Hello,

can I simply keep the firmware and software of the DJI Groundstation Datalink and the DJI A2 Flight controller
up to date or do they need to meet specific numbers?

Because on Page 41 of the DJI Manual it talks about specific combinations of firmware versions:

http://download.dji-innovations. ... _Guide_v1.18_en.pdf

There it states:

When using the A2 flight control system firmware version V2.1, the firmware of other DJI products used in
conjunction must be matched with the requirements in the table below.


For the 2.4G Datalink it sais those versions for example:


The Ground end V1.0.1.5 & The Air End
V1.0.1.1 & BTU V1.0.1.2
2.4G Bluetooth Datalink V1.0.0.6


Some of those are not very latest, anyhow.
I hope it is right just to keep all of them up to date and then i do not need to worry about specific combinations of firmware.

Hello,

can I simply keep the firmware and software of the DJI Groundstation Datalink and the DJI A2 Flight controller
up to date or do they need to meet specific numbers?

Because on Page 41 of the DJI Manual it talks about specific combinations of firmware versions:

http://download.dji-innovations. ... _Guide_v1.18_en.pdf

There it states:

When using the A2 flight control system firmware version V2.1, the firmware of other DJI products used in
conjunction must be matched with the requirements in the table below.


For the 2.4G Datalink it sais those versions for example:


The Ground end V1.0.1.5 & The Air End
V1.0.1.1 & BTU V1.0.1.2
2.4G Bluetooth Datalink V1.0.0.6


Some of those are not very latest, anyhow.
I hope it is right just to keep all of them up to date and then i do not need to worry about specific combinations of firmware.