de23914.gmail
New
Germany
Offline
|
Hi,
just bought a (5 months old with ~5hrs flight on it) pro3 from the widow of a deceased aquaintancee last week and experienced the very same problems as described above, but aditionally have the problem, that the 2.40 app on neither of my iphones/ipads even seems to find the rc at all. All i get is the startscreen with that "howto"-link, but no "cameraview"-button on all my IOS devices (all on 9.1).
I've tried on my S4 mini (didn't work either) and then in a final attempt on my old S3, where at least i was able to enter the cameraview. I was prompted to ugrade the controller, which according to the manual indeed should have been successful, but left me with a nonresponsive connection on the S3 as well (can still enter cameraview, but says "disconnected" now).
So now I have half a dozen mobiles/tablets including a brandnew Ipad mini 2, which I bought yesterday for no other purpose than for the P3, and still can't fly. RC and bird obviously are still paired, I can start engines and probably could start flying without video, but then that's not what I bought it for. THAT I did with my old P1 for two years....
What now? I have no 2.30 app for either IOS nor Android, the rc seems to do nothing when trying to downgrade to 1.03.020 nor upgrade to 1.04.030 via USB, the bird seem to have accepted 1.04.0010, although I'm not sure as the messages in the txt are somewhat irritating. (see below, which is just the last few lines of the *.txt)
========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.
========== 2015.11.08 09:30:33 =====================
Packet: P3X_FW_V01.03.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2015.11.08 10:55:08 =====================
Packet: P3X_FW_V01.03.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Success.
So this is it. :-/ Stuck with a nonresponding rc which I could probably still fly the same way as I did my phantom I for years, but don't not dare yet, as I'm unable to calibrate the compass or anything else. Dammit :-(
any ideas?
cheers Martin
|
|