The 420 ESC's now supports the 800 and 960 KV 2312E Motors as well as the older 2212 Motors

2015.09.29
Overview
DJI ESC Assistant software version updated to: v1.4 ESC firmware version updated to: v1.3
Major Updates

The2312E(800KVor960KV) and 2212 motors are now supported by the DJI ESC Assistant.

The E310’s ESC (420S) firmware is now compatible with the 2312E (800KV or 960KV) and
2212 motors.


Notice
Be sure to update the DJI ESC Assistant software to the latest version before updating the E310 ESC firmware or configuring the 2312E (800KV or 960KV) or 2212 motors.

http://www.dji.com/product/e310/download

I have had serious problems after updating my E310 system on my  F550 with the NAZA-M V2. After the 420 ESCs update to 1.3a the aircraft will barely  hover at full throttle. The LEDs turn yellow meaning the motors are at full throttle. They never turned yellow with the 1.2 firmware. The aircraft is very unstable now. I have tried to work with the gain setting with no luck. I wish there was a way to go back to 1.2.

Ive got the same problem now. Did you get to the bottom of it? Nightmare!

billdunow@gmail Posted at 2015-11-21 02:20
I have had serious problems after updating my E310 system on my  F550 with the NAZA-M V2. After the ...

Were you able to solve your problem friend? I'm also having the same problem.

Can we get a solution for this DJI?

billdunow@gmail Posted at 2015-11-21 02:20
I have had serious problems after updating my E310 system on my  F550 with the NAZA-M V2. After the ...

Please try to update the latest firmware. If you still have the same issue then reply me here.

prwells@gmail.c Posted at 2016-2-12 19:01
Can we get a solution for this DJI?

Please try to update the latest firmware. If you still have the same issue then reply me here.

rich@marshalls- Posted at 2015-12-31 21:08
Ive got the same problem now. Did you get to the bottom of it? Nightmare!

Please try to update the latest firmware. If you still have the same issue then reply me here.

DJI-Amy Posted at 2016-2-16 21:48
Please try to update the latest firmware. If you still have the same issue then reply me here.

The current firmware still shows as 1.3a ???  That is the same version with the issues.
What is going on???

prwells@gmail.c Posted at 2016-2-22 00:27
The current firmware still shows as 1.3a ???  That is the same version with the issues.
What is go ...

You could solve the problem ??

prwells@gmail.c Posted at 2016-2-22 00:27
The current firmware still shows as 1.3a ???  That is the same version with the issues.
What is go ...

The firmware was updated but the version stayed the same.

DJI-Amy Posted at 2016-2-17 05:49
Please try to update the latest firmware. If you still have the same issue then reply me here.

Hi,
I have the same issue :/
E310 & ESC - after instal it, I'm download soft and update my brand new system to 1.3a (ESC assistant 1.4) :|
motors work in idle to 50% throttle stick, when I up to 51% or more, all motors has going very quickly to max rpm and LEDs turn to yellow (meaning the motors are at full throttle).

my specs:
F550 frame
Naza M V1 up to V2 link via S.BUS2 to futaba R7008SB
Zenmuse H4-3D
iOSD mini
immersionRC 600mW

gn0m@op.pl Posted at 2016-6-3 07:56
Hi,
I have the same issue :/
E310 & ESC - after instal it, I'm download soft and update my brand  ...

Hello.
According to your description, your ESC should be working normally. No worry about that.

Thanks.

Hi,
it works great

Thanks DJI-Adela.

dji lightbridge of my S900, does not communicate with air and ground system, someone has idea
this problem?