As dji no longer supply mavic 2 batteries would they like to give us the wiring diagram so that we can use 4s or 6s drone batteries?

They come in and out of stock from time to time,  if you are desperate for a battery you can use the Mavic 2 Enterprise Battery, and on first use allow the firmware to update and it will be downgraded to a regular battery.

You don't need a wiring diagram, dismantle the old battery carefully, photograph the connections and annote them so that you know what goes where and you have your 'wiring diagram'. DJI will almost certainly NOT supply one.
ONE MAJOR POINT, jumper the new battery pack to the control board BEFORE you disconnect ANY of the old cells.
If the controll board sees the voltage drop below a certain amount it will switch some chips to open circuit and render the battery useless even with new cells.
Supposedly it is possible to reset the board but I have just tried and had not luck.

Hi there. Thank you for reaching out. Regretfully, we cannot provide specific information. If you want to purchase the DJI Mavic 2 batteries, you may click the link below as it is still out-of-stock on our store website. Should you have other inquiries, feel free to contact us. We appreciate your understanding.

https://www.dji.com/where-to-buy/retail-stores

Plenty on sale on eBay and AliExpress.
https://www.ebay.com/sch/i.html? ... fj7QehoCF8wQAvD_BwE

DAFlys Posted at 4-26 02:45
They come in and out of stock from time to time,  if you are desperate for a battery you can use the Mavic 2 Enterprise Battery, and on first use allow the firmware to update and it will be downgraded to a regular battery.

Thanks i did not know yiu could do that.

Sean-bumble-bee Posted at 4-26 12:04
You don't need a wiring diagram, dismantle the old battery carefully, photograph the connections and annote them so that you know what goes where and you have your 'wiring diagram'. DJI will almost certainly NOT supply one.
ONE MAJOR POINT, jumper the new battery pack to the control board BEFORE you disconnect ANY of the old cells.
If the controll board sees the voltage drop below a certain amount it will switch some chips to open circuit and render the battery useless even with new cells.

Thanks i did know the + and - contact but not what the other pins do and have tried to replace the cells but lost power so bm modual failed. Also did not have a mini welder to join batt cells. It would be better to be able to use 4s or 6s batts as they are cheaper.

Suren Posted at 4-27 16:13
Plenty on sale on eBay and AliExpress.
https://www.ebay.com/sch/i.html?_nkw=dji+mavic+2+battery+new&norover=1&mkevt=1&mkrid=711-153677-346401-4&mkcid=2&mkscid=102&keyword=&crlp=675198188864_&MT_ID=&geo_id=&rlsatarget=dsa-2090654235730&adpos=&device=c&mktype=&loc=9122078&poi=&abcId=9314583&cmpgn=20292565356&sitelnk=&adgroupid=151569741098&network=g&matchtype=&gad_source=1&gbraid=0AAAAAD_QDh_Bz7f1rK3R3OkamJAlKrklY&gclid=CjwKCAjwxLKxBhA7EiwAXO0R0Cf6oX8F0lq8V5B4RgGbimyM23GMfptg4I-Z0SYfBuSxOd6Efj7QehoCF8wQAvD_BwE

Thanks have found batteries in ebay.

DJI Paladin Posted at 4-26 19:13
Hi there. Thank you for reaching out. Regretfully, we cannot provide specific information. If you want to purchase the DJI Mavic 2 batteries, you may click the link below as it is still out-of-stock on our store website. Should you have other inquiries, feel free to contact us. We appreciate your understanding.

https://www.dji.com/where-to-buy/retail-stores

That link comes up with nothing.

RK7dronzy Posted at 4-28 00:59
Thanks i did not know yiu could do that.

The only difference in the two is the software that allows for the enterprise battery to self warm itself,  when you pop it in a non enterprise drone it reverts the firmware to disable that feature.

RK7dronzy Posted at 4-28 01:06
That link comes up with nothing.

Thank you for your response and we're sorry for the trouble. Kindly access it on your web browser. After clicking the link, you will be routed to this page then select the Continent, Country/Region, and State where you in and all the retail stores will show up on this page. Hope this helps.