DJI action 2 Battery draining too fast
215 3 3-14 07:40
Uploading and Loding Picture ...(0/1)
o(^-^)o
Tony3004
lvl.2
Flight distance : 572858 ft

Vietnam
Offline

Hello,as the title my dji action 2 front touchscreen module draining too fast before or after connecting with camera, so how to change another battery cells and how to do it? im from Vietnam.Thanks you!
3-14 07:40
Use props
DJI Paladin
Administrator
Flight distance : 318 ft

Offline

Hi there. Thank you for reaching out and we do apologize for the trouble that this has caused. Can you please tell us how many minutes the unit drains after being installed with a fully charged battery? If you could provide us a short video showing the behavior of the unit that would be very helpful so we can check it further. If the video is available, please upload it via Google Drive or YouTube then send the link here. Please keep us posted.
3-15 00:24
Use props
Tony3004
lvl.2
Flight distance : 572858 ft

Vietnam
Offline

DJI Paladin Posted at 3-15 00:24
Hi there. Thank you for reaching out and we do apologize for the trouble that this has caused. Can you please tell us how many minutes the unit drains after being installed with a fully charged battery? If you could provide us a short video showing the behavior of the unit that would be very helpful so we can check it further. If the video is available, please upload it via Google Drive or YouTube then send the link here. Please keep us posted.

https://youtube.com/shorts/rYl8yV-w_yg?si=9H_HLxtd-7nFHdJh
problem with front screen touch, some time it showing in few minute to dead screenAfter recorded video front screen module battery turn to 50% and conneting camera module again it draining to 0%
3-15 08:49
Use props
DJI Paladin
Administrator
Flight distance : 318 ft

Offline

Tony3004 Posted at 3-15 08:49
https://youtube.com/shorts/rYl8yV-w_yg?si=9H_HLxtd-7nFHdJh
problem with front screen touch, some time it showing in few minute to dead screenAfter recorded video front screen module battery turn to 50% and conneting camera module again it draining to 0%

Thank you for the information provided and we're sorry for the inconvenience. In this case, I'm afraid that you may consider sending in the Front Touchscreen module to us for proper diagnostics. You may contact our team at [size=14.6667px]https://www.dji.com/support to see the best option for you to send the unit to us. You can also try to contact the dealer where you purchased the unit to see if there is available service at your location. We appreciate your understanding and support.
3-18 02:47
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules