So here whats happening. My last two flights I have notice that some time when it's like at 150 meters of distance I get phantom connection broke! But I get it back like in 2 seconds. But today I was like at 20 meters Altitude and 50meters away and got it again.

The atenna it's in 90 degrees and I've been flying in open fields.

What can I do!

BTW Im in FCC mode.

U mean the app appears "connection break" or RC disconnection (yellow leds on drone blinking)?
May be there's EMC devices, radio tower, high-voltage electricity cable around.
All the interference may lead to wifi unstable.

Dboy Posted at 2014-12-16 13:58
U mean the app appears "connection break" or RC disconnection (yellow leds on drone blinking)?
May b ...

I GET CONNECTION BREAK, NOT THE RC. NO YELLOW LEDS ON THE DRONE BLINKING... AND I HAVE FLOW NOT NEAR ANY TOWER OR SOMETHING SIMILAR.

FromAdronesEye Posted at 2014-12-17 05:09
I GET CONNECTION BREAK, NOT THE RC. NO YELLOW LEDS ON THE DRONE BLINKING... AND I HAVE FLOW NOT NE ...

Check if any of the 3 plug on your gimbal are loose. use a tweezers to help when that happens.
and make sure the power is off

Dboy Posted at 2014-12-17 14:29
Check if any of the 3 plug on your gimbal are loose. use a tweezers to help when that happens.
and ...

Thanks! I will check and let you know!