Hi,
Does anyone know of a way to tighten the ariels on the remote contoller. Mine are fairly loose on in the lefrt and right direction when seen from above..  I have tried twisting them but that doesnt seem to do anything.
Thanks,

Have you tried super glue
seriously, I have looked at this myself and the mount appears to tighten from the inside.  This would mean it is non-user adjustable... Maybe one of the DJI guys can comment on this further. After the warranty period you can crack open the remote case and fix this yourself


Rich

RichJ53 Posted at 2015-12-27 02:46
Have you tried super glue
seriously, I have looked at this myself and the mount appears to tighte ...

Yeach, the things need to be tighten from inside, but we don't recommend to disassemble the remote controller yourself .   I don't know if the super glue is a good solution or not...

DJI-Tim Posted at 2015-12-26 21:02
Yeach, the things need to be tighten from inside, but we don't recommend to disassemble the remote ...

Tim,

super glue was a joke, do not use glue   

Rich

RichJ53 Posted at 2015-12-27 13:34
Tim,

super glue was a joke, do not use glue   

RichJ53 Posted at 2015-12-27 00:34
Tim,

super glue was a joke, do not use glue   

lol I thought you were serious for a second. {:3_48:}

teamnest1 Posted at 2015-12-27 07:07
lol I thought you were serious for a second.

I better watch what I say...

Rich

Maybe if you can find a wider than normal zip tie you could place it over the silver part of the antenna connector (non-rotating part) and the white part of the antenna (rotating part of the antenna) and there would be enough friction to keep the antennas in place. Just a thought. Purple area is where I am thinking the zip tie would go.

Try a small peace of heat shrink tubing and heat it up.   :-)

vonbaron1 Posted at 2015-12-28 23:10
Try a small peace of heat shrink tubing and heat it up.   :-)

Thanks guys,
These all sound great but is there an official DJI, permanent solution?