DJI Releases New Firmware for the Phantom 3 Series.

New firmware updates are available for thePhantom 3 series, please visit the Phantom 3 Professional and Phantom 3Advanced product pages to download and update your firmware. For Phantom 3 Standard, please update via DJI GO app.

Overview：

1.      All-in-Onefirmware version for the Phantom 3 Professional and Phantom 3 Advanced updatedto：v1.6.0040;firmware version for the Phantom 3 Standard updated to：v1.3.0050

2.      DJI GO appiOS version updated to: v2.4.2

3.      DJI GO appAndroid version updated to: v2.4.3

What’s New：

1.      In coldenvironments, propulsion output is automatically adjusted based on batterytemperature and cell voltage. Horizontal and vertical speed is also decreased to avoid triggering battery protection.  

2.      Optimized battery management.

Notes：

1.      Users are advised to update all the Intelligent Flight Batteries with this All-in-One firmware.

2.      The firmware for the Phantom 3 Professional and Phantom 3 Advanced can be downgraded to v1.5.30.

3.  Do not power off the remote controller or exitthe DJI GO app during the Phantom 3 Standard firmware update.

Thanks Dji
Looking forward to trying it.

The release notes mentions nothing about fixing vibrations in 1.5.3 everyone was experiencing. So no fix?

That is so cool.

Is the vibration issue fixed in this firmware? Can we fly safely?

Evrybody test firmware?

BIGDZ Posted at 2015-12-22 13:48
The release notes mentions nothing about fixing vibrations in 1.5.3 everyone was experiencing. So no ...

I'll not be trying it until it's verified, since there's no return to 1.4 if it doesn't fix the vibration issues.  It's pretty poor if not, especially as it's effectively a one-way trip to not being safe to fly.

Can anyone verify if the problems have been addressed?

nigelwilkins Posted at 2015-12-22 15:04
I'll not be trying it until it's verified, since there's no return to 1.4 if it doesn't fix the vi ...

I had no problems with last firmware,have done the latest firmware still no problems
Other than the sd card says 1.6004 and on the app it says 1.5 3+

I will try it out this holiday, I have already recharged my batteries for the test, and I don’t think it could be worse than it is already.

I see that the firmware mentions ->   In cold environments, propulsion output is automatically adjusted based on batterytemperature and cell voltage. Horizontal and vertical speed is also decreased to avoid triggering battery protection.  What *specifically* code wise does this address?

I had the vibrations when I first did the update than after a few times of downgrade/upgrade of fw and and cold imu, compass cal, the vibrations are no longer there. I'm just a little apprehensive to update, thinking it might screw things up... So to speak.

Forgot to mention I lowered all the gains to 90%

Seem there is finally a 2.7 K option available on the Professional

2.7 was available before this 1.6 update.

From last firmware update,
[00013377][03 06][00] v2.4.0.5 -> v2.4.10.7 need upgrade.

I know that [11 00][00] is battery.
What is code [03 06][00] in the firmware? Now I know [03 06] its (MC) module.

Is there any page where I can see what all this firmware code numbers means?
Thanks.

My DJI GO appiOS version is 2.4.3 and has been since 18/12 according to the App Store ?

I notice that my DJI GO appiOS version is now crashing out every time I hit the 'camera' button on the main page. I'm running iOS 9.2.

Anyone experiencing similar ? I've tried resetting the iPad Mini 2 but no change....

All a bit frustrating as I was about to hand over to the missus to gift wrap for Xmas day.....thinking that there wouldnt be a firmware update SOOOO close to Xmas......because that would be quite frustrating for all those customers opening their Phantoms on Xmas day.....and having to go through firmware update saga !
EDIT: Ok - uninstalled App and reinstalled....and we seem to be working again....bit frustrating though - maybe linked to iOS 9.2 upgrade ?

Yes, for the first time when opening the app on IOS it may shut down. Deleting the app, power cycling, then reinstalling the app will resolve it.

DJI-Ken Posted at 2015-12-22 18:15
Yes, for the first time when opening the app on IOS it may shut down. Deleting the app, power cyclin ...

Ok - so my App is saying the Aircraft version is 1.5.30+ should I not expect a version similar to the bin file ie 1.6.40 ?

I open the .txt file on the SD card and its saying:
========== 2015.12.22 18:04:04 =====================
Packet: P3S_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

That is correct, in the about page it will say  1.5.30+, instead of 1.6.0040

Ok, so I tried the upgrade again and checked the txt file and am now getting the following:
========== 2015.12.22 18:04:04 =====================
Packet: P3S_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3S_FW_V01.06.0040.bin
Upgrading ...
Result: Success.

But on connecting with the iOS app - I've got the following:
App: Version 2.4.3
Aircraft: Version 1.5.30+
RC: Version 1.5.70

Are these the correct version numbers following P3A upgrade to to P3S_FW_V01.06.0040.bin please ?

Hang on a minute.....that filename looks suspiciously like it should read P3A_FW.... rather than P3S_FW.. or am I clutching at straws here ?

No prompt to upgrade battery or RC at all...

What am I doing wrong here ?

DJI-Ken Posted at 2015-12-22 18:33
That is correct, in the about page it will say  1.5.30+, instead of 1.6.0040

Yep, I have wifi (and internet connection) on the App. Powered it up but still showing as 1.5.30+

Flipperman Posted at 2015-12-23 02:51
Yep, I have wifi (and internet connection) on the App. Powered it up but still showing as 1.5.30+
...

