Remote ID in Europe

mbuonanno

Hi,
we have a Matrice 300 RTK (PILOT 2 v9.0.5.5, Aircraft v09.00.0503, RC v09.00.0501) and we operate in Europe in OPEN and SPECIFIC category operational scenarios.
Is it possible to brodcast the Remote ID for a Matrice 300 RTK following the european EASA Remote ID standard? How to enter the ID into DJI Pilot 2 ?
Maurizio

AR_AirPrecision

In the current state it's not possible...there was a release in december but it removes RiD FAA from the menu. See the other threads :-)

DJI Susan

Hi Maurizio, thank you for your inquiry. M300 RTK does not support RID, and users cannot apply for the Cx certification for the drone.
However, you can fly it in the A3 environment. Thank you for your attention.

AR_AirPrecision

DJI Susan Posted at 1-17 22:34
Hi Maurizio, thank you for your inquiry. M300 RTK does not support RID, and users cannot apply for the Cx certification for the drone.
However, you can fly it in the A3 environment. Thank you for your attention.

Could it be possible to have Rid even if there isn't Cx? Under Specific ( PDRA or SORA ) Rid is required but Cx is not.
Currently DJI forces us to have an eternal Rid...

Jacektfc

Is it possible to brodcast the Remote ID for a Mavic 2 pro following the european EASA Remote ID standard?

DJI Susan

AR_AirPrecision Posted at 1-18 00:06
Could it be possible to have Rid even if there isn't Cx? Under Specific ( PDRA or SORA ) Rid is required but Cx is not.
Currently DJI forces us to have an eternal Rid...

Sorry, there is no plan for the firmware update to support RID. An external RID is recommended indeed. Sorry for this.

DJI Susan

Jacektfc Posted at 1-18 03:32
Is it possible to brodcast the Remote ID for a Mavic 2 pro following the european EASA Remote ID standard?

Hi there, sorry that EU RID is not supported for Mavic 2 Pro. Thank you for your attention,

drone_seals

Hi Susan - Can you explain how to fly in SPECIFIC category in EU with DJI Matrice 300 RTK? What is needed for that?
I don't understand why such an expensive drone would suddenly become obsolete and useless outside open category...

Is it possible to buy third party components that would make the drone compliant?