Please select Into the mobile phone version | Continue to access the computer ver.
Skyzone SK01 FPV Gogglrs
746 3 2015-11-29
Uploading and Loding Picture ...(0/1)
o(^-^)o
chorley2
lvl.1

Ireland
Offline

Hi

I'm trying to set up my Skyzone SK01 FPV Goggles to use with an Inspire 1.
I have been through all the 4 bands and there 8 channels, but don't get a picture.
any help appreciated
2015-11-29
Use props
sthuemmel
Second Officer
Flight distance : 1749321 ft
United States
Offline

The Skyzone goggles work in the 5.8 GHz frequency range.   The Inspire 1 is in the 2.4GHz range.
So the Skyzone receiver will not work on the Inspire 1.  Looking on line, it looks like there is a video input to the goggles, so to make them work you need a HDMI to analog video converter to make them work.  You could use the HDMI output out of the Inspire 1 Controller.
Hope that helps....
2015-11-29
Use props
DJI-Tim
DJI team

Hong Kong
Offline

right, i guess you have to go through the HDMI port to make it work properly
2015-11-29
Use props
chorley2
lvl.1

Ireland
Offline

sthuemmel Posted at 2015-11-30 01:30
The Skyzone goggles work in the 5.8 GHz frequency range.   The Inspire 1 is in the 2.4GHz range.
So  ...

I thought as much, I will get a cable.

Thanks
2015-11-30
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules