Please select Into the mobile phone version | Continue to access the computer ver.
Gimbal issue help please
1355 12 2015-9-11
Uploading and Loding Picture ...(0/1)
o(^-^)o
mikaproductions
lvl.4
Flight distance : 67392 ft
France
Offline

Hi all

I have a gimbal issue on my phantom 3 pro, it's happen after almost 10 minutes of flying time... I have this problem since the 1.26 firmware...any clue ? ??

I reinstall all the firmware from the 1.19 and still the same

please help

thanks

Mike ;-)





[00014240][01 00] Firmware upgrade finished successfully.
[00014550]Done.

[00014685]Packet [C:\P3X_FW_V01.02.0006.bin] resumed, card sn [0x1c165816].
[00014728]Version checking[2]...
[00014785][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00014841][03 06][00] v2.1.6.18 -> v2.2.6.8 need upgrade.
[00014884][04 00][00] v1.36.0.0 -> v1.38.0.0 need upgrade.
[00014929][09 00][00] v1.7.0.3 -> v1.7.0.3
[00015026][11 00][00] v1.6.0.0 -> v1.6.0.0
[00015090][12 00][00] v1.8.0.0 -> v1.8.0.0
[00015179][12 01][00] v1.8.0.0 -> v1.8.0.0
[00015255][12 02][00] v1.8.0.0 -> v1.8.0.0
[00015335][12 03][00] v1.8.0.0 -> v1.8.0.0
[00015455][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015530][17 00][00] v1.1.1.2 -> v1.1.1.6 need upgrade.
[00015651][17 01][00] v1.0.2.4 -> v1.0.2.5 need upgrade.
[00015709][19 00][00] v1.0.8.59 -> v1.0.8.96 need upgrade.
[00015745][01 00][05] v1.15.3056 -> v1.15.3056
[00015779][01 01][00] v1.5.2735 -> v1.15.3056 need upgrade
[00015821][08 00][00] v0.11.0.4 -> v0.11.0.4
[00015856]Done.

[00015891]Firmware upgrading[2]...
[00016039][01 01] Firmware upgrade start...
[00046291][01 01] Firmware upgrade finished successfully.
[00046354][17 00] Firmware upgrade start...
[00141511][17 00] Firmware upgrade finished successfully.
[00141557][17 01] Firmware upgrade start...
[00204697][17 01] Firmware upgrade finished successfully.
[00204751][03 05] Firmware upgrade start...
[00272464][03 05] Firmware upgrade finished successfully.
[00272687][03 06] Firmware upgrade start...
[00573212][03 06] Firmware upgrade finished successfully.
[00576290][19 00] Firmware upgrade start...
[00741640][19 00] Firmware upgrade finished successfully.
[00741699][04 00] Firmware upgrade start...
[00798281][04 00] Firmware upgrade finished successfully.
[00798319]Done.

[00798352]Version checking[3]...
[00798428][03 05][05] v34.2.0.9 -> v34.2.0.9
[00798508][03 06][05] v2.2.6.8 -> v2.2.6.8
[00798547][04 00][05] v1.38.0.0 -> v1.38.0.0
[00798588][09 00][00] v1.7.0.3 -> v1.7.0.3
[00798784][11 00][00] v1.6.0.0 -> v1.6.0.0
[00798878][12 00][00] v1.8.0.0 -> v1.8.0.0
[00798953][12 01][00] v1.8.0.0 -> v1.8.0.0
[00799044][12 02][00] v1.8.0.0 -> v1.8.0.0
[00799118][12 03][00] v1.8.0.0 -> v1.8.0.0
[00799236][15 00][00] v1.1.2.0 -> v1.1.2.0
[00799318][17 00][05] v1.1.1.6 -> v1.1.1.6
[00799433][17 01][05] v1.0.2.5 -> v1.0.2.5
[00799488][19 00][05] v1.0.8.96 -> v1.0.8.96
[00799524][01 00][05] v1.15.3056 -> v1.15.3056
[00799558][01 01][05] v1.15.3056 -> v1.15.3056
[00799610][08 00][00] v0.11.0.4 -> v0.11.0.4
[00799646]Packet upgrade finish successfully.



[00013133]========== remo-con disconnect. boot(15) ============
[00013171]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x1c165816].
[00013205]Packet upgrade start...

[00013246]Packet checking...
[00013282]Done.

[00013317]Version checking[1]...
[00013384][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013449][03 06][00] v2.2.6.8 -> v2.2.6.8
[00013492][04 00][00] v1.38.0.0 -> v1.38.0.0
[00013554][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013664][11 00][00] v1.6.0.0 -> v1.6.0.0
[00013739][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013813][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013903][12 02][00] v1.8.0.0 -> v1.8.0.0
[00014003][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014139][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014209][17 00][00] v1.1.1.6 -> v1.1.1.6
[00014335][17 01][00] v1.0.2.5 -> v1.0.2.5
[00014393][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014430][01 00][00] v1.15.3056 -> v1.15.3056
[00014465][01 01][00] v1.15.3056 -> v1.15.3056
[00014520][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014557]Packet upgrade cancelled at version checking.



[00012877]========== remo-con disconnect. boot(15) ============
[00012915]Firmware [C:\MVOM0Fw.bin] detected, card sn [0x80ce0f01].
[00012950][17 01] Firmware upgrade start...
[00067581][17 01] Firmware upgrade finished successfully.
[00067622]Done.

[00013426]========== remo-con disconnect. boot(15) ============
[00013534]Packet [C:\P3X_FW_V01.01.0009.bin] detected, card sn [0x80ce0f01].
[00013674]Packet upgrade start...

[00013717]Packet checking...
[00013752]Done.

[00013786]Version checking[1]...
[00013877][03 05][00] v34.2.0.9 -> v34.2.0.8
[00013952][03 06][00] v2.2.6.8 -> v2.1.6.18
[00014000][04 00][00] v1.38.0.0 -> v1.36.0.0
[00014047][09 00][00] v1.7.0.3 -> v1.7.0.3
[00014171][11 00][00] v1.6.0.0 -> v1.6.0.0
[00014272][12 00][00] v1.8.0.0 -> v1.8.0.0
[00014371][12 01][00] v1.8.0.0 -> v1.8.0.0
[00014456][12 02][00] v1.8.0.0 -> v1.8.0.0
[00014547][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014677][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014758][17 00][00] v1.1.1.6 -> v1.1.1.2
[00015421][17 01][00] v0.0.0.0 -> v1.0.2.4 need upgrade.
[00015487][19 00][00] v1.0.8.96 -> v1.0.8.59
[00015525][01 00][00] v1.15.3056 -> v1.6.2736
[00015563][01 01][00] v1.15.3056 -> v1.5.2735
[00015608][08 00][00] v0.11.0.4 -> v0.11.0.4
[00015651]Done.

[00017688]Waiting for user confirm...
[00027726]Timeout, start upgrade automatically.

[00027802]Firmware upgrading[1]...
[00027856][17 01] Firmware upgrade start...
[00091220][17 01] Firmware upgrade finished successfully.
[00091257]Done.

[00091294]Version checking[2]...
[00091395][03 05][00] v34.2.0.9 -> v34.2.0.8
[00091475][03 06][00] v2.2.6.8 -> v2.1.6.18
[00091514][04 00][00] v1.38.0.0 -> v1.36.0.0
[00091572][09 00][00] v1.7.0.3 -> v1.7.0.3
[00091696][11 00][00] v1.6.0.0 -> v1.6.0.0
[00091796][12 00][00] v1.8.0.0 -> v1.8.0.0
[00091881][12 01][00] v1.8.0.0 -> v1.8.0.0
[00091982][12 02][00] v1.8.0.0 -> v1.8.0.0
[00092072][12 03][00] v1.8.0.0 -> v1.8.0.0
[00092198][15 00][00] v1.1.2.0 -> v1.1.2.0
[00092281][17 00][00] v1.1.1.6 -> v1.1.1.2
[00092441][17 01][05] v1.0.2.4 -> v1.0.2.4
[00092491][19 00][00] v1.0.8.96 -> v1.0.8.59
[00092530][01 00][00] v1.15.3056 -> v1.6.2736
[00092565][01 01][00] v1.15.3056 -> v1.5.2735
[00092621][08 00][00] v0.11.0.4 -> v0.11.0.4
[00092662]Packet upgrade finish successfully.



[00013641]========== remo-con disconnect. boot(15) ============
[00013757]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1c165816].
[00013796]Packet upgrade start...

[00013839]Packet checking...
[00013877]Done.

[00013926]Version checking[1]...
[00014001][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014077][03 06][00] v2.2.6.8 -> v2.2.6.19 need upgrade.
[00014127][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00014197][09 00][00] v1.7.0.3 -> v1.7.0.3
[00014318][11 00][00] v1.6.0.0 -> v1.7.0.0 need upgrade.
[00014416][12 00][00] v1.8.0.0 -> v1.8.0.0
[00014516][12 01][00] v1.8.0.0 -> v1.8.0.0
[00014618][12 02][00] v1.8.0.0 -> v1.8.0.0
[00014718][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014869][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014947][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00015092][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00015138][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015178][01 00][00] v1.15.3056 -> v1.23.3419 need upgrade
[00015217][01 01][00] v1.15.3056 -> v1.23.3419 need upgrade
[00015272][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00015308]Done.

[00017348]Waiting for user confirm...
[00027385]Timeout, start upgrade automatically.

[00027459]Firmware upgrading[1]...
[00040271][01 00] Firmware upgrade start...
[00012236][01 00] Firmware upgrade finished successfully.
[00012373]Done.

[00012506]Packet [C:\P3X_FW_V01.03.0020.bin] resumed, card sn [0x1c165816].
[00012654]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012819]Version checking[2]...
[00013014][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013315][03 06][00] v2.2.6.8 -> v2.2.6.19 need upgrade.
[00013419][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00013510][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013674][11 00][00] v1.6.0.0 -> v1.7.0.0 need upgrade.
[00013830][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013939][12 01][00] v1.8.0.0 -> v1.8.0.0
[00014030][12 02][00] v1.8.0.0 -> v1.8.0.0
[00014129][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014258][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014339][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00014559][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00014609][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014646][01 00][05] v1.23.3419 -> v1.23.3419
[00014691][01 01][00] v1.15.3056 -> v1.23.3419 need upgrade
[00014736][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00014774]Done.

[00014812]Firmware upgrading[2]...
[00014950][01 01] Firmware upgrade start...
[00045204][01 01] Firmware upgrade finished successfully.
[00046042][08 00] Firmware upgrade start...
[00532986][08 00] Firmware upgrade finished successfully.
[00533046][17 00] Firmware upgrade start...
[00575584][17 00] Firmware upgrade finish failed (step = 2, err = 0xaa).
[00605631][17 01] Firmware upgrade start...
[00658476][17 01] Firmware upgrade finished successfully.
[00658523][11 00] Firmware upgrade start...
[00707530][11 00] Firmware upgrade finished successfully.
[00707751][03 06] Firmware upgrade start...
[01022477][03 06] Firmware upgrade finished successfully.
[01022547][04 00] Firmware upgrade start...
[01080073][04 00] Firmware upgrade finished successfully.
[01080110]Done.

[01080146]Version checking[3]...
[01080236][03 05][00] v34.2.0.9 -> v34.2.0.9
[01080336][03 06][05] v2.2.6.19 -> v2.2.6.19
[01080380][04 00][05] v1.40.0.0 -> v1.40.0.0
[01080431][09 00][00] v1.7.0.3 -> v1.7.0.3
[01080536][11 00][05] v1.7.0.0 -> v1.7.0.0
[01080636][12 00][00] v1.8.0.0 -> v1.8.0.0
[01080736][12 01][00] v1.8.0.0 -> v1.8.0.0
[01080826][12 02][00] v1.8.0.0 -> v1.8.0.0
[01080926][12 03][00] v1.8.0.0 -> v1.8.0.0
[01081061][15 00][00] v1.1.2.0 -> v1.1.2.0
[01081146][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[01081266][17 01][05] v1.0.2.7 -> v1.0.2.7
[01081331][19 00][00] v1.0.8.96 -> v1.0.8.96
[01081370][01 00][05] v1.23.3419 -> v1.23.3419
[01081406][01 01][05] v1.23.3419 -> v1.23.3419
[01081464][08 00][05] v0.12.0.4 -> v0.12.0.4
[01081503]Done.

[01081546]Firmware upgrading[3]...
[01081610][17 00] Firmware upgrade start...
[01172546][17 00] Firmware upgrade finished successfully.
[01172664]Done.

[01172703]Version checking[4]...
[01172781][03 05][00] v34.2.0.9 -> v34.2.0.9
[01172885][03 06][05] v2.2.6.19 -> v2.2.6.19
[01172933][04 00][05] v1.40.0.0 -> v1.40.0.0
[01172996][09 00][00] v1.7.0.3 -> v1.7.0.3
[01173122][11 00][05] v1.7.0.0 -> v1.7.0.0
[01173206][12 00][00] v1.8.0.0 -> v1.8.0.0
[01173311][12 01][00] v1.8.0.0 -> v1.8.0.0
[01173411][12 02][00] v1.8.0.0 -> v1.8.0.0
[01173502][12 03][00] v1.8.0.0 -> v1.8.0.0
[01173632][15 00][00] v1.1.2.0 -> v1.1.2.0
[01173731][17 00][05] v1.1.1.7 -> v1.1.1.7
[01173851][17 01][05] v1.0.2.7 -> v1.0.2.7
[01173916][19 00][00] v1.0.8.96 -> v1.0.8.96
[01173961][01 00][05] v1.23.3419 -> v1.23.3419
[01174001][01 01][05] v1.23.3419 -> v1.23.3419
[01174059][08 00][05] v0.12.0.4 -> v0.12.0.4
[01174099]Packet upgrade finish successfully.



[00012490]========== remo-con disconnect. boot(15) ============
[00012529]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1c165816].
[00012568]Packet upgrade start...

[00012610]Packet checking...
[00012649]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012688]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012728]Done.

[00012767]Version checking[1]...
[00012841][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012901][03 06][00] v2.2.6.19 -> v2.2.6.19
[00012953][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013010][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013125][11 00][00] v1.6.0.0 -> v1.7.0.0 need upgrade.
[00013215][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013315][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013395][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013470][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013595][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013673][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013798][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013851][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013890][01 00][00] v1.23.3419 -> v1.23.3419
[00013929][01 01][00] v1.23.3419 -> v1.23.3419
[00013985][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014023]Done.

[00016150]Waiting for user confirm...
[00026188]Timeout, start upgrade automatically.

[00026279]Firmware upgrading[1]...
[00026325][11 00] Firmware upgrade start...
[00075578][11 00] Firmware upgrade finished successfully.
[00075618]Done.

[00075658]Version checking[2]...
[00075744][03 05][00] v34.2.0.9 -> v34.2.0.9
[00075828][03 06][00] v2.2.6.19 -> v2.2.6.19
[00075875][04 00][00] v1.40.0.0 -> v1.40.0.0
[00075933][09 00][00] v1.7.0.3 -> v1.7.0.3
[00076048][11 00][05] v1.7.0.0 -> v1.7.0.0
[00076143][12 00][00] v1.8.0.0 -> v1.8.0.0
[00076218][12 01][00] v1.8.0.0 -> v1.8.0.0
[00076364][12 02][00] v1.8.0.0 -> v1.8.0.0
[00076444][12 03][00] v1.8.0.0 -> v1.8.0.0
[00076582][15 00][00] v1.1.2.0 -> v1.1.2.0
[00076656][17 00][00] v1.1.1.7 -> v1.1.1.7
[00076774][17 01][00] v1.0.2.7 -> v1.0.2.7
[00076834][19 00][00] v1.0.8.96 -> v1.0.8.96
[00076874][01 00][00] v1.23.3419 -> v1.23.3419
[00076914][01 01][00] v1.23.3419 -> v1.23.3419
[00076972][08 00][00] v0.12.0.4 -> v0.12.0.4
[00077011]Packet upgrade finish successfully.



[00012854]========== remo-con disconnect. boot(15) ============
[00012892]Packet [C:\P3X_FW_V01.01.0009.bin] detected, card sn [0x80ce0f01].
[00012928]Packet upgrade start...

[00012969]Packet checking...
[00013007]Packet vlink 01.01.0000 <-> 01.01.0000.
[00013050]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 1).
[00013085]Done.

[00013123]Version checking[1]...
[00013210][03 05][00] v34.2.0.9 -> v34.2.0.8
[00013289][03 06][00] v2.2.6.19 -> v2.1.6.18
[00013331][04 00][00] v1.40.0.0 -> v1.36.0.0 need upgrade.
[00013389][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013509][11 00][00] v1.7.0.0 -> v1.6.0.0
[00013604][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013705][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013804][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013904][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014035][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014118][17 00][00] v1.1.1.7 -> v1.1.1.2 need upgrade.
[00014243][17 01][00] v1.0.2.7 -> v1.0.2.4 need upgrade.
[00014369][19 00][00] v1.0.8.96 -> v1.0.8.59
[00014408][01 00][00] v1.23.3419 -> v1.6.2736 need upgrade
[00014445][01 01][00] v1.23.3419 -> v1.5.2735 need upgrade
[00014502][08 00][00] v0.12.0.4 -> v0.11.0.4 need upgrade.
[00014539]Done.

[00016578]Waiting for user confirm...
[00026614]Timeout, start upgrade automatically.

[00026699]Firmware upgrading[1]...
[00026835][01 01] Firmware upgrade start...
[00057066][01 01] Firmware upgrade finished successfully.
[00057821][08 00] Firmware upgrade start...
[00587728][08 00] Firmware upgrade finished successfully.
[00587794][17 00] Firmware upgrade start...
[00696279][17 00] Firmware upgrade finished successfully.
[00696328][17 01] Firmware upgrade start...
[00760463][17 01] Firmware upgrade finished successfully.
[00760525][04 00] Firmware upgrade start...
[00815208][04 00] Firmware upgrade finished successfully.
[00815252]Done.

[00815287]Version checking[2]...
[00815362][03 05][00] v34.2.0.9 -> v34.2.0.8
[00815422][03 06][00] v2.2.6.19 -> v2.1.6.18
[00815465][04 00][05] v1.36.0.0 -> v1.36.0.0
[00815516][09 00][00] v1.7.0.3 -> v1.7.0.3
[00815643][11 00][00] v1.7.0.0 -> v1.6.0.0
[00815719][12 00][00] v1.8.0.0 -> v1.8.0.0
[00815796][12 01][00] v1.8.0.0 -> v1.8.0.0
[00815871][12 02][00] v1.8.0.0 -> v1.8.0.0
[00815951][12 03][00] v1.8.0.0 -> v1.8.0.0
[00816082][15 00][00] v1.1.2.0 -> v1.1.2.0
[00816171][17 00][05] v1.1.1.2 -> v1.1.1.2
[00816296][17 01][05] v1.0.2.4 -> v1.0.2.4
[00816359][19 00][00] v1.0.8.96 -> v1.0.8.59
[00816395][01 00][00] v1.23.3419 -> v1.6.2736 need upgrade
[00816434][01 01][05] v1.5.2735 -> v1.5.2735
[00816479][08 00][05] v0.11.0.4 -> v0.11.0.4
[00816519]Done.

[00816555]Firmware upgrading[2]...
[00828373][01 00] Firmware upgrade start...
[00012224][01 00] Firmware upgrade finished successfully.
[00012266]Done.

[00012304]Packet [C:\P3X_FW_V01.02.0006.bin] resumed, card sn [0x80ce0f01].
[00012345]Version checking[2]...
[00012427][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012587][03 06][00] v2.2.6.19 -> v2.2.6.8
[00012638][04 00][00] v1.36.0.0 -> v1.38.0.0 need upgrade.
[00012685][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012810][11 00][00] v1.7.0.0 -> v1.6.0.0
[00012915][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013005][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013105][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013205][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013350][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013435][17 00][00] v1.1.1.2 -> v1.1.1.6 need upgrade.
[00013554][17 01][00] v1.0.2.4 -> v1.0.2.5 need upgrade.
[00013605][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013645][01 00][05] v1.15.3056 -> v1.15.3056
[00013683][01 01][00] v1.5.2735 -> v1.15.3056 need upgrade
[00013742][08 00][00] v0.11.0.4 -> v0.11.0.4
[00013778]Done.

[00013814]Firmware upgrading[2]...
[00013961][01 01] Firmware upgrade start...
[00044223][01 01] Firmware upgrade finished successfully.
[00044291][17 00] Firmware upgrade start...
[00127796][17 00] Firmware upgrade finished successfully.
[00127851][17 01] Firmware upgrade start...
[00192805][17 01] Firmware upgrade finished successfully.
[00192874][04 00] Firmware upgrade start...
[00250173][04 00] Firmware upgrade finished successfully.
[00250218]Done.

[00250258]Version checking[3]...
[00250347][03 05][00] v34.2.0.9 -> v34.2.0.9
[00250424][03 06][00] v2.2.6.19 -> v2.2.6.8
[00250465][04 00][05] v1.38.0.0 -> v1.38.0.0
[00250519][09 00][00] v1.7.0.3 -> v1.7.0.3
[00250644][11 00][00] v1.7.0.0 -> v1.6.0.0
[00250742][12 00][00] v1.8.0.0 -> v1.8.0.0
[00250841][12 01][00] v1.8.0.0 -> v1.8.0.0
[00250938][12 02][00] v1.8.0.0 -> v1.8.0.0
[00251038][12 03][00] v1.8.0.0 -> v1.8.0.0
[00251177][15 00][00] v1.1.2.0 -> v1.1.2.0
[00251274][17 00][05] v1.1.1.6 -> v1.1.1.6
[00251418][17 01][05] v1.0.2.5 -> v1.0.2.5
[00251478][19 00][00] v1.0.8.96 -> v1.0.8.96
[00251518][01 00][05] v1.15.3056 -> v1.15.3056
[00251555][01 01][05] v1.15.3056 -> v1.15.3056
[00251608][08 00][00] v0.11.0.4 -> v0.11.0.4
[00251650]Packet upgrade finish successfully.



[00012880]========== remo-con disconnect. boot(15) ============
[00012919]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce0f01].
[00012955]Packet upgrade start...

[00013006]Packet checking...
[00013048]Done.

[00013087]Version checking[1]...
[00013163][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013239][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013284][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00013342][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013462][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013559][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013651][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013731][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013831][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013959][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014046][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00014166][17 01][00] v1.0.2.5 -> v1.0.2.7 need upgrade.
[00014222][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014268][01 00][00] v1.15.3056 -> v1.23.3419 need upgrade
[00014307][01 01][00] v1.15.3056 -> v1.23.3419 need upgrade
[00014359][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00014396]Done.

[00016444]Waiting for user confirm...
[00026488]Timeout, start upgrade automatically.

[00026573]Firmware upgrading[1]...
[00038500][01 00] Firmware upgrade start...
[00012224][01 00] Firmware upgrade finished successfully.
[00012265]Done.

[00012303]Packet [C:\P3X_FW_V01.03.0020.bin] resumed, card sn [0x80ce0f01].
[00012353]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012394]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012432]Version checking[2]...
[00012509][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012589][03 06][00] v2.2.6.19 -> v2.2.6.19
[00012641][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00012709][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012829][11 00][00] v1.7.0.0 -> v1.7.0.0
[00012919][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013009][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013094][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013184][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013418][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013514][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00013634][17 01][00] v1.0.2.5 -> v1.0.2.7 need upgrade.
[00013689][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013731][01 00][05] v1.23.3419 -> v1.23.3419
[00013769][01 01][00] v1.15.3056 -> v1.23.3419 need upgrade
[00013823][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00013864]Done.

[00013904]Firmware upgrading[2]...
[00014048][01 01] Firmware upgrade start...
[00044322][01 01] Firmware upgrade finished successfully.
[00045173][08 00] Firmware upgrade start...
[00571579][08 00] Firmware upgrade finished successfully.
[00571643][17 00] Firmware upgrade start...
[00659076][17 00] Firmware upgrade finished successfully.
[00659127][17 01] Firmware upgrade start...
[00723942][17 01] Firmware upgrade finished successfully.
[00724009][04 00] Firmware upgrade start...
[00780062][04 00] Firmware upgrade finished successfully.
[00780103]Done.

[00780143]Version checking[3]...
[00780240][03 05][00] v34.2.0.9 -> v34.2.0.9
[00780320][03 06][00] v2.2.6.19 -> v2.2.6.19
[00780371][04 00][05] v1.40.0.0 -> v1.40.0.0
[00780434][09 00][00] v1.7.0.3 -> v1.7.0.3
[00780559][11 00][00] v1.7.0.0 -> v1.7.0.0
[00780629][12 00][00] v1.8.0.0 -> v1.8.0.0
[00780724][12 01][00] v1.8.0.0 -> v1.8.0.0
[00780823][12 02][00] v1.8.0.0 -> v1.8.0.0
[00780909][12 03][00] v1.8.0.0 -> v1.8.0.0
[00781052][15 00][00] v1.1.2.0 -> v1.1.2.0
[00781149][17 00][05] v1.1.1.7 -> v1.1.1.7
[00781269][17 01][05] v1.0.2.7 -> v1.0.2.7
[00781334][19 00][00] v1.0.8.96 -> v1.0.8.96
[00781374][01 00][05] v1.23.3419 -> v1.23.3419
[00781415][01 01][05] v1.23.3419 -> v1.23.3419
[00781481][08 00][05] v0.12.0.4 -> v0.12.0.4
[00781522]Packet upgrade finish successfully.



