Hello all
I update my P3P to the lastest firmware yesterday. It went normal ..So today Im in the air and flicked to "F" but nothing happpened only a messsage to switch to muliplte fight mode which I did but still no intelligent flight mode screen came up.  Im using a ipad mini.  Any help is appreciated..

Chuck

Your log shows you're attempting to install 1.3.2 again. You'll need to install 1.4 on your Phantom in order to use the new IOC features.

---

www.PhantomHelp.com
Find the latest must-haves, fixes, mods, how-tos, guides, and accessories for your Phantom.
Phantoms in stock and ready to ship worldwide! (see availability)

Phantom Help Posted at 2015-9-13 10:47
Your log shows you're attempting to install 1.3.2 again. You'll need to install 1.4 on your Phantom  ...

My page on DJI PILOT says 1.4 is installed

First of all p mode is not the ioc mode. u need to flip to f mode.
make sure u only have one bin file, the latest, in the root directory of the sd card.

rayrokni Posted at 2015-9-13 10:55
First of all p mode is not the ioc mode. u need to flip to f mode.
make sure u only have one bin fil ...

Sorry my bad..
Yes I was in F mode
The screen shot I posted was from a previous update NOT the card I used to update

cbrenkus Posted at 2015-9-14 02:01
Sorry my bad..
Yes I was in F mode
The screen shot I posted was from a previous update NOT the card ...

if u have fw 14001, then once you have taken off, switch to f mode and if multiple flight mode has been anabled in mc settings , under avaned, the ioc menu will pop up. if you have not enabled it a message will pop up and there u can click on enable.
REMEMBER IOC WILL ONLY WORK ONCE P3 HAS TAKEN OFF

http://forum.dji.com/thread-30495-1-1.html

rayrokni Posted at 2015-9-13 10:55
First of all p mode is not the ioc mode. u need to flip to f mode.
make sure u only have one bin fil ...

My current "about" page on my pilot app page reads
App Version 1,2,0
Firmware Version 1.4.10

Thanks

cbrenkus Posted at 2015-9-14 02:10
My current about on my pilot app page reads
App Version 1,2,0
Firmware Version 1.4.10

need to update the app then

cbrenkus Posted at 2015-9-13 14:10
My current "about" page on my pilot app page reads
App Version 1,2,0
Firmware Version 1.4.10

The latest DJI GO app version is 2.2.0, that might be your issue.

Gabe R Posted at 2015-9-13 11:13
The latest DJI GO app version is 2.2.0, that might be your issue.

Thanks all.. Im updated as I type.

cbrenkus Posted at 2015-9-13 11:23
Thanks all.. Im updated as I type.

Looks like that my have done it . How do I change from ATTI to GPS mode?  I'm getting that" pop up" when I go to P mode

cbrenkus Posted at 2015-9-14 02:36
Looks like that my have done it . How do I change from ATTI to GPS mode?  I'm getting that" pop up" ...

u have the mode switch on top left.
p-gps mode= furthest position on right
att=middle position
f(ioc) mode= furthest position to left

rayrokni Posted at 2015-9-13 11:43
u have the mode switch on top left.
p-gps mode= furthest position on right
att=middle position

Why the drifting in A?

cbrenkus Posted at 2015-9-13 11:48
Why the drifting in A?

I typically have it in P mode but it still says ATTI mode?

cbrenkus Posted at 2015-9-14 02:50
I typically have it in P mode but it still says ATTI mode?

because u r flying in atti mode, where u dont have any gps help
i suggest u watch the videos on youtube and read the manual if you dont want to crash

rayrokni Posted at 2015-9-13 11:51
because u r flying in atti mode, where u dont have any gps help
i suggest u watch the videos on you ...

So just one more..Why does it say "ATTI mode" when its warming up but I'm in the P mode?

cbrenkus Posted at 2015-9-14 03:04
So just one more..Why does it say "ATTI mode" when its warming up but I'm in the P mode?

cuz it hasnt picked up enuff sats

rayrokni Posted at 2015-9-13 12:05
cuz it hasnt picked up enuff sats

Makes sense
Thanks  

cbrenkus Posted at 2015-9-14 03:32
Makes sense
Thanks

wait til the green ready to fly sign in middle top of screen appears. wait til u have 10+ sats. check your compass mod values. make sure batterry is firmly in place.

rayrokni Posted at 2015-9-13 12:35
wait til the green ready to fly sign in middle top of screen appears. wait til u have 10+ sats. ch ...

Ok Thanks for the help

cbrenkus Posted at 2015-9-13 15:59
Ok Thanks for the help

Try this
http://forum.dji.com/forum.php?mod=viewthread&tid=27393&mobile=2

Please "RTFM" before arming the motors.
Play around with these new concepts/practice, on the Phantom 3 SIM too.
& please Remove the props before doing so. ;-)

RedHotPoker