Please I do not know anymore what to do:

On the Inspire1 I have: 1.4.0.10
On the RC I have: 1.3.0.00
DJI Go android : 2.1.0

As I can not open IOC (the green buttom stays greyed out) I was thinking my RC firmware is not up to date: need to have 1.3.0.20 but this one is only available for the Phantom3p AND I have no Idea how I can get it in the RC.

I should really like to use the waypoint system in 2 days, but my actual testings on the field don't allow me to open IOC. In F position just homelock or course lock.

Any one who know the point I am missing ?

Thanks. Renaat.

open ioc where?  there is a setting in the menus of the app somewhere to turn ioc on or off, is yours off? your RC has the correct firmware for the inspire.

In advanced settings multiple Flight Mode is enabled but enable IOC is greyed out
Firmware installed as mentioned.
Thanks for answer.

Renaat Posted at 2015-9-17 23:24
In advanced settings multiple Flight Mode is enabled but enable IOC is greyed out
Firmware installed ...

You need to get the Inspire 1 up on air first before you can flip the F-switch to get the waypoints selection icons. It will not show the waypoints if it is on ground.

stan@rcsail.com Posted at 2015-9-18 18:18
You need to get the Inspire 1 up on air first before you can flip the F-switch to get the waypoint ...

It works now, but do not know what was the reason: cleared all cache in the I1, downgraded and upgraded firmware of I1, reinstalled RC firmware, reinstalled DJI Go.

stan@rcsail.com Posted at 2015-9-18 18:18
You need to get the Inspire 1 up on air first before you can flip the F-switch to get the waypoint ...

It works now, but do not know what was the reason: cleared all cache in the I1, downgraded and upgraded firmware of I1, reinstalled RC firmware, reinstalled DJI Go.

It works now, but do not know what was the reason: cleared all cache in the I1, downgraded and upgraded firmware of I1, reinstalled RC firmware, reinstalled DJI Go.