[00012530]========== remo-con disconnect. boot(15) ============
[00012569]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce0f01].
[00012606]Packet upgrade start...

[00012654]Packet checking...
[00012696]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012812]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012854]Done.

[00012895]Version checking[1]...
[00012957][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013017][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013064][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013127][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013238][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013327][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013402][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013502][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013595][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013731][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013806][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013943][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014006][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014047][01 00][00] v1.23.3419 -> v1.23.3419
[00014091][01 01][00] v1.23.3419 -> v1.23.3419
[00014143][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014183]Packet upgrade cancelled at version checking.



[00013728]========== remo-con disconnect. boot(15) ============
[00013770]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x80ce0f01].
[00013811]Packet upgrade start...

[00013854]Packet checking...
[00013899]Packet vlink 01.04.0010 <-> 01.03.0020.
[00013944]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00013985]Done.

[00014026]Version checking[1]...
[00014098][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014178][03 06][00] v2.2.6.19 -> v2.3.0.13 need upgrade.
[00014225][04 00][00] v1.40.0.0 -> v1.41.0.0 need upgrade.
[00014283][09 00][00] v1.7.0.3 -> v1.7.0.3
[00014399][11 00][00] v1.7.0.0 -> v1.7.0.0
[00014508][12 00][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00014598][12 01][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00014698][12 02][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00014798][12 03][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00014948][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015028][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015148][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015203][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015247][01 00][00] v1.23.3419 -> v1.23.3419
[00015382][01 01][00] v1.23.3419 -> v1.23.3419
[00015466][08 00][00] v0.12.0.4 -> v0.12.0.4
[00015509]Done.

[00017549]Waiting for user confirm...
[00027589]Timeout, start upgrade automatically.

[00027677]Firmware upgrading[1]...
[00027738][12 00] Firmware upgrade start...
[00147301][12 00] Firmware upgrade finished successfully.
[00147364][12 01] Firmware upgrade start...
[00253448][12 01] Firmware upgrade finished successfully.
[00253511][12 02] Firmware upgrade start...
[00365578][12 02] Firmware upgrade finished successfully.
[00365638][12 03] Firmware upgrade start...
[00468639][12 03] Firmware upgrade finished successfully.
[00468874][03 06] Firmware upgrade start...
[00800163][03 06] Firmware upgrade finished successfully.
[00800236][04 00] Firmware upgrade start...
[00858427][04 00] Firmware upgrade finished successfully.
[00858470]Done.

[00858509]Version checking[2]...
[00858588][03 05][00] v34.2.0.9 -> v34.2.0.9
[00858669][03 06][05] v2.3.0.13 -> v2.3.0.13
[00858715][04 00][05] v1.41.0.0 -> v1.41.0.0
[00858777][09 00][00] v1.7.0.3 -> v1.7.0.3
[00858889][11 00][00] v1.7.0.0 -> v1.7.0.0
[00858977][12 00][05] v1.10.0.0 -> v1.10.0.0
[00859062][12 01][05] v1.10.0.0 -> v1.10.0.0
[00859162][12 02][05] v1.10.0.0 -> v1.10.0.0
[00859262][12 03][05] v1.10.0.0 -> v1.10.0.0
[00859411][15 00][00] v1.1.2.0 -> v1.1.2.0
[00859518][17 00][00] v1.1.1.7 -> v1.1.1.7
[00859639][17 01][00] v1.0.2.7 -> v1.0.2.7
[00859692][19 00][00] v1.0.8.96 -> v1.0.8.96
[00859733][01 00][00] v1.23.3419 -> v1.23.3419
[00859773][01 01][00] v1.23.3419 -> v1.23.3419
[00859818][08 00][00] v0.12.0.4 -> v0.12.0.4
[00859863]Packet upgrade finish successfully.



[00013743]========== remo-con disconnect. boot(15) ============
[00013785]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x80ce0f01].
[00013828]Packet upgrade start...

[00013874]Packet checking...
[00013917]Packet vlink 01.04.0010 <-> 01.03.0020.
[00013961]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014072]Done.

