DJI-Amy
DJI team
Hong Kong
Offline
|
Please check your Osmo problem and see if it's like this: Gimbal limp, led on the handle won't light up after powering on, only the fan is working
Solution: (using the original Osmo camera please)
1) Fully charge the battery until the led light on the charger turns into green.
2)Reboot and upgrade the OSMO: Copy the upgrade bin file into the SD card. Hold the trigger and record button, and pull down the power button at the same time. Hold it until the right led blinks red and green. Then try to upgrade the OSMO into v. 1.2.1.60. (The OSMO will update automatically with the bin file in the SD card, please wait about 20 minutes for the uprade, the left led becomes solid green means the upgrade is successful)
|
|