Hi

Me and a friend had a discussion tonight. He has a Thor+ 10A 80WT Charger that he use for several types of batteries. He have never had higher then 9000mAh batteries before but now got a Tattu 10.000 mAh. The charger never let him know that its done like with his smaller ones.

The discussion was about if the "done" notification never will come because it will not "pass" the 10.000 "point" teoretical (Sorry for the bad explaining) but it will still charge it full in "real life" even though I guess it would take a few hours.

Just to setttle this once for all for him anyone has the skills to answer his question?

Found the Charger Spec.

AC input 100-240 volt
· DC input 11-18 volt
· Max charger power 80W
· Charge rate 0.1-10.0A
· Discharge rate 0.1-5.0A
· Balancing Lipo 200MA/cell
· NiCD/NiMH 1-15 cells
· LiPo/LiFe/LiLON 1-6 cells
· PB battery voltage 2-20V

Since the max charge rate is 10a that will be a little less than 1c charge rate. It will charge in about 1.5 hours with balancing.

Thanks again!! :-)
Have a great weekend!

The higher mAh lipos that we are now using for the S900 and S1000 are challenging our chargers.  I can only charge one lipo in excess of 10,000mAh lips on my Hyperion Duo 720i.  I need a higher power supply and a different charger.  Blade has one and now is the time for me to upgrade.

Revolectrix PowerLab 8 v2, 1344W 3times parallel 40A on 6S


hi Ed use this one

I have a SkyRC PowerSupply 50A/1200W for Power and a Hyperion EOS 0720i Super DUO3 1000W 20A max and got for spreading with a SkyRC Powerstrip EFuel but newer had to use it.

I have a Tattu PowerSupply ,and my battery's size is 6 cell lipo battery,Tattu 12000mAh 6S1P 15C Lipo Battery.