Hi,
Just upgraded the new 9-7-15 firmware and software release for thePhantom 3 Advanced.
Where can i find the three new modes in the DJI GO app.?
1. Point of Interest
2. Follow Me
3. Waypoint
Thanks,
William Burrows

Let me know as well sounds like were in the same boat. The cam upgraded to 2.7k I see just no GS buttons? I can not turn on IOC either.

On the top of your control the switches on too it's on p right put it too the far left on F and options should pop up hope this help

fvillanueva@san Posted at 2015-9-7 12:04
On the top of your control the switches on too it's on p right put it too the far left on F and opti ...

Meant to say on the top

I've tried this as well no luck not sure whats up.

Ezmoney83 Posted at 2015-9-7 11:57
Let me know as well sounds like were in the same boat. The cam upgraded to 2.7k I see just no GS but ...

Top switch where it is set on P switch it to F and its gonna pop up more choices including the follow me and other good stuff

Ezmoney83 Posted at 2015-9-7 12:06
I've tried this as well no luck not sure whats up.

You have to take off first then switch it too F that's when it should be working let me know it works

Oh that might explain it. I have not taken off just messed with it inside after update Im going out back now lol Ill let ya know as soon as Im done. Thanks

Any luck as I have the exact same problem.

Hi,
All the updates will appear once you select A position on the controller.
Every thing (A OK)
Thanks,
William Burrows

Ok problem solved you have to actually take off and then initiate F mode. Not from inside like I did.  FPV still isnt the best still lags but I believe that will be fixed.

once you are in the air switch the controller to F mode   and the commands should come up for you!
from what I am reading fallow me is a little sketchy yet so play around in open area, also inorder to say way points you must fly the path first to say your way points kinda silly you would think you could set from google maps  here is a great over view I found on the forum
http://forum.dji.com/thread-29855-1-1.html

Happy and safe flying

g.kozma Posted at 2015-9-7 18:16
once you are in the air switch the controller to F mode   and the commands should come up for you!
f ...

Thanks good forum.

You need to be in GPS FLY MODE. IF THE CRAFT DOESNT SEE ANY SATELITE, YOU WONT SEE THE NEW FUCNTIONS