Please select Into the mobile phone version | Continue to access the computer ver.
New DJI Avata 2 Firmware Released (05/28/2024)
12345Next >
25919 194 4-11 05:36
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI Support
Administrator
Flight distance : 2408 ft
Hong Kong
Offline

Overview
  • Date:2024.05.28
  • DJI Avata 2 Firmware: V01.00.0300
  • DJI Goggles 3 Firmware: V01.00.0200
  • DJI RC Motion 3 Firmware: V01.00.0100
  • DJI FPV Remote Controller 3 Firmware: V01.00.0100
  • DJI Goggles 2 Firmware: V01.10.0000
  • DJI Goggles Integra Firmware: V01.06.0000
  • DJI RC Motion 2 Firmware: V01.08.0000
  • DJI FPV Remote Controller 2 Firmware: V02.00.1000
  • DJI Fly App iOS: V1.13.4
  • DJI Fly App Android: V1.13.4

What's New
  • Added support for use with DJI Goggles Integra.
  • Added support for use with DJI Goggles 2.
  • Added support for use with DJI RC Motion 2 and DJI FPV Remote Controller 2 when used with DJI Goggles Integra and DJI Goggles 2.
  • Added support for recording 4K/100 videos.
  • Added support for RID in some regions.
  • Fixed some known issues.

Notes
  • Restart the aircraft, remote control device, and goggles after the firmware update is complete.
  • Note that the firmware update may reset various flight parameters such as RTH Altitude and Maximum Flight Distance. Before updating, take note of your preferred settings and readjust them after the firmware update is complete.
  • If the update fails, restart the aircraft, remote control device, goggles, and the DJI Fly app or DJI Assistant 2 (Consumer Drone Series), and try again.



Overview
  • Date: 2024.04.11
  • DJI Avata 2 Firmware: V01.00.0100
  • DJI Goggles 3 Firmware: V01.00.0100
  • DJI RC Motion 3 Firmware: V01.00.0100
  • DJI FPV Remote Controller 3 Firmware: V01.00.0100
  • DJI Fly App iOS: V1.13.0
  • DJI Fly App Android: V1.13.0

What's New
  • Added Easy ACRO for use with DJI Goggles 3 and DJI RC Motion 3.
  • Added Beginner mode for the aircraft when used with DJI Goggles 3 and DJI RC Motion 3.
  • Added support for Manual Mode when used with DJI FPV Remote Controller 3.

Notes
  • Restart the aircraft, remote control device, and goggles after the firmware update is complete.
  • Note that the firmware update may reset various flight parameters such as RTH Altitude and Maximum Flight Distance. Before updating, take note of your preferred settings and readjust them after the firmware update is complete.
  • If the update fails, restart the aircraft, remote control device, goggles, and the DJI Fly app or DJI Assistant 2 (Consumer Drone Series), and try again.


4-11 05:36
Use props
Oleg-5
lvl.3
Flight distance : 1361952 ft
Russia
Offline

The Avata-2 would have been more successful if it had been possible to fly it with goggles 2 and rc2 from the previous avata-1.  Everyone wants to have several drones in one goggles2 helmet.
4-11 07:28
Use props
DJI Gamora
Administrator

Offline

Oleg-5 Posted at 4-11 07:28
The Avata-2 would have been more successful if it had been possible to fly it with goggles 2 and rc2 from the previous avata-1.  Everyone wants to have several drones in one goggles2 helmet.

Hi, Oleg-5. Please rest assured that we will also convey your compatibility needs for previous accessories like DJI Goggles 2 to our engineers for serious evaluation, and we will continue to introduce more convenient functions. Thank you for your understanding and support.
4-11 19:32
Use props
DAFlys
Captain
Flight distance : 312090263 ft
  • >>>
United Kingdom
Offline

Oleg-5 Posted at 4-11 07:28
The Avata-2 would have been more successful if it had been possible to fly it with goggles 2 and rc2 from the previous avata-1.  Everyone wants to have several drones in one goggles2 helmet.

Some of the review videos have said that goggle 2 support is coming in a later firmware upgrade.
4-12 02:13
Use props
gektron
lvl.1

United States
Offline

Received my Avata 2 today and updated the firmware as prompted by the DJI Fly app. Googles and Motion are now on latest version V01.00.0100 but the Avata 2 is stuck on V01.00.0000 and there is no further prompt for a firmware update.

Worst of all the googles are now reporting incompatible firmware for aircraft/goggles/controller and it won't go away. Not a great introduction to your new model.

Please help and rectify this for me.
4-12 12:45
Use props
UserFromWorld
lvl.1
Flight distance : 275978 ft
Turkey
Offline

Hi all. Avata 1 users have Integra, Googles 2 and FPV Remote Controller 2 so If Avata 2 can be compatible with this all products, it will be better for old users.
4-12 12:55
Use props
=DUH=
lvl.4
Flight distance : 5351325 ft
Germany
Offline

gektron Posted at 4-12 12:45
Received my Avata 2 today and updated the firmware as prompted by the DJI Fly app. Googles and Motion are now on latest version V01.00.0100 but the Avata 2 is stuck on V01.00.0000 and there is no further prompt for a firmware update.

Worst of all the googles are now reporting incompatible firmware for aircraft/goggles/controller and it won't go away. Not a great introduction to your new model.

I have the same issue.
Goggle 3 was updated to v01.00.0100
Motion 3 was updated to v01.00.0100
Avata 2 is still on v01.00.0000 and I get error "incompatible firmware" but DJI Fly App does not offer firmware update.

DJI Assistant 2 recognizes the Avata 2 but shows no firmware, the error message is "Cannot load firmware list"
For all my other devices (Air 3, RC2, Move 3, Goggle 3) the assistant works well.
4-12 13:01
Use props
Pittsy86
lvl.1
Flight distance : 464718 ft
  • >>>
United Kingdom
Offline

gektron Posted at 4-12 12:45
Received my Avata 2 today and updated the firmware as prompted by the DJI Fly app. Googles and Motion are now on latest version V01.00.0100 but the Avata 2 is stuck on V01.00.0000 and there is no further prompt for a firmware update.

Worst of all the googles are now reporting incompatible firmware for aircraft/goggles/controller and it won't go away. Not a great introduction to your new model.

Same issue for me too, pretty annoying, hopefully they can rectify it asap!
4-12 13:05
Use props
Dannyar
lvl.1
Flight distance : 140978 ft
  • >>>
United States
Offline

Pittsy86 Posted at 4-12 13:05
Same issue for me too, pretty annoying, hopefully they can rectify it asap!

Same issue for me. DJI, please fix this ASAP!
4-12 13:20
Use props
MichaelAllen1
lvl.1
Flight distance : 5059659 ft
United States
Offline

Echoing the same incompatible firmware version alert yet reporting no new firmware versions.  I can already see by the number of people posting this problem, it's going to be an issue for many.
4-12 13:31
Use props
lambusser
lvl.2
Flight distance : 436329 ft
  • >>>
United States
Offline

Same here. I wonder if they pulled the Avata 2 FW in the last 24 hours.

Guess we'll just have to wait and see..
4-12 13:40
Use props
BMcPro2
lvl.1
United States
Offline

gektron Posted at 4-12 12:45
Received my Avata 2 today and updated the firmware as prompted by the DJI Fly app. Googles and Motion are now on latest version V01.00.0100 but the Avata 2 is stuck on V01.00.0000 and there is no further prompt for a firmware update.

Worst of all the googles are now reporting incompatible firmware for aircraft/goggles/controller and it won't go away. Not a great introduction to your new model.

I’m having the exact same issue. Very frustrating!
4-12 14:36
Use props
fans5300a7bd
lvl.1

United States
Offline

Same issue here.
4-12 14:43
Use props
djiuser_QwmbdfAk01RG
lvl.1

United States
Offline

typical DJI garbage software / firmware issues. No surprise that it doesn't work. Sending this junk back.
4-12 14:48
Use props
Mir
lvl.4
Flight distance : 2718491 ft
  • >>>
United States
Offline

Same problem here. Unable to fly at the moment.
4-12 14:56
Use props
MichaelAllen1
lvl.1
Flight distance : 5059659 ft
United States
Offline

DJI Assistant 2 works and reinstalls firmware updates on the MC and goggles without issue. But when you connect the drone, it won't even load the firmware list.  Did anyone update the firmware on their goggles and MC before the drone? Is there an update sequence we got wrong?
4-12 15:04
Use props
MichaelAllen1
lvl.1
Flight distance : 5059659 ft
United States
Offline

*****New firmware released... DJI Avata 2 Firmware: V01.00.0200  is available *****
4-12 15:09
Use props
lambusser
lvl.2
Flight distance : 436329 ft
  • >>>
United States
Offline

Update as of 23:13 GMT on 12APR. They DID just push a new FW and I was able to update the Avata 2 and no more warnings!

V01.00.0200

Enjoy!
4-12 15:14
Use props
MichaelAllen1
lvl.1
Flight distance : 5059659 ft
United States
Offline

This update, V01.00.0200, resolves our problem. I just installed it and can confirm it work properly.
4-12 15:24
Use props
Dannyar
lvl.1
Flight distance : 140978 ft
  • >>>
United States
Offline

new update fixed it. glad to see they pushed out an update quickly to resolve this issue.
4-12 18:49
Use props
gektron
lvl.1

United Kingdom
Offline

Could everyone confirm aircraft is at .0200 goggles and controller at .0100 as mine is.

Sorry just paranoid now but not getting the incompatibility warning anymore.
4-12 23:06
Use props
lambusser
lvl.2
Flight distance : 436329 ft
  • >>>
United States
Offline

gektron Posted at 4-12 23:06
Could everyone confirm aircraft is at .0200 goggles and controller at .0100 as mine is.

Sorry just paranoid now but not getting the incompatibility warning anymore.

That's where the versions currently stand. You're good!
4-13 10:48
Use props
SaurabhSrivastava
lvl.4
Flight distance : 2380479 ft
  • >>>
India
Offline

Do not update to 0.02 for avata 2 drone
It will break the FCC ham file mod and it won't work on it anymore. You will be stuck in CE mode if not in the US
4-15 12:32
Use props
djiuser_Ed5QVL1bUTAl
lvl.2
Italy
Offline

hello, in manual mode i have a strange behaviour, on fast turn the drone vibrate, it loses stability, i don't understand why
4-20 10:41
Use props
Luca Rubino
Second Officer
Flight distance : 711512 ft
  • >>>
Italy
Offline

djiuser_Ed5QVL1bUTAl Posted at 4-20 10:41
hello, in manual mode i have a strange behaviour, on fast turn the drone vibrate, it loses stability, i don't understand why

Because it's an Avata. New drone, old issues.
4-20 14:23
Use props
djiuser_cQByEaj33S2i
lvl.1
Flight distance : 267700 ft
United States
Offline

Has anyone had problems with recording a video only to find it did not actually record? Also issues with incorrect date/time of file?
4-20 16:48
Use props
djiuser_gbjzS8p64x8v
lvl.2

United States
Offline

MichaelAllen1 Posted at 4-12 15:24
This update, V01.00.0200, resolves our problem. I just installed it and can confirm it work properly.

How did you install the update? The DJI fly app called for a firmware update at the time I activated the avata 2 and went through the update procedure but did not update to the latest version. I am getting the not matching firmware error in my googles.
4-22 19:24
Use props
djiuser_gbjzS8p64x8v
lvl.2

United States
Offline

djiuser_gbjzS8p64x8v Posted at 4-22 19:24
How did you install the update? The DJI fly app called for a firmware update at the time I activated the avata 2 and went through the update procedure but did not update to the latest version. I am getting the not matching firmware error in my googles.

I got it to update. I had to use my PC and update the DJI assistant app to the latest version so it would see the firmware update for Avata 2. The Googles and Motion controller 3 was at the latest version from updating from the DJI fly app.  
4-22 20:00
Use props
Oleg-5
lvl.3
Flight distance : 1361952 ft
Russia
Offline

I am contacting DJI.  What happened to you?  Why do you have DJI FPV flying since the release date in manual mode and there are no problems. A very successful product and an excellent drone.   But what happened to the AVATA series drones????   They will try to turn off the engines in flight. From the fall, they will fall into a non-corroding flight.  This was on AVATA1 and it remained on AVATA2.  The people began to fall en masse.  In Manual mode, the motors turn off at some point and the drone crashes.  Where are all your testers from where such problems.  This suggests that AVATA is the most unsuccessful product in the DJI line.
4-29 22:10
Use props
DJI Wanda
Administrator
Online

Oleg-5 Posted at 4-29 22:10
I am contacting DJI.  What happened to you?  Why do you have DJI FPV flying since the release date in manual mode and there are no problems. A very successful product and an excellent drone.   But what happened to the AVATA series drones????   They will try to turn off the engines in flight. From the fall, they will fall into a non-corroding flight.  This was on AVATA1 and it remained on AVATA2.  The people began to fall en masse.  In Manual mode, the motors turn off at some point and the drone crashes.  Where are all your testers from where such problems.  This suggests that AVATA is the most unsuccessful product in the DJI line.
https://youtu.be/4ucUzDWVpic?si=HPRarm5xZQCap27B

Hello, there. Sorry for the inconvenience. Seeing that your drone crashed, we would like to if you have created a repair case?
About the issue you said, please be cautious that the attitude of the aircraft will be unstable when it is in Manual mode.
You can check the information in the User Manual, too

4-30 01:59
Use props
fichek
Core User of DJI
Flight distance : 1255715 ft
  • >>>
Croatia
Offline

Oleg-5 Posted at 4-29 22:10
I am contacting DJI.  What happened to you?  Why do you have DJI FPV flying since the release date in manual mode and there are no problems. A very successful product and an excellent drone.   But what happened to the AVATA series drones????   They will try to turn off the engines in flight. From the fall, they will fall into a non-corroding flight.  This was on AVATA1 and it remained on AVATA2.  The people began to fall en masse.  In Manual mode, the motors turn off at some point and the drone crashes.  Where are all your testers from where such problems.  This suggests that AVATA is the most unsuccessful product in the DJI line.
https://youtu.be/4ucUzDWVpic?si=HPRarm5xZQCap27B

This is 100% irresponsible flying. You should have done an emergency motor stop the moment you crashed. I agree it going backwards is not great, but you seriously need to have your finger on that start/stop button and double tap it before it comes to this.

Also, why are you learning freestyle above water, traffic and people? Please stop before you hurt someone and go practice in an open field or something at least.
4-30 03:43
Use props
Oleg-5
lvl.3
Flight distance : 1361952 ft
Russia
Offline

DJI Wanda Posted at 4-30 01:59
Hello, there. Sorry for the inconvenience. Seeing that your drone crashed, we would like to if you have created a repair case?
About the issue you said, please be cautious that the attitude of the aircraft will be unstable when it is in Manual mode.
You can check the information in the User Manual, too

Don't you see that the motors have shut down. The drone fell and hit the ground.  Pay attention to the bitrate.  After hitting 24 mb, it jumped to 50 mb.   So after the impact, the motors were activated and the drone flies away in reverse.  This is a bug in the software. There are no correction factors in such a situation.  AVATA1 had the exact same problem for some people.  Pay attention.
4-30 05:58
Use props
djiuser_3Pa2TZEuYjHi
lvl.1
Flight distance : 1233520 ft
Poland
Offline

SaurabhSrivastava Posted at 4-15 12:32
Do not update to 0.02 for avata 2 drone
It will break the FCC ham file mod and it won't work on it anymore. You will be stuck in CE mode if not in the US

witam
4-30 13:32
Use props
Arri_fpv
lvl.2
Flight distance : 88248 ft
  • >>>
Ireland
Offline

SaurabhSrivastava Posted at 4-15 12:32
Do not update to 0.02 for avata 2 drone
It will break the FCC ham file mod and it won't work on it anymore. You will be stuck in CE mode if not in the US

According to Madtech Ham file still works he updated the video with new info check his channel out. So you can safely update your goggles & drone etc!
4-30 22:30
Use props
SaurabhSrivastava
lvl.4
Flight distance : 2380479 ft
  • >>>
India
Offline

As per the latest update, Ham file will put the drone in high power mode (probably FCC) but it WONT unlock channels if outside US.
To get FCC power along with manual channel selection, you still need the drone-tweak / drone-hacks software.
5-1 00:01
Use props
Evoq
lvl.2

United States
Offline

SaurabhSrivastava Posted at 5-1 00:01
As per the latest update, Ham file will put the drone in high power mode (probably FCC) but it WONT unlock channels if outside US.
To get FCC power along with manual channel selection, you still need the drone-tweak / drone-hacks software.

CE Mode + Ham file gets you 33dBm (1600mw) call it fcc if u like
Regardless of what channel you in its full power RF signal now that’s in 2.4Ghz & 5.8Ghz , no need for any 3rd party hacks or software’s ! by not having options to pick channels makes this irrelevant as you get full rf signal . And no where from DJI or any rep testers have mentioned diffrent rf signal from picking 1-3 channels.
5-1 00:24
Use props
fanse8501217
lvl.2
Flight distance : 148888 ft
Italy
Offline

Evoq Posted at 5-1 00:24
CE Mode + Ham file gets you 33dBm (1600mw) call it fcc if u like
Regardless of what channel you in its full power RF signal now that’s in 2.4Ghz & 5.8Ghz , no need for any 3rd party hacks or software’s ! by not having options to pick channels makes this irrelevant as you get full rf signal . And no where from DJI or any rep testers have mentioned diffrent rf signal from picking 1-3 channels.

In my ham file  tests in CE it increases the power slightly and eliminates the 5.1 GHz which in CE without hacks works very well. The real FCC power in 5.8 GHz and 2.4  is obtained with the dronetweaks app, if then you also add the HAM you get the maximum
5-1 03:15
Use props
Evoq
lvl.2

United States
Offline

fanse8501217 Posted at 5-1 03:15
In my ham file  tests in CE it increases the power slightly and eliminates the 5.1 GHz which in CE without hacks works very well. The real FCC power in 5.8 GHz and 2.4  is obtained with the dronetweaks app, if then you also add the HAM you get the maximum

The CE region Avata 2 drones use Tri-band frequency 2.4-5.1-5.8 it doesn’t eliminates the 5.1Ghz now if u apply HAM file(it will increases the RF output) signal that’s all, to test this accurately you need RF modulator (madtech Ian) has done the test you can find his latest video on YT

CE MODE
5.8Ghz 14dBm 25mw
5.1Ghz 23dBm 200mw
2.4Ghz 20dBm 100mw

CE MODE + HAM FILE
5.8Ghz 33dBm 1600mw
5.1Ghz 23dBm 200mw
2.4Ghz 33dBm 1600mw

so there is MASSIVE increase in RF signal compared

5-1 04:21
Use props
DJI Wanda
Administrator
Online

Oleg-5 Posted at 4-30 05:58
Don't you see that the motors have shut down. The drone fell and hit the ground.  Pay attention to the bitrate.  After hitting 24 mb, it jumped to 50 mb.   So after the impact, the motors were activated and the drone flies away in reverse.  This is a bug in the software. There are no correction factors in such a situation.  AVATA1 had the exact same problem for some people.  Pay attention.

We are unable to determine whether it is the same problem with the video you uploaded. If you have any questions about the accident, you are advised to take data analysis. Our data analysis teams will send you the report.
5-1 04:55
Use props
Oleg-5
lvl.3
Flight distance : 1361952 ft
Russia
Offline

DJI Wanda Posted at 5-1 04:55
We are unable to determine whether it is the same problem with the video you uploaded. If you have any questions about the accident, you are advised to take data analysis. Our data analysis teams will send you the report.

You're masking the problems. Similarly, many people had problems with AVATA-1.  Similarly, some users had a sharp drop and AVATA flew away after the impact.  There are a lot of videos on the web and in chat rooms.   Later, they released a new firmware, but did not indicate which problems were solved.   And your forum is only for beginners who can be fooled or sent somewhere.  You are afraid to admit the problem.
5-1 06:05
Use props
12345Next >
Advanced
You need to log in before you can reply Login | Register now

Credit Rules