I edited my previous post, the app will say 1.5.30+ after updating to 1.6. But the TXT file on the SD card will say 1.6

DJI-Ken Posted at 2015-12-22 19:06
I edited my previous post, the app will say 1.5.30 after updating to 1.6. But the TXT file on the  ...

Ok thanks - and NO battery update ?
Yes, this version includes a battery update. So after updating everything, you still need to install each battery and have the BIN file on the SD card and powerup only the aircraft.
The update shouls only take a few minutes since only the battery is being updated.

Done and done, x 5!
This update went along very smooth and clean for me.
Happy that I followed instructions and have it all taken care of.

RedHotPoker

RedHotPoker Posted at 2015-12-23 05:37
Done and done, x 5!
This update went along very smooth and clean for me.
Happy that I followed instr ...

Good deal, I'll update my P3 Pro and Inspire V2 tonight, I'm expecting a smooth process.

I'm confused which one to update first. The P3 or the RC/Controller?

(Does it matter? which one to go first?)

juanpaulofloren Posted at 2015-12-22 17:52
I'm confused which one to update first. The P3 or the RC/Controller?

(Does it matter? which one to  ...

The P3, as there is no controller update this time

Yes, just the drone, oh and all of your intelligent flight batteries as well. ;-)

This update will be very helpful for us winter pilots.

RedHotPoker

RedHotPoker Posted at 2015-12-22 20:59
Yes, just the drone, oh and all of your intelligent flight batteries as well. ;-)

This update will  ...

Agreed. Now all I need is some snow. Been really warm in Indiana so far

Jkeller84 Posted at 2015-12-22 21:07
Agreed. Now all I need is some snow. Been really warm in Indiana so far

I must be one very lucky guy.

Bought the P3P last June.

Read the user's manual about 10 times before flying.

Performed every single firmware update (aircraft, RC, battery) that ever came out (including today's).

Never had an issue, ever. No flyouts, no vibration, beautiful videos, and an incredible pleasure flying this Phantom and fillming incredible videos. Every single time I fly it, I am truly amazed with the technology (engineering, information technology, software, hardware).

Thank you DJI for such a great product and do keep up the good work.

And yes, once in a while I go back and read the user's manual just to be on the safe side.

Did the latest firmware update tonight and all is good.

Have a great time you all and enjoy.

I live in a warm climate, so do I need to still update, and why?  Thanks.

Question:  I have P3S upgrade is successful, how do I do the battery update? Just turn off drone insert battery and turn it on?

Arvs Posted at 2015-12-22 20:48
Question:  I have P3S upgrade is successful, how do I do the battery update? Just turn off drone ins ...

When you did the PS3, the batery also got upgraded.  If you have extra batteries, turn off PS3, insert new battery, and turn on PS3.  Repeat for each extra battery.

carloss66 Posted at 2015-12-22 19:23
When you did the PS3, the batery also got upgraded.  If you have extra batteries, turn off PS3, ins ...

thanks for the info appreciate it, also is there a way for me to know that the update is done? like a sound or something? how long should I let the  battery in the drone before turning it off and putting the other battery?

DJI-Ken Posted at 2015-12-22 10:06
2.7 was available before this 1.6 update.

Ken, was this battery issue a problem on older firmware? I am still on 1.3.20 and like how it flies. If it was not an issue on older firmware I would like to stay put for awhile.

Arvs Posted at 2015-12-23 12:03
thanks for the info appreciate it, also is there a way for me to know that the update is done? lik ...

It should be less than 5 minutes for battery upgrade. When LED status is normal flashing, it's done.

bigskyflyer Posted at 2015-12-23 12:22
Ken, was this battery issue a problem on older firmware? I am still on 1.3.20 and like how it flie ...

Totally up to you, 1.5 addressed batteries issues as well as 1.6

See the Battery Update info. Watch the LED diode status.
When the intelligent flight battery, update is happening, you will see the lights change from their normal blinking.
Once they have returned to a normal pattern the firmware has already completed the upgrade.

Time: Less than five minutes per battery. ;-)

RedHotPoker

DJI-Ken Posted at 2015-12-22 15:37
Good deal, I'll update my P3 Pro and Inspire V2 tonight, I'm expecting a smooth process.

Eh, that is incredibly Awesome of you to report. & please don't hesitate to let us know how it eventually goes? We are only here, to give you assistance and guidance when ever it's rquested. ;-)
I bet you do these updates on a regular basis, and enjoy the procedure just as much as I have.
Of course owning a trouble free drone, does make all the difference.
We are of the lucky majority, & have nothing to fear, or for that matter for a fix really, either. . .
Just more awesomeness, and memorable flights with 4K video to prove it. Ha

RedHotPoker

Jkeller84 Posted at 2015-12-22 19:07
Agreed. Now all I need is some snow. Been really warm in Indiana so far

From what I gathered watching the NBC & ABC national news this evening,  there are going to be many southern United States who are going to experience a brown Christmas, without any snow on the ground, or covering the evergreens.

That's one thing I wouldn't trade. ;-)
Having 4 distinct seasons just makes sense..

RedHotPoker