Recently purchased the RS3 Pro bundle, the first three times I used the gimbal it would automatically fold the arms when powering off. Now it just locks all the arms in the open position and I have to manually unlock each arm to fold. Am I missing a setting somewhere?

Hello, there. Thank you for reaching out. You can change the setting to your preferred behavior by going to System setting and choosing "Auto lock" From this section, you may select between Lock, Fold&Lock, and None when powering the gimbal on or off. You may refer to the screenshot below. I hope this information helps. Thank you for your support.

DJI Gamora Posted at 1-31 23:39
Hello, there. Thank you for reaching out. You can change the setting to your preferred behavior by going to System setting and choosing "Auto lock" From this section, you may select between Lock, Fold&Lock, and None when powering the gimbal on or off. You may refer to the screenshot below. I hope this information helps. Thank you for your support.

[view_image]

Awesome thanks for your assistance!

djiuser_cMMm4Kp4lLiK Posted at 1-31 23:58
Awesome thanks for your assistance!

You're most welcome. Please feel free to reach us anytime! Cheers!