Quick transfer nie działa
719 3 1-4 07:09
Uploading and Loding Picture ...(0/1)
o(^-^)o
Wojo143
lvl.1

Poland
Offline

Dzień dobry, chciałbym prosić o pomoc związaną z brakiem możliwości połączenia drona DJI MINI 3 pro z telefonem Iphone 14. Dorna mam aktywnego od 18 dni i wcześniej mogłem bez problemu połączyć drona z telefonem. Prawdopodobnie po dokonaniu aktualizacji straciłem taką możliwość. Teraz za każdym razem jak próbuje połączyć drona z telefonem wyskakuje mi komunikat "Dron może być połączony do innego urządzenia mobilnego. Uruchom ponownie i ponów próbę. Dron nie był łączony z żadnym innym urządzeniem oprócz mojego telefonu. Próbowałem już na różne sposoby ale efekt ten sam. Czym to jest spowodowane i jak rozwiązać ten problem. Bardzo proszę o pomoc.


1-4 07:09
Use props
DJI Gamora
Administrator

Offline

Hi, there. We're sorry for the inconvenience that it may cause you. Sorry for writing this in English. For the QuickTransfer problem, please refer to the recommendations below:

1. Power on the aircraft and wait until the self-diagnostic tests of the aircraft are complete.
2. Make sure Bluetooth and Wi-Fi are enabled on the mobile device. Launch DJI Fly and a prompt will appear to connect to the aircraft.
3. Tap Connect. Once successfully connected, the files on the aircraft can be accessed and downloaded at high speed. When connecting the mobile device to the aircraft for the first time, press and hold the power button of the aircraft for two seconds to confirm.

If the problem persists, please follow the suggestions below:

1. Ensure that the mobile phone’s Wi-Fi and Bluetooth are turned on. Ensure that the mobile/cellular data is disabled.
2. Restart the mobile phone and aircraft.
3. Try to rename the aircraft's Wifi name under "About" and restart it.
4. Please try to start the motor with a remote controller as usual first, then try the quick transfer again.

Kindly keep us posted on the latest progress.
1-5 00:27
Use props
djiuser_avJYdqASXJqL
New

Netherlands
Offline

U mnie dron się łączy z aplikacją ale trzeba nacisnąć guzik na akumulatorze przez 2 sekundy ale dron się nie łączy co zrobić w takim przypadku ?
2-28 09:14
Use props
DJI Paladin
Administrator
Flight distance : 318 ft

Offline

djiuser_avJYdqASXJqL Posted at 2-28 09:14
U mnie dron się łączy z aplikacją ale trzeba nacisnąć guzik na akumulatorze przez 2 sekundy ale dron się nie łączy co zrobić w takim przypadku ?

Hi there. Thank you for reaching out and we do apologize if you're having issues with your unit. Can you confirm what DJI product are you using? Also, please record a short video showing the issue so we can check it further. You may upload the video via Google Drive or YouTube. Please keep us posted.
2-29 02:39
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules