Please select Into the mobile phone version | Continue to access the computer ver.
Battery problem with new Firmware 1.4.0.10
677 2 2015-9-9
Uploading and Loding Picture ...(0/1)
o(^-^)o
Jorgehlopezc
lvl.4
Flight distance : 4957293 ft
Colombia
Offline

I Have been flying without issues all day with new firmware. After this, at night when I charged one battery (Tb48 and has 28 battery charges) and the charging process finished well. When I put it again in my aircraft to flight, The Go app showed 0%, rear indicator led stayed red all time,  the aircraft obviusly don´t fly, and the next messages appear in the app, even when the battery was fully charged:  (Note: The status of the battery is perfect. (When leaving pressing the buttom)

Please DJI Could you explain this and say me what to do? Thanks.

Overall status

Overall status

Battery charged

Battery charged

Message turning on

Message turning on
2015-9-9
Use props
loukas66
lvl.1

Australia
Offline

After new firmware update I had tb48 battery problem.
I was flying inspire when  suddenly battery level drop from 59% to 2%  fortunately I hovering 5 feet when it happen.
2015-9-12
Use props
tpallai
Second Officer

United States
Offline

I had the same issue. I had gotten the notice to fly the inspire to less an 5% to preserve battery life and when i got down to 7% it then jumped down to 0%. A little scary even when hovering.
2015-9-12
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules