Remote ID Matrice M300/M350
236 3 3-22 14:18
Uploading and Loding Picture ...(0/1)
o(^-^)o
djiuser_KlpOcFgrXZzZ
lvl.2
Flight distance : 15258766 ft

Canada
Offline

I am trying to register a fleet of drones under the FAA in the US. I am based out of Canada and cannot seem to find the required "Remote ID SN" to register the drones. Any help is appreciated.


FAA REMOTE ID SN.png
3-22 14:18
Use props
djiuser_KlpOcFgrXZzZ
lvl.2
Flight distance : 15258766 ft

Canada
Offline

I spoke with DJI customer support. For anyone else with this issue, it is the 20 digit flight controller SN. This can be found by doing the following...

  • 1. Set the drone up and connect the controller to the drone
  • 2. Open DJI pilot 2 and go to the camera view
  • 3. Go to the top right ellipsis/settings tab
  • 4. The bottom icon is another ellipsis; select that
  • 5. Select "About"  and locate the 20-digit "Flight Controller SN"

    Hope this helps!
3-22 15:38
Use props
djiuser_KlpOcFgrXZzZ
lvl.2
Flight distance : 15258766 ft

Canada
Offline

I spoke with DJI customer support. For anyone else with this issue, it is the 20 digit flight controller SN. This can be found by doing the following...

1. Set the drone up and connect the controller to the drone
2. Open DJI pilot 2 and go to the camera view
3. Go to the top right ellipsis/settings tab
4. The bottom icon is another ellipsis; select that
5. Select "About"  and locate the 20-digit "Flight Controller SN"

Hope this helps!
3-22 15:40
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

djiuser_KlpOcFgrXZzZ Posted at 3-22 15:40
I spoke with DJI customer support. For anyone else with this issue, it is the 20 digit flight controller SN. This can be found by doing the following...

1. Set the drone up and connect the controller to the drone

Thank you for sharing. This information will be very useful for our users in need. The 20 digits remote ID serial number starts with 1581F.
3-23 02:43
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules