Please select Into the mobile phone version | Continue to access the computer ver.
No GNSS module & GNSS error after firmware update
11049 17 2024-7-20
Uploading and Loding Picture ...(0/1)
o(^-^)o
Luka_BiH_
lvl.4
Flight distance : 853110 ft
Bosnia and Herzegovina
Offline

I flew my drone normaly for days and today i've updated firmware to  01.00.0800 version and now suddenly I get No GNSS module & GNSS error and can't fly ?
Any fix ? Wanted to downgrade firmware but now I see it's not possible any more ....
I can't belive this
2024-7-20
Use props
BaynhamPhoto
Second Officer
Flight distance : 491814 ft
  • >>>
United Kingdom
Offline

I’d suggest a ‘refresh’ option for the firmware .0800 via assistant 2 since downgrade is off the table.
2024-7-20
Use props
Luka_BiH_
lvl.4
Flight distance : 853110 ft
Bosnia and Herzegovina
Offline

BaynhamPhoto Posted at 7-20 12:21
I’d suggest a ‘refresh’ option for the firmware .0800 via assistant 2 since downgrade is off the table.

Tried and no luck
2024-7-20
Use props
BaynhamPhoto
Second Officer
Flight distance : 491814 ft
  • >>>
United Kingdom
Offline


Managed to get all the new updates done can confirm that on first startup of drone no gnss was displayed on remote but after a couple of minutes and reaching 15 sats message disappeared, sat count continued to increase with normal able to hover message & home point update taking place.

Drone on .0800 - ota update
DJI rc on .1600 - assistant 2 required to complete update
DJI fly on 1.13.10 - rc factory reset needed before update would apply

Make sure the drone is able to see the sky to check gnss pick up, good luck on a retry.
2024-7-21
Use props
DJI Natalia
Administrator
Offline

BaynhamPhoto Posted at 7-21 02:00
Managed to get all the new updates done can confirm that on first startup of drone no gnss was displayed on remote but after a couple of minutes and reaching 15 sats message disappeared, sat count continued to increase with normal able to hover message & home point update taking place.

Drone on .0800 - ota update

Hi there, thank you for sharing this information with us and our Forum Community. We want to express our gratitude for  your contribution of sharing your knowledge and the valuable information here.

Thank you for your ongoing support!
2024-7-21
Use props
provanguard
lvl.4
Flight distance : 74911 ft
Denmark
Offline

BaynhamPhoto Posted at 7-21 02:00
Managed to get all the new updates done can confirm that on first startup of drone no gnss was displayed on remote but after a couple of minutes and reaching 15 sats message disappeared, sat count continued to increase with normal able to hover message & home point update taking place.

Drone on .0800 - ota update

From your message I gather that the update on the RC controller is messed up. I have always done an OTA update in the past. Did you try the OTA first and that did not work?
2024-7-21
Use props
BaynhamPhoto
Second Officer
Flight distance : 491814 ft
  • >>>
United Kingdom
Offline

provanguard Posted at 7-21 07:09
From your message I gather that the update on the RC controller is messed up. I have always done an OTA update in the past. Did you try the OTA first and that did not work?

The rc .1600 was not shown only the drone update for .0800, .1600 was only shown after hooking up assistant 2, the fly update was attempted several times before trying an rc reset that did the trick.
2024-7-21
Use props
Luka_BiH_
lvl.4
Flight distance : 853110 ft
Bosnia and Herzegovina
Offline

I have finally solved my problem, in the end it was faulty gps module. It's funny how the problem reappeared always just after firmware update, I guess just a coincidence. I bought replacement module and changed it myself. Now the bird flies again ;)

2024-7-24
Use props
BaynhamPhoto
Second Officer
Flight distance : 491814 ft
  • >>>
United Kingdom
Offline

Luka_BiH_ Posted at 7-24 09:30
I have finally solved my problem, in the end it was faulty gps module. It's funny how the problem reappeared always just after firmware update, I guess just a coincidence. I bought replacement module and changed it myself. Now the bird flies again ;)

[view_image]

Glad to hear the bird flys again
2024-7-24
Use props
Luka_BiH_
lvl.4
Flight distance : 853110 ft
Bosnia and Herzegovina
Offline

BaynhamPhoto Posted at 7-24 10:06
Glad to hear the bird flys again

Thanks man!
2024-7-24
Use props
djiuser_B4FESVfEEgw2
lvl.1
Flight distance : 118389 ft
Indonesia
Offline

I got that error too after firmware update today,this is the first time i got  no gnss error after firmware update,when it happen my Motion controller can't control the drone anymore,try to brake or land the drone but the drone is still going itself until it hit the wall...
Screenshot_20240726_231135.jpg
2024-7-26
Use props
Luka_BiH_
lvl.4
Flight distance : 853110 ft
Bosnia and Herzegovina
Offline

djiuser_B4FESVfEEgw2 Posted at 7-26 07:24
I got that error too after firmware update today,this is the first time i got  no gnss error after firmware update,when it happen my Motion controller can't control the drone anymore,try to brake or land the drone but the drone is still going itself until it hit the wall...

Mine acted little bit differently. The problem never appeared during flight. Only after powering on the drone while waiting to aquire satellites, and it wouldn't let's me fly. I had it like this for few months and over time it gote worse and more often. Putting new module stopped the error.

So yours could be software related. Try refreshing the firmware and recalibrating imu
2024-7-26
Use props
djiuser_VLlml2TgOa4T
lvl.1
United States
Offline

You are not the only one suffering this problem and I am about ready to return the DJI mini 2se I purchased at Sam’s clun and just eat the money I paid for Fly Away service
2024-8-1
Use props
Mark Thorpe
New
Japan
Offline

I'm having this issue and the drone is brand spanking new! All software up to date. Have started and left dron outside where it can see the sky, nothing.
2024-8-9
Use props
Luka_BiH_
lvl.4
Flight distance : 853110 ft
Bosnia and Herzegovina
Offline

Mark Thorpe Posted at 8-9 00:42
I'm having this issue and the drone is brand spanking new! All software up to date. Have started and left dron outside where it can see the sky, nothing.

The guy (from whom I bought gps module) told me that it is one of the mostly sold part...

But if the drone is new ask for replacement
2024-8-9
Use props
djiuser_i6D9ezPjwAJv
lvl.1
Australia
Offline

Hi All,

Got this GNSS Error on my Mini 3 Pro. I can’t fly anymore. Do you know the fix for that?
2024-11-5
Use props
djiuser_i6D9ezPjwAJv
lvl.1
Indonesia
Offline

Got same error just now.
2024-11-5
Use props
Luka_BiH_
lvl.4
Flight distance : 853110 ft
Bosnia and Herzegovina
Offline

As I have told you, I had to replace gps module and everything is ok after that
2024-11-6
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules