Hi, is it possible to permanently set rth point back to the controller? i need to take off from a moving boat to film another moving boat, and i would like the rth point to be constantly updated to the position of the rc controller. Air2S + RC Pro

Hi there,
thank you for reaching out.

After the aircraft is powered on, the default Home Point is the first location where the aircraft receives a strong to moderately strong (white) GNSS signal. The Home Point can be updated before takeoff as long as the aircraft receives a strong to moderately strong GNSS. If the GNSS signal is weak, then the Home Point cannot be updated.

If there is a deviation between the updated Home Point position and the actual takeoff position or when the pilot is moving (in this case, the aircraft is not required to return to its automatically-recorded Home Point, such as when following a vehicle or ship), the Home Point must be updated manually.

There are three ways to update the Home Point:
Go to Camera View. Tap “Settings” in the top-right corner. Go to the “Safety” page and tap “Update Home Point”.

1. Tap “OK” directly to update the Home Point to the current aircraft position.

2. Tap the remote controller icon in the top-right corner and then tap “OK” to update the Home Point to the mobile device position. (Be sure that the mobile phone has a strong GPS signal.)

3. Drag the Home Point to any position. Tap “OK” to update the Home Point to the dragged position.

Hope this helps!

Please do not hesitate to reach out to us for additional support. Thank you.

DJI Natalia Posted at 7-7 01:35
Hi there,
thank you for reaching out.

Thank you for the accurate answer. I used this system when I moved from the starting point, but in the case of the moving boat (where I pilot), I would have to continuously update manually. In case of RTH, the drone would return to the last updated point, which might be different from where the controller is at that moment. It would need a way to keep the return point updated at all times (like google maps).
Thank you

djiuser_b2PeKDlfGp6z Posted at 7-7 03:49
Thank you for the accurate answer. I used this system when I moved from the starting point, but in the case of the moving boat (where I pilot), I would have to continuously update manually. In case of RTH, the drone would return to the last updated point, which might be different from where the controller is at that moment. It would need a way to keep the return point updated at all times (like google maps).
Thank you

Hi there,
thank you for reaching out.

We're pleased that it worked out for you. Your feedback and updates are valued and appreciated.

Feel free to contact us for further assistance. Thank you.