Hi there

I just saw, that the green zoom rectangle is no more in the middle (where the white cross is) but slight in the left side. So they are no more aligned. How can I match them together again?
Its the Matrice 30t.
I'll send a picture as soon as get to it.

Further more- why is the "all lights off" button not on the short list anymore- it was very usefull..

Thanks, cheers

John

Nedemis Posted at 8-16 05:25
[view_image]

Depending on which zoom level is set, the center of the camera also changes. This is because the cameras are side by side.

pspec Posted at 8-16 09:33
Depending on which zoom level is set, the center of the camera also changes. This is because the cameras are side by side.

Ah- thank you. I was quite sure it was not so few wekks ago. But I might be mistaken...

Hi there,

I have the same offset lately on my M3T. Is there any reset possible to center the zoom preview window again?

Cheers Martin

Avi8tor Posted at 11-13 09:53
Hi there,

I have the same offset lately on my M3T. Is there any reset possible to center the zoom preview window again?

The same reason:
https://forum.dji.com/forum.php? ... 883&pid=3110351

I also have a mavic 3T and I understand that the cameras are in different locations therefore they will be looking different locations That's why the White x and the green box will be in different locations but the green zoom box is supposed to be where the zoom camera will be looking when you switch over to it but when you switch over to The zoom camera on my drone whatever you have the green box around is not what you're going to be looking at is there a way to calibrate this because it makes it very difficult to inspect something when it's looking in the wrong spot

Nedemis Posted at 2023-8-16 05:25
[view_image]

Has anyone found a fix for this ?