Please select Into the mobile phone version | Continue to access the computer ver.
LB Failsafe
1041 3 2014-12-12
Uploading and Loding Picture ...(0/1)
o(^-^)o
andreaskellerma
New

Switzerland
Offline

Hi
Today I have observed that when I turn of my ground station, the channels freeze on their last position / the air module outputs the last received data on all channels. That would be really different of the classic function of a receiver failsafe including SBus rx...
If this is normal, how does the FC recognize a failsafe condition?
Thanks and regards
Andreas
2014-12-12
Use props
DJI-youzq
lvl.2
China
Offline

It's normal, FC can recognize this condition.
2014-12-13
Use props
Blade_Strike
Super Moderator
Flight distance : 872694 ft
  • >>>
United States
Offline

Just verify that the assistant shows lost RC and that LED shows FS pattern.

You will be fine

2014-12-13
Use props
wh0.is.th3.shad
New

United Arab Emirates
Offline

I've triggered unintentionally failsafe on mine by flying out beyond signal range but it did come back perfectly fine on its own.

The Lightbridge ground unit started picking up video and RC again when each came back into range.

Triggered ATTI mode to regain manual control once in range again.

No problems.

2014-12-14
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules