson
lvl.2

Belgium
Offline

DJI Gamora Posted at 10-29 03:56
Hi, BenVCarlson. Thank you for the clarification. As of this writing, the Mini 3 Pro does not support Remote ID in the EU region.

Thank you
And....is there any chance to see this support added in a not too far away future via a firmware update ?

(Otherwise I'll have to resell the unit ASAP (before people overhere realize this model is no longer allowed to fly in large portions of the territory after 01/01/24 due to CTR requirements))
2023-10-30
Use props
Jacektfc
lvl.3
Flight distance : 4819055 ft
  • >>>
Poland
Offline

What about DJI o3 airunit ?
2023-11-5
Use props
DJI Wanda
Administrator
Offline

Jacektfc Posted at 11-5 12:50
What about DJI o3 airunit ?

Hello, there. You may refer to DJI Gamora's reply.
https://forum.dji.com/forum.php? ... 343&pid=3165235
2023-11-6
Use props
ReiTumber
New

United States
Offline

What about the Phantom 4?
2023-11-15
Use props
mgphoto
lvl.3
Flight distance : 2906398 ft
United States
Offline

We received the RID update for the Mavic 2 Enterprise Advanced a month ago but I still don’t see the UAS Declaration of Compliance listed with the FAA.
Is there a tracking number associated with the declaration?
2023-11-16
Use props
Monkeyboy
lvl.1
Flight distance : 31545 ft
United States
Offline

DJI Gamora Posted at 10-18 21:41
Hi, Monkeyboy. Thank you for reaching out. We apologize for the inconvenience caused. Rest assured that the Mavic Air 2 supports FAA RID requirements from the firmware version V01.01.16.00, while it takes time to have this update on the FAA Official Website due to the changes in the format of the materials required by the FAA to apply for RID compliance. DJI is actively communicating with the FAA in a timely manner, and it is expected that  Mavic Air 2 will be announced on the FAA website soon. Thank you for your understanding and support.

Any announcement of when the Mavic Air 2 will be on the FAA website as compliant?
I know you said this is in the works, but the firmware was downloaded around Sept. 27th. this year.
So, I cannot register as compliant until this shows up on FAA as compliant....
I hope any day...
2023-11-16
Use props
UAViator53
Second Officer
Flight distance : 692090 ft
  • >>>
United States
Offline

Any updates for the Phantom 4 Pro v2.0 yet?
2023-11-19
Use props
djiuser_a5L8LdyWVCgW
New
Flight distance : 111214 ft
United States
Offline

My Air 2 did not receive the remote id update. I have 01.01.1600 firmware but does not indicate remote id
2023-11-19
Use props
DJI Susan
Administrator
Offline

djiuser_a5L8LdyWVCgW Posted at 11-19 18:24
My Air 2 did not receive the remote id update. I have 01.01.1600 firmware but does not indicate remote id

Hi there, the firmware V01.01.16.00 is the latest version for Mavic Air 2 to support FAA RID. Please also make sure to update the DJI Fly app as well. Thank you.
2023-11-19
Use props
DJI Gamora
Administrator

Offline

Monkeyboy Posted at 11-16 21:50
Any announcement of when the Mavic Air 2 will be on the FAA website as compliant?
I know you said this is in the works, but the firmware was downloaded around Sept. 27th. this year.
So, I cannot register as compliant until this shows up on FAA as compliant....

Hello, there. We're sorry that we haven't received any information related to this matter. Please stay rest assured that we're continuously working on this situation. We thank you for your understanding.
2023-11-20
Use props
ReiTumber
New

United States
Offline

Is the DJI Phantom 4 receiving the update or is it too old?  I just want to know before buying a remote ID device.
2023-11-20
Use props
djiuser_a5L8LdyWVCgW
New
Flight distance : 111214 ft
United States
Offline

DJI Susan Posted at 11-19 22:23
Hi there, the firmware V01.01.16.00 is the latest version for Mavic Air 2 to support FAA RID. Please also make sure to update the DJI Fly app as well. Thank you.

Thanks, I got it to work. Did not work on and older Android version.
2023-11-23
Use props
DJI Gamora
Administrator

Offline

djiuser_a5L8LdyWVCgW Posted at 11-23 13:10
Thanks, I got it to work. Did not work on and older Android version.

Thank you for the update. We're glad that everything has been sorted out! Please feel free to reach us anytime.
2023-11-23
Use props
fansfdb11483
lvl.1
Flight distance : 154 ft
United States
Offline

What is the status for the original Mavic Air?
2023-12-4
Use props
DJI Susan
Administrator
Offline

fansfdb11483 Posted at 12-4 08:06
What is the status for the original Mavic Air?

Hi there, we are sorry that there is no firmware update for RID compliance for Mavic Air. We encourage you to consider purchasing a separate broadcast module to ensure compliance with remote ID regulations. Thank you for your understanding.
2023-12-4
Use props
djiuser_4DAJht8kvPQC
lvl.1

United States
Offline

DJI did in fact release an upgrade for the Mavic Pro 2, I think the date was 11/23/2023, so they met their deadline. Major problem: at last check (12/4/2023) DJI does NOT have an official DOC on file with the FAA. It is highly questionable whether the upgrade is legal. So far (12/5/2023) neither DJI nor the FAA has commented.
2023-12-5
Use props
TVeyeGuy
New
Flight distance : 11719 ft

United States
Offline

Will there be a firm ware update for the Phantom 3 Standard or will it be able to use the Phantom 4 update when available?  If no firm ware update, is there an add on module capatible for the Phantom 3?
Thanks in advance
2023-12-5
Use props
Nafisgal
lvl.1
Flight distance : 3726460 ft
Spain
Offline

Will this firmware update make the M2P no longer able to be piloted with the DJI Pilot flight app?
2023-12-9
Use props
H4 Services
lvl.2
Flight distance : 2620623 ft
United States
Offline

Are there plans to make the Inspire 2 Remote ID compliant in the US?
2023-12-10
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules