[size=14.6667px]Someone knows what module is the [19 00] on the log???  

[size=14.6667px]I really need help with this one guys. Im using a Phantom 3 Advanced, the rc is successfully upgraded to the last version. I don't know the Phantom version because I cant connect it to the rc due that I CANT UPDATE THE PHANTOM. And yes, Ive tried for four days every posible thing, formato SD, fresh firmwares, etc. All the normal procedures are clear. Ive tried with every single firmware and always the same error.

[size=14.6667px]Im almost sure this is the problem, at minute 7, after the D D D D the Phantom sudenly starts a DEEEEEEEEE and the gimbal led turns Solid red. Here is what my log says:

[size=14.6667px][00331181]Firmware upgrading[5]...
[size=14.6667px][00333777][19 00] Firmware upgrade start...
[size=14.6667px][00364454][19 00] Firmware upgrade finish failed (step = 2, err = 0x08).
[size=14.6667px][00394533]Done.

[size=14.6667px]As I said, im pretty sure that these is the reason I cant get the complete update. I read that I need a custom update file containing the 19 00 upgrade, I want to know if someone can help me with these... Please!!!

[size=14.6667px](here is the complete log: [size=14.6667px]Dropbox - P3S_FW_LOG_AB.txt[size=14.6667px])

It it does not upgrade and you have tried everything looking at the log you have no version on the Air side it needs to go to DJI

V1.4 contains all the correct updates for your craft

hundleton1 Posted at 2015-9-15 03:29
It it does not upgrade and you have tried everything looking at the log you have no version on the A ...

Thanks Hund!

Can you explain me more about AIR SIDE?

Its all to do with the Air end radio on the P3(wireless link), yours could not detect item 15 then 19 version had gone to all zeroes, it seems the FW update failed and bricked that component,  You could try the service file but if that don't work then it has to go into DJI sadly.