Please select Into the mobile phone version | Continue to access the computer ver.
Failsafe when signal is lost or power is off
1574 3 2014-9-23
Uploading and Loding Picture ...(0/1)
o(^-^)o
francrev489
lvl.1

Spain
Offline

Hello. I take advantage of this forum to ask how to activate the Failsafe of the Naza V2 in order that the quad returns to home when the transmitter loses the sign or do I extinguish it? Like does the Phantom 2.
Cheers.

2014-9-23
Use props
DJI-Andy
lvl.1

China
Offline

Hi, francrev489

here is two method to make the quad return to home

one method is just extinguish your remote controller to activate the failsafe.
the other method is set the manual mode change to failsafe mode to active the function by NAZA assistant software
2014-9-24
Use props
Blade_Strike
Super Moderator
Flight distance : 872694 ft
  • >>>
United States
Offline

Please give us more information on radio type.. Futaba fs is completely different than Spektrum
2014-9-29
Use props
kosmas
lvl.3

Greece
Offline

Look my friend, if your tx has a failsafe option then it is preferable to use it (read your tx manual on how to do that). If not then go to assistant menu and enable the RAP (Receiver Advanced Protection) function. That makes the Naza V2 trigger the Go Home mode to bring the model back if it senses no change in the tx signal after 20 secs (that means for the Naza V2 that there is probably no tx signal). But have in mind that this is only functional when NOT in hover. I have this option marked in red circle in the attached image
χωρίς τίτλο.jpg
2014-11-26
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules