Hello there. Sorry about the trouble. Have you already tried removing the SD card from the aircraft and retry linking? You can also try linking the unit manually using the combination buttons:
Remote controller: Press and hold the Power button on the remote controller for four seconds to prepare to link. Aircraft: Press and hold the Power button on the aircraft for four seconds to prepare to link. If the issue persists, please check whether there is a prompt to update the firmware. If yes, update the firmware to the latest version and try linking again. If you already tried connecting the drone to the DJI Assistant 2 and it cannot be recognized by the software, please try replacing the cable or try using a different port. Please keep us posted. Have a nice day. |