djiuser_hT1FqgZxrmDH Posted at 5-1 22:14
Hello! In this group, many people share the same problem as mine, and everyone says it appeared after the update from April 11, 2024! They have tried various cards, but the problem persists.

Hello.Can you send us your DJI account number via private message? We need to confirm this issue with the engineer.

Unfortunately, today I experienced problems again with a black screen on the RC2. This time not on the ground, but during flight. The mini 4 was perhaps 300 meters away (in an open field) when suddenly the screen of the RC2 went black, and no inputs were possible. It's a strange feeling when you completely lose control of the aircraft all of a sudden. The battery indicator LED of the RC2 was blinking green during this time.

DJI needs to solve this issue urgently! Until further notice, I will refrain from flying.

RC2 v02.02.0000
Fly v1.13.0
M4P v1.00.0500

DO NOT UPDATE!

THIS UPDATE WILL MAKE YOUR EXTENDED BATTERIES USELESS.

Monkieboy00 Posted at 5-13 14:51
DO NOT UPDATE!

THIS UPDATE WILL MAKE YOUR EXTENDED BATTERIES USELESS.

Useless how?

MKmini4 Posted at 5-13 10:02
Unfortunately, today I experienced problems again with a black screen on the RC2. This time not on the ground, but during flight. The mini 4 was perhaps 300 meters away (in an open field) when suddenly the screen of the RC2 went black, and no inputs were possible. It's a strange feeling when you completely lose control of the aircraft all of a sudden. The battery indicator LED of the RC2 was blinking green during this time.

DJI needs to solve this issue urgently! Until further notice, I will refrain from flying.

Exactly Same for me.

fichek Posted at 5-14 06:57
Useless how?

DJI is secretly disabling the aftermarket plus batteries in the firmware. And not selling the originals in Europe at the same time. Such a dick move

Lvisz Posted at 5-16 14:03
DJI is secretly disabling the aftermarket plus batteries in the firmware. And not selling the originals in Europe at the same time. Such a dick move

Why would you buy aftermarket batteries for a DJI drone? Especially since that breaks the EASA regulations and makes you liable for flying outside the designated category.

hello,
with all problems reported, when Will DJI listen to their customer that are blocked with this New firmware and propose the rolback to the previous version that was opérationnal ?
best regards.

The last 2 firmware updates for the drone and the RC 2 have been abysmal.
I'm not updating my drone until further notice, thank God I havent updated anything lately.

One has to wonder how one company can do such thing. It's like they are intentionally holding back the drone and even regressing it software-wise, instead of improving it further.

fichek Posted at 5-16 14:07
Why would you buy aftermarket batteries for a DJI drone? Especially since that breaks the EASA regulations and makes you liable for flying outside the designated category.

1. Because they’re not available in Europe
2. Because they’re a lot cheaper (and available)
3. I have an A1/A3 license to fly a C1 drone, so there’s no legal problem

Lvisz Posted at 5-18 09:08
1. Because they’re not available in Europe
2. Because they’re a lot cheaper (and available)
3. I have an A1/A3 license to fly a C1 drone, so there’s no legal problem

It doesn't magically become a C1 drone when you add aftermarket batteries though. That's probably the whole reason why they aren't officially available in EU as it would require manually re-classifying the drone. Read the EASA rules, you're not allowed to add anything to your drone except the official parts that come with it.

fichek Posted at 5-18 11:18
It doesn't magically become a C1 drone when you add aftermarket batteries though. That's probably the whole reason why they aren't officially available in EU as it would require manually re-classifying the drone. Read the EASA rules, you're not allowed to add anything to your drone except the official parts that come with it.

There’s a program where one can reclassify the 4 Pro to C1 through DJI, which is currently under review for mine. So, anything else you have to add?

Lvisz Posted at 5-18 13:07
There’s a program where one can reclassify the 4 Pro to C1 through DJI, which is currently under review for mine. So, anything else you have to add?