[00014112]Version checking[1]...
[00014192][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014272][03 06][00] v2.3.0.13 -> v2.3.0.13
[00014319][04 00][00] v1.41.0.0 -> v1.41.0.0
[00014376][09 00][00] v1.7.0.3 -> v1.7.0.3
[00014492][11 00][00] v1.7.0.0 -> v1.7.0.0
[00014581][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014681][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014772][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014872][12 03][00] v1.10.0.0 -> v1.10.0.0
[00015017][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015121][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015238][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015296][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015338][01 00][00] v1.23.3419 -> v1.23.3419
[00015381][01 01][00] v1.23.3419 -> v1.23.3419
[00015443][08 00][00] v0.12.0.4 -> v0.12.0.4
[00015486]Packet upgrade cancelled at version checking.




2015-9-11
Use props
Emmet Ward
lvl.3
Flight distance : 309062 ft
United States
Offline

Hi there,
It would appear that your phantom is in FPV mode. This means that when you move the drone left and right the camera doesn't balance out. You can change this in this setting by switching it from FPV to Follow mode.
2015-9-11
Use props
rayrokni
Captain
Flight distance : 8139875 ft
United States
Offline

Emmet Ward Posted at 2015-9-11 18:53
Hi there,
It would appear that your phantom is in FPV mode. This means that when you move the drone  ...

no this doesnt look like fpv or follow mode, u can actually see the jeks in the gimbal even when kind of hovering, i am sure u have done all calibrations so at this point i would have to say get in touch with Tech support!!
2015-9-11
Use props
Emmet Ward
lvl.3
Flight distance : 309062 ft
United States
Offline

rayrokni Posted at 2015-9-11 18:55
no this doesnt look like fpv or follow mode, u can actually see the jeks in the gimbal even when k ...

Good point, you can get in touch with DJI here.
2015-9-11
Use props
mikaproductions
lvl.4
Flight distance : 67392 ft
France
Offline

Tanks to reply  I am in follow mode and I did all IMU and camera calibration
2015-9-11
Use props
russ
New

United States
Offline

Mine started doing that yesterday as well. It was flying fine all day long, and then all of sudden, it started do the same thing. I fly left and right and it won't stay locked in the horizontal position. Front and back are fine. It just seems to happen flying left and right (with the camera forward).

2015-9-12
Use props
pulsar747n
lvl.1

United States
Offline

russ Posted at 2015-9-12 09:26
Mine started doing that yesterday as well. It was flying fine all day long, and then all of sudden,  ...

Your does seem that it is in the FPV Position.  Check your settings and select "Follow"
2015-9-12
Use props
pulsar747n
lvl.1

United States
Offline

I would find a good video on doing an IMU, Gimbal and Compass calibration and perform those.
2015-9-12
Use props
hundleton1
Captain
Flight distance : 2741657 ft
  • >>>
United Kingdom
Offline

russ Posted at 2015-9-12 16:26
Mine started doing that yesterday as well. It was flying fine all day long, and then all of sudden,  ...

You are in FPV mode change it in the gimbal settings

The OP you have a faulty gimbal you need to send it into DJI its dropping in Yaw.
2015-9-12
Use props
mikaproductions
lvl.4
Flight distance : 67392 ft
France
Offline

I wish I was in FPV mode... but not in my case ;-(
2015-9-13
Use props
russ
New

United States
Offline

hundleton1 Posted at 2015-9-13 01:19
You are in FPV mode change it in the gimbal settings

The OP you have a faulty gimbal you need to ...

I checked again, and I'm still in "Follow" mode. It's not FPV mode.

I think I'll try a full system reset and calibration to see if that fixes it.
2015-9-13
Use props
hundleton1
Captain
Flight distance : 2741657 ft
  • >>>
United Kingdom
Offline

russ Posted at 2015-9-13 14:38
I checked again, and I'm still in "Follow" mode. It's not FPV mode.

I think I'll try a full syste ...

Yea reset full camera and craft settings, possibly toggle the Follow me/ FPV setting a few times to see if it changes.
2015-9-13
Use props
alirz1
Second Officer
Flight distance : 609833 ft
Canada
Offline

Happened to me also. I was flying with gimbel in follow mode. Recorded two videos and noticed that in the second video my camera was tilting when phantom moved sideways. how it changed that might flight i dont know
2015-9-13
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules