Overview

• Date: 2025.01.09
• DJI O4 Air Unit Firmware: v01.00.01.00
• DJI O4 Air Unit Pro Firmware: v01.00.01.00
• DJI Goggles Integra Firmware: v01.07.00.00
• DJI Goggles 2 Firmware: v01.11.00.00
• DJI Goggles 3 Firmware: v01.00.07.00
• DJI Goggles N3 Firmware: v01.00.03.00
• DJI FPV Remote Controller 3 Firmware: v01.00.03.00
• DJI FPV Remote Controller 2 Firmware: v02.00.11.00
  

What’s New

• Added support to use with DJI FPV Remote Controller 2 when using with DJI Goggles Integra or DJI Goggles 2.
• Fixed some minor bugs.
  

Notes:

• Restart the air unit, the remote controller, and goggles after the update is complete.
• If update fails, restart the air unit and DJI Assistant 2 (Consumer Drones Series), then try again.
  

Will there be an update to support the motion controller?

Connect DJI GOGGLES 2 and integrate with DJI NEO. I believe DJI will do it. I will wait in the nearest future.
https://forum.dji.com/forum.php? ... D933%26typeid%3D933

I have just tested the n3 mask and the o4 lite, the visual rendering is not good, things seem smaller, scale at 100% however, nothing to do with a vista and v1 mask which will be much better

and also the race mode in 4.3, while the visual rendering is already not good in 16.9

It would have been perfect without these problems, put all the waste

DAFlys Posted at 1-11 02:30
Will there be an update to support the motion controller?

No!
For many reasons. FPV pilots don't want it. And the most important thing, it doesn't depend on DJI.
Betaflight/INAV developers must lose many time (for free) developing something nobody wants.

and also problem with the n3 mask of scaling of air unit o4 to 100% the image is too small

tom477 Posted at 1-12 15:39
and also problem with the n3 mask of scaling of air unit o4 to 100% the image is too small

It's very clear from the specs that O4 Air Unit (non-Pro, so called "lite") has a much smaller FOV than O4 Air Unit Pro (117.6° vs 155°). Here is a comparison of the same frame from both air units (both mounted on the same drone), "lite" on the left and Pro on the right:



It has nothing to do with Goggles N3, that's just the smaller FOV of the "lite" camera.

Luca Rubino Posted at 1-12 11:59
No!
For many reasons. FPV pilots don't want it. And the most important thing, it doesn't depend on DJI.
Betaflight/INAV developers must lose many time (for free) developing something nobody wants.

Does it not just convert the motion to regular inputs then?   

without talking about the video recording, just the image which arrives in the mask, so the fov ok, if it corrects its going, I don't know if this is possible, but otherwise I can't pilot like that, I have tried, the image is sharper than the vista put the visual rendering by piloting, its fair

But I think I shouldn't have taken this n3 mask, I'm used to flying with the DJI v1 mask, the mask also works visually, as soon as I took off I saw that it there was a problem, or rather these me the problem who didn't know that it would make an fov of 117,6° in image rendering in the mask while piloting, I don't understand why they released the o4 lite in 117,6° then that on the vista it was better, really disappointed. so I put them all up for sale.

o4 air unit pro is out of stock
are they fixing some issues?

GaS-1911 Posted at 1-13 14:19
o4 air unit pro is out of stock
are they fixing some issues?

It's just demand beating supply. If you look at all the separate parts, those are in stock so obviously not pulled.


You can also find it still in stock at some EU FPV stores, here's an example: https://www.drone-fpv-racer.com/en/dji-o4-air-unit-pro-13557.html

DAFlys Posted at 1-11 02:30
Will there be an update to support the motion controller?

How is that supposed to work?

Xviews Posted at 1-13 23:21
How is that supposed to work?

It's just stick inputs at the end of the day.

fichek Posted at 1-12 17:29
It's very clear from the specs that O4 Air Unit (non-Pro, so called "lite") has a much smaller FOV than O4 Air Unit Pro (117.6° vs 155°). Here is a comparison of the same frame from both air units (both mounted on the same drone), "lite" on the left and Pro on the right:

[view_image]

Looking at the O4 Air unit FOV of 117.6° - it seems very narrow and not using the full available lens.
Wouldn't the lens bend at the outside if it's a t max FoV? The o4 4:3 wide, largest possible FoV doesn't.

To be honest stabilizing is not even an option with 117.6° - and this will be a rather bad experience for many coming from 140 - 160° systems.

So please DJI - if it's possible fix and enlarge the FoV on the O4 Air unit so people can at least use different settings or can use stabilzation. There are also many customers that would like to fly really light wings with the unit and they need the stabilization.
Thanks

There are many of us who made our digital debut on Vista and Air Unit,yes,So please DJI , if it's possible fix and enlarge the FoV on the O4 Air unit so people can at least use different settings or can use stabilzation,that it is pleasant to drive, that the sensations are good,thanks.

fansfbcb5237 Posted at 1-14 07:32
Looking at the O4 Air unit FOV of 117.6° - it seems very narrow and not using the full available lens.
Wouldn't the lens bend at the outside if it's a t max FoV? The o4 4:3 wide, largest possible FoV doesn't.

There's lens correction on both cams in all fov settings, here's an example from O4 Air Unit Pro shooting ultra wide in 4:3 - left is goggle view (which always shows wide) and right is same frame from the recorded ultra wide footage. As you can see, the right one shows more vertically and horizontally, but edges are almost perfectly aligned.



I guess DJI could let us turn off lens correction on the Lite, but if you look at how far the lens is from the sensor and how small it is, I doubt we'd gain a lot more.

told us about the o4 lite not the pro, if they can't do something to restore its fair really, I find myself with a mask and o4 lite unusable, took a vista a mask v1 v2, took an N3 and the pro lite these are all weird, impossible to drive like this, the one who says that these are good, he is lying, the vision is not at all good in vision in the mask, the sensations absent.

fichek Posted at 1-14 18:47
There's lens correction on both cams in all fov settings, here's an example from O4 Air Unit Pro shooting ultra wide in 4:3 - left is goggle view (which always shows wide) and right is same frame from the recorded ultra wide footage. As you can see, the right one shows more vertically and horizontally, but edges are almost perfectly aligned.

[view_image]

It's not an issue on the o4 pro but the o4 air unit.
Can you see the lens correction there?

117.6° is obviously really narrow for FPV and there will be a lot of disappointed people if it stays like that.
With stabilization it will be even worse. I really hope they can get the max out of that cam/lens or change it.

edit: seen your other post regarding the Fov comparison - good stuff

Absence of 2.7k 100fps is very upsetting in 4x3... (O4 Pro unit) Such a good product on any other aspects.
Any non-100fps modes in G3 live view feel weird and choppy. 1080p 100fps is VERY nice, however the recording is not nearly as good as 2.7k.
Please, bring back 2.7k 100fps mode like it is on O3, so we can have smooth live view with the decent 2.7k 100fps recording that has room for some cropping and slow mo!

Dji n3 is not binding to dji o4 pro can some one help. I updated all the firmware

Copterlord Posted at 1-23 13:09
Dji n3 is not binding to dji o4 pro can some one help. I updated all the firmware

Do you have O4 Air Unit Pro selected under Status / Switch menu?