You’re still replacing the original components with aftermarket which is still against the law and makes your C1 label invalid.

fichek Posted at 5-18 14:10
You’re still replacing the original components with aftermarket which is still against the law and makes your C1 label invalid.

Any links for reference?

Lvisz Posted at 5-18 14:18
Any links for reference?

I'm too tired to look for specific section in the rulebook atm, but it's even displayed in the most basic info notices that every country's aviation authority distributes (you can download them here in all languages: https://www.easa.europa.eu/en/do ... information-notices), I'm surprised you are not aware of it:

Here's an English pdf for C0 label: https://www.easa.europa.eu/en/downloads/120845/en
And for C1 label: https://www.easa.europa.eu/en/downloads/120850/en
(Bottom right on page 2 in both documents.)

Lvisz Posted at 5-18 14:18
Any links for reference?

Couldn't sleep so found the following section in the Easy Access Rules available here: https://www.easa.europa.eu/en/do ... tems-regulations-eu

Just updated and noted the max altitude can now be increased to 500m.

Can anyone confirm?

Also noticed I no longer get satellites when turning it on and waiting inside my apartment, which is a little worrying..

Adr.Pettrov Posted at 5-7 10:41
Hello! I want to share that two of my friends are experiencing the same issue with hyperlapse, but they claim that the problem occurred after unlocking it at a height of 500 meters. As I reflect, before unlocking it, I didn't have any issues, and everything was working fine. However, after I unlocked it in the late afternoon and decided to shoot over the city in the evening, I noticed that the hyperlapse function wasn't working. Hopefully, this information helps in some way.

Any fix to hyperlapse problem? Still no response from DJI.

Another forum thread also has no answer
https://forum.dji.com/forum.php? ... D915%26typeid%3D915

im333 Posted at 5-20 09:53
Just updated and noted the max altitude can now be increased to 500m.

Can anyone confirm?

sure
just try ~500m - all fine for my bird )

RobZilla Posted at 2023-9-25 05:35
Nice, looking forward to some reviews with videos and photos of the new aircraft.  Hopefully the new RC2 will be compatible with older aircraft?!

Yes, it will be interesting to see reviews and media for the new aircraft. Fingers crossed that the RC2 will be compatible with older models!

djiuser_0etUMSF3u4Hs Posted at 5-17 00:12
hello,
with all problems reported, when Will DJI listen to their customer that are blocked with this New firmware and propose the rolback to the previous version that was opérationnal ?
best regards.

Hi, djiuser_0etUMSF3u4Hs. We'll take this as a suggestion and forward it to our relevant team. Thank you for your continued support. Moreover, can you please confirm if you're experiencing any issues right now?

djiuser_zgZSSEwjvIDd Posted at 5-17 03:13
The last 2 firmware updates for the drone and the RC 2 have been abysmal.
I'm not updating my drone until further notice, thank God I havent updated anything lately.

Hi, djiuser_zgZSSEwjvIDd. We're sorry to read about this. May we ask for a video showing the issue for us to check further?

im333 Posted at 5-20 09:53
Just updated and noted the max altitude can now be increased to 500m.

Can anyone confirm?

Hi, im333. Can you please try turning the device on outside your apartment to check if you'll get any satellites? Please keep us posted.

Genas Posted at 5-26 07:00
Yes, it will be interesting to see reviews and media for the new aircraft. Fingers crossed that the RC2 will be compatible with older models!

Hi, Genas. We'll take this as a suggestion and forward it to our relevant team. After the evaluation of the related department, significant suggestions or requests will be implemented via the firmware update, app update, etc. For any updates, please stay tuned to the latest news on our DJI official website at (www.dji.com) or by checking the Release Notes specific to your product. Thank you for your continued support.

Just updated my firmware on the Pro 4 and now have a gimble overload motor, with a code 1d010002, gimbal cover not on, no debris, not crashed, amd unable to calibrate after 40%.  I don't have refresh plan but within 12 months of buying this bit of kit.. any ideas on how to fix this.  Or will DJI fix this under the customer consumer act 2015 any help would ge appreciated

Version 1.13.4 has been released for the RC2 controller. The controller starts again as quickly as before the error. The N mode is also displayed correctly again. I hope that other errors have also been fixed. No update for the Mini 4 Pro. Only the Rc 2 has been updated.

