stan
Second Officer
Flight distance : 8834869 ft
Hong Kong
Offline
|
I am still not able to connect it to DJI GO, tried IOS and Andriod versions, but still not success.
The Camera View screen still shows Disconnected, therefore, all other paratmeters in the setting pages can not be set, function including as a master linking to another Insipre 1.
My friend flew his Inspire1 with this RC right up to the crash, and his Insipre1 was totally distroyed, since then he didn't touch on this RC.
Could it be possible if this RC was locked into a special state just right up to the crash?
Or should this RC need to connect to its binded Inspire 1 (crashed) first before listening from DJI GO through USB port? this is not possible now as the craft was totally distroyed.
I really exhausted all means of salvageing it, I have tried different SD cards, different USB versions (2.0 and 3.0), connected it to the camera gimble, used different versions of firmware bin files, from V1.02.00.17 to the latetest V1.06.00.40, even tried different versions of DJI GO and DJI Pilot on IOS and Andriod devices. also tried reset the RC with C1+C2+Trigger, all failure!
My only guess is now either it is hardware failure, which is very unlikely as it was really working fine before, or parts of the firmware are corrupted which disables its communication throu USB.
Any other suggestion? |
|