Hi Guys,

I can't seem to get my Ronin to go back to its first possition. I am not sure if its me or I have a broken Ronin. It is really slow to respod to pans or tilts. Take a look at the pic. As you see it end on a possition which is not quite centre. I have blanced the camera on there really well as I have used the Movi M10 & M15 many times.

I have also played with all the settings for hours and I can't seem to get it to work propaly. Any ideas?

I have the same problem after using the "Calibrate System" :@

To make it worse the "Calibrate Center" does not work.

You should try (If you have not already) installing the latest Assistant Software and DJI Ronin Firmware
Found here http://www.dji.com/product/ronin/download
If you already have all the latest files try resetting to default settings Under the "More" section.

This topic explains the order as per versions you need to install the App and Firmware.
http://forum.dji.com/forum.php?m ... ra=page%3D1&lang=en

DJI-Darryl Posted at 2015-1-3 09:02
You should try (If you have not already) installing the latest Assistant Software and DJI Ronin Firm ...

Thanks I will give it a try.

Did "Calibrate center" not work?  Can you control pan and tilt via the remote?

I have this same issue. Now its starting to do a horizon tilt as well...

SmoothTrack Mode has completely stopped working.

DJI-Darryl : I can't understand what the poster is trying to saying with the app and firmware versions posts here: http://forum.dji.com/forum.php?m ... ra=page%3D1&lang=en

Does he mean you have to install all firmware versions in order? I only see the latest version available for the Ronin Assistant Software... (v1.4) which is what I used to update the gimbal a while back...

I guess what I mean is, if all that is available is the latest (1.4) then how would I have installed the other previous ones for the Ronin? Little confused here as the gimbal appears to work still (with remote) just doesn't respond as usual while being held.