Hello. I take advantage of this forum to ask how to activate the Failsafe of the Naza V2 in order that the quad returns to home when the transmitter loses the sign or do I extinguish it? Like does the Phantom 2.
Cheers.

Hi, francrev489

here is two method to make the quad return to home

one method is just extinguish your remote controller to activate the failsafe.
the other method is set the manual mode change to failsafe mode to active the function by NAZA assistant software

Please give us more information on radio type.. Futaba fs is completely different than Spektrum

Look my friend, if your tx has a failsafe option then it is preferable to use it (read your tx manual on how to do that). If not then go to assistant menu and enable the RAP (Receiver Advanced Protection) function. That makes the Naza V2 trigger the Go Home mode to bring the model back if it senses no change in the tx signal after 20 secs (that means for the Naza V2 that there is probably no tx signal). But have in mind that this is only functional when NOT in hover. I have this option marked in red circle in the attached image