Please select Into the mobile phone version | Continue to access the computer ver.
Inspire1X3 Camera
935 8 2015-12-7
Uploading and Loding Picture ...(0/1)
o(^-^)o
jackiedh
First Officer
Flight distance : 83589314 ft
  • >>>
United States
Offline

                                                New firmware out for the Inspire 1--makes the X3 Inspire Camera compatible with the OSMO--

The X3 Inspire Camera must be updated in the Inspire not on the OSMO--

Jack               
                                                                                       
                                                                                                                                                                                                                                               
                                                               
               

2015-12-7
Use props
Fred D
Second Officer
Flight distance : 56184 ft
Canada
Offline

Can you provide a link? I am unable to location this firmware on the DJI site
2015-12-7
Use props
jackiedh
First Officer
Flight distance : 83589314 ft
  • >>>
United States
Offline

Fred D Posted at 2015-12-8 01:04
Can you provide a link? I am unable to location this firmware on the DJI site

It's under DJI --Inspire One --Downloads

Jack
2015-12-7
Use props
parkesfran.gmai
Second Officer
Flight distance : 74052 ft
  • >>>
Ireland
Offline

Fred D Posted at 2015-12-7 17:04
Can you provide a link? I am unable to location this firmware on the DJI site

You should be able to find it under Inspire1 downloads
2015-12-7
Use props
Westwoodfilms.c
lvl.3

Canada
Offline

Its working now did a quick video today!
2015-12-7
Use props
Westwoodfilms.c
lvl.3

Canada
Offline

https://youtu.be/lG5li_BYPwo
2015-12-7
Use props
DJI-Amy
DJI team

Hong Kong
Offline

Hi , Jack, thanks for the information!  
1) The X3 gimbal on the Inspire 1 is now compatible with the Osmo. Note that you must attach X3 gimbal to the Inspire 1 before updating the firmware.
2) Do not attach X3 gimbal to the Osmo to update the firmware.
3) Calibrate the Inspire 1 X3 gimbal when using it on the Osmo for the first time.
4) Only use Inspire 1 aircraft to update the Inspire 1 X3 gimbal. Do not use this firmware to update the Osmo gimbal.
2015-12-7
Use props
sdchew
lvl.4

Singapore
Offline

Westwoodfilms.c Posted at 2015-12-8 06:39
https://youtu.be/lG5li_BYPwo

Interesting... the gimbal mount for the camera is on the left right for the Inspire 1 X3 while the actual Osmo is on the right...
2015-12-7
Use props
DJI-Amy
DJI team

Hong Kong
Offline

sdchew Posted at 2015-12-8 09:44
Interesting... the gimbal mount for the camera is on the left right for the Inspire 1 X3 while the ...

Yes, the gimbal roll direction is opposite.
2015-12-7
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules