Hey there everyone

I would like to integrate an InfraRed device (Thermal Camera / Imager) with a stabalized gimbal.
Camera / Imager specs: 14bit with full radiometric capability; > 25Hz frame rate; > 7.5 to 13 µm spectral range; > 382 x 288 pixels; < 80mK thermal sensitivity


A specific combination of the following equipment will be used.
Option 1 Optris:
PI 400 or PI 450 or better camera plus PI NetBox miniature PC
or
PI Lightweight kit (camera and miniature PC combo)

Option 2 FLIR:
TAU 2 radiometric core with the TeAx Thermal Capture Card
or
A35 / A65 with NUC type miniature PC

Option 3 Workswell:
No fixed combination yet

Questions:
Will you be able to integrate any of the above with one of the current DJI gimbals.
Will FPV live video feed be possible with light bridge

Waiting patiently...

Hey there everyone

I would like to integrate an InfraRed device (Thermal Camera / Imager) with a stabalized gimbal.
Camera / Imager specs: 14bit with full radiometric capability; > 25Hz frame rate; > 7.5 to 13 µm spectral range; > 382 x 288 pixels; < 80mK thermal sensitivity


A specific combination of the following equipment will be used.
Option 1 Optris:
PI 400 or PI 450 or better camera plus PI NetBox miniature PC
or
PI Lightweight kit (camera and miniature PC combo)

Option 2 FLIR:
TAU 2 radiometric core with the TeAx Thermal Capture Card
or
A35 / A65 with NUC type miniature PC

Option 3 Workswell:
No fixed combination yet

Questions:
Will you be able to integrate any of the above with one of the current DJI gimbals.
Will FPV live video feed be possible with light bridge

Waiting patiently...