1.5 on my p3p. 31F when I left the house. Probably 32 by the time I arrived at my flying site. Hovered for a few seconds and gave it close to full throttle. Saw a le voltage warning as all four motors stopped at 20 seconds.  Is the the general  experience of others??

G'day Sploodge,

Here are the results from the log after a successful aircraft and battery update:

[00012557]========== remo-con disconnect. boot(15) ============
[00012611]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x28ee6feb].
[00012664]Packet upgrade start...

[00012725]Packet checking...
[00012779]Packet vlink 01.07.0060 <-> 01.06.0040.
[00012834]Record vlink 01.06.0040 <-> 01.05.0030 (flow = 0).
[00012893]Done.

[00012948]Version checking[1]...
[00013040][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013134][03 06][00] v2.4.10.7 -> v2.4.13.0 need upgrade.
[00013195][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013339][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013459][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013563][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013665][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013765][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013911][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014126][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014266][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014344][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014400][01 00][00] v1.26.4315 -> v1.29.4920 need upgrade
[00014457][01 01][00] v1.26.4315 -> v1.29.4920 need upgrade
[00014526][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014604][09 00][00] v2.13.0.0 -> v2.13.0.0
[00014662]Done.

[00016717]Waiting for user confirm...
[00026778]Timeout, start upgrade automatically.

[00026886]Firmware upgrading[1]...
[00039136][01 00] Firmware upgrade start...
[00012151][01 00] Firmware upgrade finished successfully.
[00012205]Done.

[00012262]Packet [C:\P3X_FW_V01.07.0060.bin] resumed, card sn [0x28ee6feb].
[00012329]Packet vlink 01.07.0060 <-> 01.06.0040.
[00012386]Record vlink 01.06.0040 <-> 01.05.0030 (flow = 0).
[00012440]Version checking[2]...
[00012533][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012633][03 06][00] v2.4.10.7 -> v2.4.13.0 need upgrade.
[00012701][04 00][00] v1.41.0.0 -> v1.41.0.0
[00012833][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012941][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013041][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013142][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013242][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013386][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013478][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013622][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013697][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013757][01 00][05] v1.29.4920 -> v1.29.4920
[00013819][01 01][00] v1.26.4315 -> v1.29.4920 need upgrade
[00013890][08 00][00] v0.13.0.7 -> v0.13.0.7
[00013977][09 00][00] v2.13.0.0 -> v2.13.0.0
[00014036]Done.

[00014094]Firmware upgrading[2]...
[00014256][01 01] Firmware upgrade start...
[00044575][01 01] Firmware upgrade finished successfully.
[00044820][03 06] Firmware upgrade start...
[00337028][03 06] Firmware upgrade finished successfully.
[00337085]Done.

[00337150]Version checking[3]...
[00337252][03 05][00] v34.2.0.9 -> v34.2.0.9
[00337352][03 06][05] v2.4.13.0 -> v2.4.13.0
[00337531][04 00][00] v1.41.0.0 -> v1.41.0.0
[00337672][11 00][00] v1.7.15.1 -> v1.7.15.1
[00337800][12 00][00] v1.10.0.0 -> v1.10.0.0
[00337931][12 01][00] v1.10.0.0 -> v1.10.0.0
[00338035][12 02][00] v1.10.0.0 -> v1.10.0.0
[00338136][12 03][00] v1.10.0.0 -> v1.10.0.0
[00338283][15 00][00] v1.1.2.0 -> v1.1.2.0
[00338396][17 00][00] v1.1.1.7 -> v1.1.1.7
[00338556][17 01][00] v1.0.2.7 -> v1.0.2.7
[00338648][19 00][00] v255.255.255.254 -> v1.0.8.96
[00338707][01 00][05] v1.29.4920 -> v1.29.4920
[00338768][01 01][05] v1.29.4920 -> v1.29.4920
[00338841][08 00][00] v0.13.0.7 -> v0.13.0.7
[00338929][09 00][00] v2.13.0.0 -> v2.13.0.0
[00338995]Packet upgrade finish successfully.



Then I get this for all the other batteries. Does this mean the battery updates have been successful ?

[00012583]========== remo-con disconnect. boot(15) ============
[00012640]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x28ee6feb].
[00012696]Packet upgrade start...

[00012763]Packet checking...
[00012821]Packet vlink 01.07.0060 <-> 01.06.0040.
[00012883]Record vlink 01.07.0060 <-> 01.06.0040 (flow = 0).
[00012946]Done.

[00013002]Version checking[1]...
[00013108][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013202][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013291][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013423][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013532][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013632][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013732][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013832][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013996][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014111][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014252][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014317][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014372][01 00][00] v1.29.4920 -> v1.29.4920
[00014439][01 01][00] v1.29.4920 -> v1.29.4920
[00014514][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014597][09 00][00] v2.13.0.0 -> v2.13.0.0
[00014658]Packet upgrade cancelled at version checking.


Cheers

hello,

I can't or im unable to update the firmware on my remote controller.. i fear i bricked the rc or i dont have the needed firmware to update it to 1.3.20 ... where in the internet do i find all the firmwares to work my way up to 1.3.20?

any help is appreciated
adminescriba@gmail.com

Using phantom 3 professional
Remote controller GL300A
mini ipad or iphone 6 plus

PS: I dont have access to camera view but i have the latest app and the latest firmware in the aircraft. don't ask me how this happened

With the latest DJI go app updated in itunes... i dont have a clue my FW i have on my remote controller.. anyone help?

@sploodge , in your opinion would you say battery version v2.4.10.4 is the main actual corrupt version that was part of P3's dropping?
And if so, based on the update shown(even now around 6 months old)here as being v2.4.10.7, would you consider the firmware versions before v2.4.10.4 to be ok to fly with?

*My reason for these 2 questions are due to I rolled back my A/C firmware in which it appears the battery version also rolled back in the process. I had progressed up to firmware 1.06.0036 then rolled back to 1.04.0010. In my current [03 06] module I have v2.3.0.13. I made the decision to stay here due to the mph being reduced in flights under 70 degrees. Btw, I know this due to test flights and diagnosing my converted TXT and DAT flight logs. Also if you don't know this, there is currently real nice offline converters available.

1320frank@comca Posted at 2016-5-22 09:53
@sploodge , in your opinion would you say battery version v2.4.10.4 is the main actual corrupt versi ...

@sploodge.... Thanks for the response.

sorry to revive an old thread but just wanted some clarification. I recently bought an additional battery for my p3a. I followed the instructions on updating the battery and know that once I turn it on it should flash green red green red. but it didn't do that to me just solid green. so I powered on the RC as well and it told me I needed a battery update. I waited and powered everything down. once I turned it back on and it didn't give me the notification of the battery updated needed. does this mean it was already updated? any help would be appreciated, thanks

Brando1234 Posted at 2015-12-23 20:18
Thanks for advising

When I went to v1.5 only had success file, when i went to v1.6, I had an suuc ...

Hi,

Question: Has anyone experienced "no result"?  Twice now I've followed the instructions to the letter but both times my PP3 just keeping blinking yellow lights and making "da-da-dudu" sounds until the battery finally dies (which takes a really long time).  To be clear, I have three batteries but only this one is giving me attitude.

Below are the contents of the text file.  My attempt today doesn't seem to be recorded.


========== 2016.06.29 21:46:13 =====================
Packet: P3X_FW_V01.09.0060.bin
Upgrading ...

========== 2016.06.29 21:51:00 =====================
Packet: P3X_FW_V01.09.0060.bin
Upgrading ...
Result: Success.

========== 2016.06.29 22:15:04 =====================
Packet: P3X_FW_V01.09.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.06.29 22:27:43 =====================
Packet: P3X_FW_V01.09.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.09.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.09.0060.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.09.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.09.0060.bin
Upgrading ...
Result: Success.


.....................................

Maybe there is a malfunction somewhere else?  I mean, I decided to try running the upgrade today because I got a "Firmware Required" error message on the DJI Go app yesterday.

Thoughts?

Thanks,

DC

Hey Sploodge! That was an awesome explanation.

I am still having issues installing the newest firmware on a PH3 PRO. I even tried the hard reset for firmware and re-installing it from zero but eventually it always goes back to the red light and horrible failure sound! lol

I did check the logs and it seems like its failing with the version checking in some lines and im pretty sure this is the reason why it keeps failing. How can I fix this? Is this a hardware fail?

Thanks!

[00241632]Version checking[2]...
[00241738][03 05][00] v34.2.0.9 -> v34.2.0.9
[00241839][03 06][00] v2.4.20.18 -> v2.4.20.18
[00241916][04 00][00] v1.44.0.0 -> v1.44.0.0
[00242063][11 00][00] v1.8.0.0 -> v1.8.0.0
[00242198][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00242273][11 01][00] v1.8.0.0 -> v2.0.0.33
[00242388][12 00][00] v1.10.0.0 -> v1.10.0.0
[00242512][12 01][00] v1.10.0.0 -> v1.10.0.0
[00242626][12 02][00] v1.10.0.0 -> v1.10.0.0
[00242752][12 03][00] v1.10.0.0 -> v1.10.0.0
[00255333][15 00][00] device not detected.
[00255449][17 00][00] v1.1.1.7 -> v1.1.1.7
[00255608][17 01][00] v1.0.2.7 -> v1.0.2.7
[00255709][19 00][00] v1.0.8.96 -> v1.0.8.96
[00255781][01 00][00] v1.30.5036 -> v1.30.5036
[00255862][01 01][00] v1.30.5036 -> v1.30.5036
[00268436][08 00][00] device not detected.
[00268528][09 00][05] v3.0.0.10 -> v3.0.0.10
[00268599]Packet upgrade failed at version checking.