Please select Into the mobile phone version | Continue to access the computer ver.
help updating big problem
717 3 2015-9-5
Uploading and Loding Picture ...(0/1)
o(^-^)o
fgavazzeni
lvl.2

Italy
Offline

Hi, i've just bought a new inspire 1 and make my first flight out of the box...
i'm little experienced, i own 2 phantom 3 pro and used them a lot.
as soon as made the requested hardware update following the instruction like i did many other time with the phantom i had a problem.
after 40 minutes i found the camera in wrong position and the inspire emitting one loud bep at time, no light, no other sign of life.
now i cannot connet the controller with it, i cannot upgrade or downgrade because as soon as i turn it on the loud beep start immediately and the camera start to roll until end of his travel and still try to rotate....
this is the result of the txt

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin

========== 2014.01.01 00:00:04 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin

========== 2014.01.01 00:00:04 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin

========== 2014.01.01 00:00:04 remo-con disconnect======
Packet: WM610_FW_V01.02.01.06.bin

========== 2014.01.01 00:00:50 remo-con disconnect======
Packet: WM610_FW_V01.02.01.06.bin

========== 2014.01.01 00:00:24 remo-con disconnect======
Packet: WM610_FW_V01.02.01.06.bin

========== 2014.01.01 00:00:04 remo-con disconnect======
Packet: WM610_FW_V01.02.01.06.bin

========== 2014.01.01 00:01:30 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin

========== 2014.01.01 00:00:05 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin


please anyone know wht to do now ?

2015-9-5
Use props
fgavazzeni
lvl.2

Italy
Offline

Update: also without the gimbal attached the i1 emit that loud beep every second or less as soon as i turn it on. and still not pair with the remote.
2015-9-5
Use props
GB44
Captain
Flight distance : 343848 ft
United Kingdom
Offline

fgavazzeni@me.c Posted at 2015-9-5 20:14
Update: also without the gimbal attached the i1 emit that loud beep every second or less as soon as  ...

Did you get this resolved.  If yes what did you do
2015-12-12
Use props
fgavazzeni
lvl.2

Italy
Offline

GB44 Posted at 2015-12-12 18:04
Did you get this resolved.  If yes what did you do

Yes, problem solved.
some patience, a firmware downgrade (at that time the 1.3.sometingh ) that this time work. and after a new upgrade that also work.
2015-12-22
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules