make Beta releases supported by default. Its really shame that your application as only work dont start on Beta releases. I have experienced this issue for more that 3 years. Apps dont start and your products are not usable than.

Hello. To better assist you in solving the problem, could you please tell us your phone model?

DJI Susan Posted at 8-30 05:15
Hello. To better assist you in solving the problem, could you please tell us your phone model?

literally ANY phone model in Android BETA program.

My particular one is Pixel 6a, Android 15, build number AP41.240726.010

DZerZy01 Posted at 8-30 10:23
literally ANY phone model in Android BETA program.

My particular one is Pixel 6a, Android 15, build number AP41.240726.010

Hello. We are sorry for any inconvenience. Kindly download the DJI Mimo app via the link below to see if it works.
https://pan-sec.djicorp.com/s/W9cE3ddSBPSPeBg

DJI Susan Posted at 8-31 22:36
Hello. We are sorry for any inconvenience. Kindly download the DJI Mimo app via the link below to see if it works.
https://pan-sec.djicorp.com/s/W9cE3ddSBPSPeBg

Hi,
thanks for this version of application. It starts and works as it was in previous versions at same experience.

However there are still few considerations regarding Livestreaming.(RTMP)
- entering livestream option takes approx - 15 seconds - okay, its mentioned on the stream. It seems like separate application is starting.
- On every start, there is tutorial displayed.
- Only option which is remebered is stream rtmp link.
- usage of internal phone hotspot is available throuhg manual connection. Again, not remembered. I would appreciate check box "Enable and use phone hotspot." without need to enter hotspot name and pwd - for each start it requires this setting and it takes about 2-3 minutes.
- when livestream ends, you are being returned into home screen and camera is disconnected from Mimo. for other camera options like photo, timelapse, etc its not happening.

DZerZy01 Posted at 9-1 10:47
Hi,
thanks for this version of application. It starts and works as it was in previous versions at same experience.

Hi there, we are sorry for the issue you are encountering. Could you please provide a video showing the issue? You may save it through a shareable link like Google Drive and DropBox, then send the link here. We will check this further for you.

Hi,
please check following link: https://drive.google.com/file/d/1YY8vfOPxkDQ4xjpXzEzhuPVdbKf0XSLW/view?usp=sharing

Video description:
0:00 - Starting with Hotspot enabled
0:05 - 0:17 - Device connestion takes about - 12s - this one could be a lot faster, also with proper permission request for an app could be fully automatic, without need of tap to "connect"
0:25 - 0:36 - Preparing to livestream - 10s - might be faster as well
0:39 - 0:46 - Hotspot enablement - 7s - need to enable Hotspot again, due to Hotspot disablement during device connection
0:48 - 1:26 -  Need to MANUALLY connect to hotspot - 38s - this should be automatic!
1:28 - 1:40 - Start - stop livestream for test
1:41 - 2:33 - After end of stream device gets disconnected, would be nice to keep device connected to prevent losing time and hotspot connection again. Look at

In general, with application startup to start stream it takes almost 90sec to start livestreaming. Its really annoying to enable hotspot, put a name of hotspot, and pwd every time before livestream. I believe, that this time might be shortened to about 15-25sec. Hotspot usage, setting (hotspot name and pwd) and enablement should be saved by application, and re-enabled automatically.