How are you Standard owners activating your aircraft? I have the DJI GO app and the manual says to connect to the wifi and then open the app to activate. The wifi network is not showing up. When I open the app, I get an announcement that Phantom 3 Standard requires firmware v1.1.30. There is no firmware on the Standard download page. The Standard page does not list Samsung Galaxy S3 as compatible but people are saying that their S3s are working fine. I don't understand. I got my Standard on Sept 12th after it shipped out on Sept 4th. Are there any changes on how to activate that I don't know about yet?

The firmware update is done via your phone on the standard.   Search and there are posts about this.    It maybe if your standard is brand new it already has the latest firmware

As per your separate post on this subject do you have the phantom and Rac all switched on?    Also do you have the gimble clamp off and the ad card inserted?    If your phone is not picking up phantom wifi is your computer maybe?    And last of all is the battery plugged in and charged.   And also is the Rc charged?

Rac should be rc

I will answer you here versus on the other forum.

It looks like you may be headed for a replacement.

I downloaded the app on a 2011 HP Touchpad running Android v5.02 (Lollipop). This would definitely not qualify as an approved device.

I powered up the aircraft and remote. Went to wifi settings and saw the Phantom network. Entered the password 12341234 and was immediately connected. Went to the app and all seemed functional. I did not try to fly it (not sure if I would try, but I am tempted), but I the camera was working and all looked good.

So, the fact that you cannot connect the controller with the wifi or even see the network is a problem that I believe has no fix besides sending it back?

That's the problem.  Straoght out of the box, no network showing up on my phone or tablet. Probably a defect. Very upset. Qhen I try to reset the wifi the power led on the controller just blinks with nothing else.

amckim2084@hotm Posted at 2015-9-14 06:45
That's the problem.  Straoght out of the box, no network showing up on my phone or tablet. Probably  ...

Have you tried detecting the wifi on another device before you send it back?

could it be my galaxy s3? it supports the go app and all it says is connect the aircraft. is the network specifically designed for compatible devices only?

amckim2084@hotm Posted at 2015-9-14 14:09
could it be my galaxy s3? it supports the go app and all it says is connect the aircraft. is the net ...

i dont know about the standard, but is it on 2.4 or 5ghz, if on 5 ghz is your device wifi capable of 5ghz???

ill have to check when I go to break. I brought it to work to try other devices. nobody seems to have what is listed

amckim2084@hotm Posted at 2015-9-14 14:57
ill have to check when I go to break. I brought it to work to try other devices. nobody seems to hav ...

forget the listed device for time being, all we are doing is to troubleshoot to see if there is a wifi issue with the P3S. if you have a laptop or any device that can pickup both the 5ghz and 2.4ghz, use it to see if you can see the phantom network??

amckim2084@hotm Posted at 2015-9-14 14:57
ill have to check when I go to break. I brought it to work to try other devices. nobody seems to hav ...

just went to the specs of the standard and the RC is at 5GHZ
RC Operating Frequency: 5.725 GHz – 5.825 GHz, 922.7 MHz – 927.7 MHz (Japan)
Video Link: Operating Frequency: 2.400 GHz – 2.483 GHz

my laptop doesn't see phantom either

amckim2084@hotm Posted at 2015-9-14 15:10
my laptop doesn't see phantom either

btw if u dont use the reply button to a post the OP will not get a reminder that there is a reply.

does your laptop have 5ghz wifi capability?
whats the model of your laptop and i ll look it up if u cant

amckim2084@hotm Posted at 2015-9-14 15:10
my laptop doesn't see phantom either

ok the Live View Working Frequency: 2.4GHz ISM.

rayrokni Posted at 2015-9-14 15:21
btw if u dont use the reply button to a post the OP will not get a reminder that there is a reply. ...

Acer aspire one. All I know til I get home.

Also galaxy s3 specs:

http://www.phonearena.com/phones/Samsung-Galaxy-S-III_id6330

rayrokni Posted at 2015-9-14 03:26
ok the Live View Working Frequency: 2.4GHz ISM.

Just tried someone's iPhone 5 and no wifi network showing up

I talk to DJI and after going through all the troubleshooting steps that I've already been through, I will be getting a replacement Standard. It must be a Wi-Fi defect.

amckim2084@hotm Posted at 2015-9-14 23:29
I talk to DJI and after going through all the troubleshooting steps that I've already been through,  ...

i would have to agree, sorry bud

amckim2084@hotm Posted at 2015-9-14 02:09
could it be my galaxy s3? it supports the go app and all it says is connect the aircraft. is the net ...

I guess you did not read my post above ^^^.

I downloaded the app to a 2011 HP Touchpad running Android Lollipop, This would never make an approved device list. It worked fine.
I think a return is in order.

rayrokni Posted at 2015-9-14 03:21
btw if u dont use the reply button to a post the OP will not get a reminder that there is a reply. ...

They did not seem to read my reply anyway......since they keep asking the same question about approved devices.

aopisa Posted at 2015-9-15 00:29
They did not seem to read my reply anyway......since they keep asking the same question about appro ...

you are probably right, but was trying to make sure all other avenues have been covered before he is without the p3 for weeks.
have fun and enjoy