Why does this code (Take off with caution (no satellite positioning)) come up everytime I plan to fly? It doesn't seem to bother anything, but I don't know why it is sending this code or how to fix it. If anyone has the answer, please let me know.

Hello Seth,

We appreciate you contacting DJI with your question. Your attention to detail and professionalism are valued.

The notification you are seeing, "Take off with caution (no satellite positioning)," may appear due to environmental conditions, such as being indoors or in locations with poor GPS reception.

To resolve this, we suggest:
1. Try flying in an open space outdoors to ensure a clearer GPS signal.
2. Ensure that your drone's firmware is updated to the latest version.

Thank you for your cooperation and understanding.

Hello and thank you for your time. It does this every time I plan to fly, even in open areas. Also, I belive that my firmware is up to date.

Seth Acree Posted at 3-11 09:12
Hello and thank you for your time. It does this every time I plan to fly, even in open areas. Also, I belive that my firmware is up to date.

Hi Seth, thank you for your update. Could you please let me know if the aircraft has crashed before?

If it has, it is recommended to send the device back to our facility for inspection.

If not, you could try to refresh the firmware again, move to another open area, and test to see if the message still occurs. Thank you.

No, it has not been crashed before

DJI Thor Posted at 3-11 22:20
Hi Seth, thank you for your update. Could you please let me know if the aircraft has crashed before?

If it has, it is recommended to send the device back to our facility for inspection.

No, it has not been crashed before.

Seth Acree Posted at 3-12 04:45
No, it has not been crashed before.

Thank you for your reply. Did you try to refresh it again via DJI Assistant 2 and see if it works?

I don't know how to do that.

Seth Acree Posted at 3-14 07:33
I don't know how to do that.

Hi there. Below is the reference link to update or refresh your drone's firmware using DJI Assistant 2. Thank you.

Link: https://repair.dji.com/help/cont ... ;paperDocType=paper