Please select Into the mobile phone version | Continue to access the computer ver.
Feedback on v1.4.10 / Intelligent Flight Controls?
Uploading and Loding Picture ...(0/1)
o(^-^)o
suhailimtiaz
lvl.2

United States
Offline

Has anyone tried installing the new firmware and using the intelligent flight controls (waypoints/follow me/ POI) on their Phantom 3 Pro/Advanced yet?  If so, please share your thoughts/feedback.  
2015-9-7
Use props
geoexplor.gmail
lvl.2
Mexico
Offline

I install in the pahntom, but can´t install V01.04.0010 in the RC.
2015-9-7
Use props
sploodge
Captain
Flight distance : 809350 ft
  • >>>
United Kingdom
Offline

geoexplor.gmail Posted at 2015-9-7 16:16
I install in the pahntom, but can´t install V01.04.0010 in the RC.

No update for the RC if you have done the Phantom then you are ready to fly
As for the original question/ost. The new features work very well..
2015-9-7
Use props
sdavis1974
lvl.2
Flight distance : 219170 ft
United States
Offline

Installed this morning, flew with two batteries, everything worked well, and you do not need to update the controller if you already have the newest version. Only thing is orbit mode, make sure you are directly over whatever it is you want to orbit, other then that all works well!!
.
2015-9-7
Use props
PerlanSwed
First Officer
Flight distance : 857969 ft
Sweden
Offline

The waypoint function is flawless, at least for me that like to video and photo objects. First i do a route and can fine tune the positions of waypoints. Then I run the waypoint mission and able to have full focus on what to film or shoot photo on. I really like the waypoint function.
2015-9-7
Use props
kjartan.kjartan
lvl.1

Norway
Offline


I can't seem to find the new controls? I have updated the app and the new firmware. So where do i access these new features?
2015-9-7
Use props
alirz1
Second Officer
Flight distance : 609833 ft
Canada
Offline

Really sucks that for waypoints you need to fly the route manually first.. I've seen videos for older Phantom model where you could define waypoints offline and then have the Phantom fly the course automatically.
Is this something you can introduce later on?

2015-9-7
Use props
joel.tvp
Second Officer
Flight distance : 930843 ft
  • >>>
Switzerland
Offline

I also updated the app and the firmware and can't find the new controls ???
2015-9-7
Use props
Chrtn
lvl.1

Norway
Offline

joel.tvp Posted at 2015-9-7 17:43
I also updated the app and the firmware and can't find the new controls ???

I found it, you have to take off first and then set the switch on the remote to F, then you will get the new settings
2015-9-7
Use props
sploodge
Captain
Flight distance : 809350 ft
  • >>>
United Kingdom
Offline

joel.tvp Posted at 2015-9-7 16:43
I also updated the app and the firmware and can't find the new controls ???

Read my little guide


View the new Ground Station features overview here - http://forum.dji.com/thread-29855-1-1.html
2015-9-7
Use props
joel.tvp
Second Officer
Flight distance : 930843 ft
  • >>>
Switzerland
Offline

Yeas in F mod, follow me and POI are amazing !
2015-9-7
Use props
ljwsteenbergen
lvl.4
Flight distance : 959783 ft
Netherlands
Offline

Have not had the time yet to update the firmware and weather is not exactly helpful either. After having read the first comments I was a bit disappointed that you have to pre-fly your route, but Ethan you think of it it is not that bad. I would have normally walked the route first to find out what the obstructions are. So actually ok, although it would be nice to set the flight path off-line. Would a pre-recorded flight plan in the simulator work as well (worth trying as alternative to pre-programming).
Really look forward to the weekend to try and fly!!!!
2015-9-7
Use props
rubenpatella
lvl.1

Italy
Offline

Hello guys,
I installed the firmware, but i do not understand how to use the new features. There is not the 2.7k vido format.. any ideas or advices?
2015-9-7
Use props
sploodge
Captain
Flight distance : 809350 ft
  • >>>
United Kingdom
Offline

rubenpatella Posted at 2015-9-7 18:32
Hello guys,
I installed the firmware, but i do not understand how to use the new features. There is  ...

Have a read here - http://forum.dji.com/thread-29855-1-1.html
2015-9-7
Use props
Skygod14
lvl.2

United Kingdom
Offline

finally an update that is genuinely good and has some great features - my P3P is now worth its money! very happy with the performance and what it offers me now.
2015-9-7
Use props
rubenpatella
lvl.1

Italy
Offline


Oh thank you, very good guide! However, i didn't found infos about the 2,7k format video. Is it just for advanced or also for pro version?
2015-9-7
Use props
sploodge
Captain
Flight distance : 809350 ft
  • >>>
United Kingdom
Offline

rubenpatella Posted at 2015-9-7 18:52
Oh thank you, very good guide! However, i didn't found infos about the 2,7k format video. Is it jus ...

Just advanced/standard version has 2.7k..
2015-9-7
Use props
rubenpatella
lvl.1

Italy
Offline

sploodge Posted at 2015-9-7 20:01
Just advanced/standard version has 2.7k..

ok. Thank you again
2015-9-7
Use props
robtaylor28
lvl.1

United Kingdom
Offline

can you turn the drone/cam sideways while flying in waypoints?


2015-9-8
Use props
robtaylor28
lvl.1

United Kingdom
Offline

sploodge Posted at 2015-9-7 19:01
Just advanced/standard version has 2.7k..

can you turn the drone/cam sideways while flying in waypoints?
2015-9-8
Use props
sploodge
Captain
Flight distance : 809350 ft
  • >>>
United Kingdom
Offline

robtaylor28@gma Posted at 2015-9-8 19:07
can you turn the drone/cam sideways while flying in waypoints?

you can YAW the P3
2015-9-8
Use props
NaplesFlyer
lvl.1

United States
Offline

geoexplor.gmail Posted at 2015-9-7 23:16
I install in the pahntom, but can´t install V01.04.0010 in the RC.

I am having the same exact problem.  I updated to firmware 1.3.20 today that worked fine.  The I update to 1.4 on the Drone and that worked fine.  But no matter what I try on the RC. Nothing will work!
2015-9-8
Use props
suhailimtiaz
lvl.2

United States
Offline

sploodge and NaplesFlyer:  Some others on this thread indicated that the firmware update is only for the Phantom and not the RC.  As NaplesFlyer indicated right above, 1.3.20 is all you need on the RC for it to work.  
2015-9-8
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules