oh man, tis is going to give a lot off angry people....
did the upgrade to poi version.. and waypoint....
you really have to fly you're waypoint route to record the waypoints!!!
then after that you have saved the floret your did just do in real!! not simulated, then when you are ready you can let the machine fly the waypoints!!! pfff you battery wil be 50% empty before really fly your waypoint route!!!
the poi is ok the only thing you can do when it's fling it's waypoint is to just the up down, notting else!
for the rest, the machine fly better, at least it feels it fly better, it keeps it's hight level a lot better.
i talk about Inspire!
ok have fun to find out everyting.
to get the functions, switch your switch to F and then everything comes up...
fly safe, first time fly, take a open field to test, have fun fly safe...
sorry for my english

I'm not angry personally,I just see absolutely no use to any of these features for myself. I need to get every second I can out of my batteries per flight. Using this stuff is just a waste of precious time. I can fly and film a route 3 times with various flight adjustments in the time it takes to set up these functions. controlling the camera seems to be the only benefit... personally I would rather see a firmware update that would allow me to adjust pan on one control wheel and tilt on the other. I have no problem flying and controlling the camera manually other than being restricted to either pan or tilt.

Marktho1 Posted at 2015-9-8 00:30
I'm not angry personally,I just see absolutely no use to any of these features for myself. I need to ...

I fully agree with you, we only need two dials, one for pan, one for tilt

i agree to.
I  know flying some very difficult stuff even you can not do it!, i am 100% sure.
Then you need a second controller and cameraman, and that is exactly what i do not wan't do do!, it safes me money!Only flying from A to B everyone can do that, also make nice turns and so on...
It's great that you only think for your selfe, not al people fly like angels...

Anyone know how to use POI on the Inspire 1??  

presti@optonlin Posted at 2015-9-7 12:12
Anyone know how to use POI on the Inspire 1??

1. Change your flying mode switch to F-GPS
2. Another icon will appear on top bar of controller.
3. Press the new icon to get to the flying options.
4. Hover the inspire
5. select POI
6. Follow onscreen instructions.

Marktho1 Posted at 2015-9-8 01:19
1. Change your flying mode switch to F-GPS
2. Another icon will appear on top bar of controller.
3 ...

Thanks you so much Marktho1.