Any updates???

fichek Posted at 5-16 14:07
Why would you buy aftermarket batteries for a DJI drone? Especially since that breaks the EASA regulations and makes you liable for flying outside the designated category.

I have a mini4pro C1 MTOM 342g!!!
These are legally manufactured batteries with certificates. They just don't have the DJI logo

DJI Gamora Posted at 5-27 05:08
Hi, djiuser_zgZSSEwjvIDd. We're sorry to read about this. May we ask for a video showing the issue for us to check further?

Hello Maybe we could focus on drone software patch 01.00.0500. Hyperlaps still works incorrectly with DJI Fly 1.13.5. It's not DJI Fly that's the problem!!!
Are you already testing the drone software version 01.00.0501?

It is no longer funny!!!
My mini4pro: DJI Fly ver. 1.13.5, drone software 01.00.0500, RC N2 software 01.00.0300
1. The hyperlasy function has not been working since April!!!
2. In Poland, MediaExpert offers the CAMERON SINO CS-DJM300RC 3850 mAh battery for DJI Mini 3/Dji Mini 3 Pro. The manufacturer states that it is a replacement for DJI: BWX162-2453-7.38 (80g) and BWX162-3850-7.38 (140g). DJI blocks foreign batteries?
3. Mini4pro batteries are not compatible with mini 3 drones! Strange, because they are compatible with mini3pro!!!

Fix this hyperlapse already

No problems here with hyperlapse.

MKmini4 Posted at 6-24 09:49
No problems here with hyperlapse.

Above 120m there is problem.

djiuser_exft5qzYsY2q Posted at 6-24 10:59
Above 120m there is problem.

What is the problem, tell me.

MKmini4 Posted at 6-24 09:49
No problems here with hyperlapse.

I fly DJI Mini4pro in the following configuration:
Mini4pro+RC N2+iPhone8+,
Mini4pro+RC N2+iPad9gen,
Mini4pro+RC N2+Samsung Tab9 .
DJI Fly version is 1.13.5. Drone software 01.00.0500, RC N2 software 01.01.0300.
When taking hyperlapses, the program hangs after taking one photo and then the image becomes black and white.

When presenting your flights, please write what versions of the DJI FLy, drone, RC N2 software you have.

Serg SSA Posted at 6-24 11:47
What is the problem, tell me.

See my post above

Piotr Pe Posted at 6-25 04:18
See my post above

You talked about a height of more than 120 m.
So the problem is height?

Serg SSA Posted at 6-25 10:20
You talked about a height of more than 120 m.
So the problem is height?

Problem 120m is djiuser_exft5qzYsY2q problem.
For a month now I have been writing about the Hyperlaps problem for mini4pro after updating the firmware of a drone older than 01.00.0300!!!
I do not fly above 120 m. The Hyperlapsy functionality does not work at altitudes up to 120 m either!!!
When will we see a drone software update without the hyperlapsy error!!!

I tested two identical drones. same software, same rc controller 2. the only difference was that one was unlocked at 500 meters height. the other was not.
and that's why I say fix hyperlapse because it hasn't been working since April.

Piotr Pe Posted at 6-25 04:15
I fly DJI Mini4pro in the following configuration:
Mini4pro+RC N2+iPhone8+,
Mini4pro+RC N2+iPad9gen,

I also can't make hyperlapse in my mini 4 pro with RC2 from several months (with screen). My drone is classified to C1 and updated to all newest firmware (drone firmware and also RC2 firmware).
The screen when applied hyperlapse becomes grey and restarts to photo mode with no making hyperlaps or even photos to hyperlaps. The red circle which is to start making hyperlaps is going around once before screen becoms grey.
It is all the same in every settings od parametrs of hyperlapse functon.