Phantom 3 won't power up. Getting Compass Error Re-calebrate. After recalibration receive a message. "High levels of electromagnetic interferance have been detected. Ensure that there are no magnets or metal objects nearby and hold the aircraft at least one meter off the ground when calibrating"

I have move into an open field and performed this numerous times with no luck as well as tried other similar locations. I have calibrated IMU and I'm running the latest firmware. Have also checked that Compass cables is firmly conntected. Was thinking it may be a faulty compass as it throws the same error even when the compass is disconected.

If the compass is not working, is this the reason the motors won't power up?

Any ideas? would be greatly appreciated

Phantom 3 won't power up. Getting Compass Error Re-calebrate. After recalibration receive a message. "High levels of electromagnetic interferance have been detected. Ensure that there are no magnets or metal objects nearby and hold the aircraft at least one meter off the ground when calibrating"

I have move into an open field and performed this numerous times with no luck as well as tried other similar locations. I have calibrated IMU and I'm running the latest firmware. Have also checked that Compass cables is firmly conntected. Was thinking it may be a faulty compass as it throws the same error even when the compass is disconected.

If the compass is not working, is this the reason the motors won't power up?

Any ideas? would be greatly appreciated