Overview
Date: 2024.09.05
DJI RC 2 Remote Controller Firmware: v02.07.0000
DJI Fly App Android: v1.14.0

What’s New
Added support for DJI Neo.
Fixed some known issues.

---

Overview

• Date: 2024.07.26
• DJI RC 2 Remote Controller Firmware: v02.02.0300
• DJI Fly App Android: v1.13.9
  

What’s New

• Fixed some known issues.
  

---

Overview

• Date:2024.06.27
• DJI RC 2 Remote Controller Firmware:v02.02.0200
• DJI Fly App Android:v1.13.9
  

What’s New

• Added support for Enhanced Transmission in some countries and regions.
• Fixed some known issues.
  

---

Overview

• Date: 2024.04.11
• DJI RC 2 Remote Controller Firmware: v02.02.0000
• DJI Fly App Android: v1.13.0
  

What’s New

• Added support for DJI Goggles 3.
• Added support for the updated FlyShare for fast file transfer directly from remote controller to your phone.
• Added support for independent app update without the need to simultaneously update remote controller firmware.
  

---

Overview:

• Date: 2024.01.24
• DJI RC 2 Remote Controller Firmware: v02.00.0500
• DJI Fly App Android: v1.12.8
  

What’s New

• Adds a display zoom setting that supports larger text display, enabling clearer presentation of critical flight information.
• Introduces Before You Fly section that provides information on flight compliance requirements and important considerations for drone flights at different locations.
• Adds support for searching information on product usage, tutorial videos, and flight guides for specific areas.
  

---

Overview:

• Date: 2023.12.21
• DJI RC 2 Remote Controller Firmware: v02.00.0300
• DJI Fly App Android: v1.12.4
  

What’s New

• Added support for saving screenshots and recordings on any microSD card installed in the remote controller, increasing ease of export. Enter the Home page of DJI Fly, tap Profile > Settings > Storage, and set SD Card as the storage location.
• Fixed some known issues.
  

---

Overview:

• Date: 2023.10.30
• DJI RC 2 Remote Controller Firmware: v02.00.0100
• DJI Fly App Android: v1.12.3
  

What’s New

• Fixed issue of ineffective 120m flight altitude limit with Mini 4 Pro in the EU; added support to apply for flight altitude above 120 m.
  

---

Overview:

• Date: 2023.09.25
• DJI RC 2 Remote Controller Firmware: v02.00.0000
• DJI Fly App Android: v1.12.0
  

What’s New

• Added support to use with DJI Mini 4 Pro.
• Fixed some known issues.
  

---

Overview:

• Date: 2023.09.05
• DJI RC 2 Remote Controller Firmware: v01.00.0700
• DJI Fly App Android: v1.11.0
  

What’s New

• Fixed some known issues.
  

---

Overview:

• Date: 2023.07.25
• DJI RC 2 Remote Controller Firmware: v01.00.0500
• DJI Fly App Android: v1.11.0
  

What’s New

• Added support to download footage from the aircraft to the microSD card of the remote controller.
• Added support to play the original 4K video downloaded from the aircraft.
• Optimized video transmission.
• Fixed some known issues.
  

Now the RC2 is released is the DJI RC not getting any more updates?  It's still waiting for the 1.10 .0 app update.  

DAFlys Posted at 7-25 05:33
Now the RC2 is released is the DJI RC not getting any more updates?  It's still waiting for the 1.10 .0 app update.

I was wondering that also.  Seems like this update is lagging quite a bit behind when the Fly App update was released.  Nice that I can update the RC Pro upon a new App release but I think DJI can do much, much better in updating the RC quicker.,

DAFlys Posted at 7-25 05:33
Now the RC2 is released is the DJI RC not getting any more updates?  It's still waiting for the 1.10 .0 app update.

Hi, DAFlys. Thank you for reaching out. We currently don't have any information about this but please stay tuned to our official websites for updates. Thank you for your kind understanding.

DowntownRDB Posted at 7-25 11:25
I was wondering that also.  Seems like this update is lagging quite a bit behind when the Fly App update was released.  Nice that I can update the RC Pro upon a new App release but I think DJI can do much, much better in updating the RC quicker.,

RC Pro got a proper firmware update a couple of days ago too.

DAFlys Posted at 7-25 22:57
RC Pro got a proper firmware update a couple of days ago too.

I contacted DJI Support and they indicate that at the present time the Air 3 can only be flown by using the RC2 or RC N2 controllers.  Hopefully, that doesn't mean the RC Pro will not be compatible with future DJI drones.  

DowntownRDB Posted at 7-26 03:29
I contacted DJI Support and they indicate that at the present time the Air 3 can only be flown by using the RC2 or RC N2 controllers.  Hopefully, that doesn't mean the RC Pro will not be compatible with future DJI drones.

The new O4 uses a new radio frequency of 5.1ghz so it may be that it wont be compatible unless they make the Air3 fall back to O3 a bit like they did with the Air2S.

DAFlys Posted at 7-26 05:38
The new O4 uses a new radio frequency of 5.1ghz so it may be that it wont be compatible unless they make the Air3 fall back to O3 a bit like they did with the Air2S.

I've got a bad feeling that since the RC sold so well and now the updated RC2 has just been released that the RC Pro may soon no longer be offered.  I'm just glad that the RC2 has external antennas vice internal.  

DowntownRDB Posted at 7-26 14:44
I've got a bad feeling that since the RC sold so well and now the updated RC2 has just been released that the RC Pro may soon no longer be offered.  I'm just glad that the RC2 has external antennas vice internal.

How long though before we see more drones added to it for compatibility.

DAFlys Posted at 7-27 00:44
How long though before we see more drones added to it for compatibility.

Only time will tell.  Just seems awful early to abandon the RC Pro's use with future DJI Drone releases.  Don't think the pilots that just bought the Mavic 3 Pro with RC Pro combo will be too happy about it either.

DowntownRDB Posted at 7-27 03:35
Only time will tell.  Just seems awful early to abandon the RC Pro's use with future DJI Drone releases.  Don't think the pilots that just bought the Mavic 3 Pro with RC Pro combo will be too happy about it either.

Same thing happened with the Smart Controller and the Air2S combo.

DAFlys Posted at 7-27 04:19
Same thing happened with the Smart Controller and the Air2S combo.

You're exactly right.  

I still remember when I bought the Air 2 and within months the Air 2S was released.  Guessing that might happen to the Air 3 as well.  

DowntownRDB Posted at 7-27 13:36
You're exactly right.  

I still remember when I bought the Air 2 and within months the Air 2S was released.  Guessing that might happen to the Air 3 as well.

Air3S with a 1inch sensor?

DAFlys Posted at 7-28 02:35
Air3S with a 1inch sensor?

I would not doubt that one bit.  Would kind of following all the iterations with Mavic 3 went through.

DAFlys Posted at 7-26 05:38
The new O4 uses a new radio frequency of 5.1ghz so it may be that it wont be compatible unless they make the Air3 fall back to O3 a bit like they did with the Air2S.

5.1ghz isn’t showing up in the RC 2 transmission options here is the US. It may be for Europe only.

djiuser_9XPxXSMK9RLr Posted at 7-28 18:08
5.1ghz isn’t showing up in the RC 2 transmission options here is the US. It may be for Europe only.

this is from the official spec -

Operating Frequency
2.4000-2.4835 GHz
5.170-5.250 GHz
5.725-5.850 GHz

5.170-5.250 GHz can be used only in countries and regions where permitted by local laws and regulations.

DowntownRDB Posted at 7-28 12:40
I would not doubt that one bit.  Would kind of following all the iterations with Mavic 3 went through.

Im not sure if I can see an Air 3 Classic,  an Air 3 Cine and an Air3 Pro.   Actually maybe I could see a Pro on the cards.  

DAFlys Posted at 7-28 23:46
Im not sure if I can see an Air 3 Classic,  an Air 3 Cine and an Air3 Pro.   Actually maybe I could see a Pro on the cards.

I'm betting they at least release an Air 3S or maybe they'll call it an Air 3 Pro.

DowntownRDB Posted at 7-29 02:48
I'm betting they at least release an Air 3S or maybe they'll call it an Air 3 Pro.

Id wager a dollar on Air 3 Pro.

DAFlys Posted at 7-29 23:26
Id wager a dollar on Air 3 Pro.

No doubt that will be a safe bet.  Probably will come out within 8-10 months and make a lot of new Air 3 owners mad.  

DowntownRDB Posted at 7-26 14:44
I've got a bad feeling that since the RC sold so well and now the updated RC2 has just been released that the RC Pro may soon no longer be offered.  I'm just glad that the RC2 has external antennas vice internal.

They had a chance to lower the price

DAFlys Posted at 7-28 02:35
Air3S with a 1inch sensor?

It seems crazy to think this but the Air 2S came out a year after the Air 2.

I've been thinking should I hang on to my Air 2s for one more year and hope the Air 3s has the Mavic 3 Camera or just get a Mavic 3 Pro now...

Mini-G Posted at 7-30 05:10
They had a chance to lower the price

Indeed they did.  

DowntownRDB Posted at 7-30 04:36
No doubt that will be a safe bet.  Probably will come out with 8-10 months and make a lot of new Air 3 owners mad.

Im going with 6-8 months.

Mini-G Posted at 7-30 05:13
It seems crazy to think this but the Air 2S came out a year after the Air 2.

I've been thinking should I hang on to my Air 2s for one more year and hope the Air 3s has the Mavic 3 Camera or just get a Mavic 3 Pro now...

I think that heavily depends on your countries drone rules.   Here the Air3 and Mavic 3 Pro are too heavy and have to be kept 50-150m away from everything depending on which license you have.   

Hi all,

Just saw on a YouTube video that custom folders have been introduced.
Amazing! I posted about this ages ago and it's great to see.
Also custom file naming!!

DJI, is this a software feature of the DJI fly app and is it coming to other drones?

[img=2732,1533]blob:https://forum.dji.com/8aa8cb23-ba68-40e7-b21f-048a9acf0fec[/img]

DAFlys Posted at 7-30 06:17
Im going with 6-8 months.

No doubt your guess will be very close.  

Is the DJI RC2 using the same low budget MatTiler Maps as the DJI RC?

Electriflyer Posted at 8-3 00:26
Is the DJI RC2 using the same low budget MatTiler Maps as the DJI RC?

Hi there. Thank you for reaching out. DJI RC-2 uses MapTiler. MapTiler is used by default for mobile devices without a GMS service (mainly remote controllers with a built-in screen). Have a great day ahead.

Hi there.

I got a question. Since I updated the firmware, my remote has problems to connect to the wifi. (TP LINK AX73 and or AVM Fritzbo7590) The Problem is that the RC2 has random MAC adresses. How can I switch that of? Only if it takes the first used MAC adress when I installed it, it works.
Else it connects but does not get a DNS Server or Gateway.
So not able to get to the internet.
Any advice?

Any news when this is coming to the DJI RC controller,  it's missed a few of the updates now.  

(Double entry content deleted)

Dear DJI-Team,
after the latest firmware update, it appears that the additional drone led bottom light is no longer selectable for the C1/C2 buttons and neither anywhere else (if I am not doing something wrong).
Anyway, the Air 3 is superb!
Kind regards
Michael

DowntownRDB Posted at 7-27 03:35
Only time will tell.  Just seems awful early to abandon the RC Pro's use with future DJI Drone releases.  Don't think the pilots that just bought the Mavic 3 Pro with RC Pro combo will be too happy about it either.

That's what I got - from the sounds of it... this isn't too exciting after the money we spent on that fly more package

fansf1911a04 Posted at 8-6 13:07
Dear DJI-Team,
after the latest firmware update, it appears that the additional drone led bottom light is no longer selectable for the C1/C2 buttons and neither anywhere else (if I am not doing something wrong).
Anyway, the Air 3 is superb!

This is correct,  it's enforced by EU law that the bottom LED cannot be triggered remotely.  

DAFlys Posted at 8-7 10:08
This is correct,  it's enforced by EU law that the bottom LED cannot be triggered remotely.

Thank you very much for this (surprising) information.

So, can you tell under which conditions this LED will be lit as I do not see any setup options for it?

Thanks a lot for your help in advance!

are there any other bugs/anomolies with the recent updates?

T. Michael F. Posted at 8-7 12:55
Thank you very much for this (surprising) information.

So, can you tell under which conditions this LED will be lit as I do not see any setup options for it?

When the light levels are low it will come on during take off and landing.  

DAFlys Posted at 8-7 10:08
This is correct,  it's enforced by EU law that the bottom LED cannot be triggered remotely.

This sounds like a stupid EU rule IMPOV...

DJI Tony Posted at 8-4 00:04
Hi there. Thank you for reaching out. DJI RC-2 uses MapTiler. MapTiler is used by default for mobile devices without a GMS service (mainly remote controllers with a built-in screen). Have a great day ahead.

So that means that the satellite overlay on the DJI RC2 is as poor as the DJI RC?
According to MapTiler they currently have no maps of Google earth/maps quality for Australia. This controller is a waste of money.